Encapsulated Fatty Acids in an Acrylic Resin as Shape-stabilized Phase Change Materials for Latent Heat Thermal Energy Storage
The DOI matches its Crossref record.
Abstract
This article aims to prepare novel shape-stabilized phase change materials (PCMs) by encapsulating fatty acids (stearic acid [SA], palmitic acid [PA], and myristic acid [MA]) as a PCM in an acrylic resin (Eudragit E) as supporting material and to determine latent heat thermal energy storage (LHTES) properties. The maximum percentage of all fatty acids in the shape-stabilized PCMs was found to be 70 wt% in which no fatty acid seepage was observed as the blends were heated over the melting points of the fatty acids. The optic microscope (OM) investigation demonstrated that fatty acid domains were coated by Eudragit E. Fourier transform infrared (FT-IR) results revealed that the interactions between Eudragit E and fatty acids were only adequate for adhesion of Eudragit E on fatty acid domains. Single phase was observed for the blends by OM, and interactions between the components were investigated by FT-IR spectroscopy. The melting and freezing temperatures and latent heats of the shape-stabilized PCMs were measured by the differential scanning calorimetry (DSC) method. Based on the results, it was concluded that Eudragit E/MA, Eudragit E/PA, and Eudragit E/SA blends (30/70 wt%) have good utility potential for LHTES purposes in terms of their satisfying thermal properties and advantages of easy preparation in desired dimensions, direct usefulness function in LHTES systems, and cost effectiveness.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Phase change materials for thermal energy storage
Pielichowska, K., & Pielichowski, K. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.03.005 · Cited by 2,106
Umair, M. M., Zhang, Y., Iqbal, K., Zhang, S., & Tang, B. (2019) · Applied Energy · doi:10.1016/j.apenergy.2018.11.017 · Cited by 852
Fatty acids as phase change materials: A review
Yuan, Y., Zhang, N., Tao, W., Cao, X., & He, Y. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.08.107 · Cited by 755
A review of potential materials for thermal energy storage in building applications
Tatsidjodoung, P., Le Pierrès, N., & Luo, L. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.10.025 · Cited by 643
Kalnæs, S. E., & Jelle, B. P. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.02.023 · Cited by 585
Metadata
- Authors
- Kaygusuz, K., Alkan, C., Sari, A., & Uzun, O.
- Venue
- Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Publisher
- Informa UK Limited
- Published
- 2008-04-10
- Volume
- 30
- Issue
- 11
- Pages
- 1050-1059
- ISSN
- 1556-7036 (ISSN-L)
- 1556-7230
- OpenAlex
- W2091766535
- Cited by
- 50
- References
- 0
- FWCI
- 3.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Encapsulated Fatty Acids in an Acrylic Resin as Shape-stabilized Phase Change Materials for Latent Heat Thermal Energy Storage. https://app.cochat.ai/papers/10.1080/15567030701258212
- The paper
- Kaygusuz, K., Alkan, C., Sari, A., & Uzun, O. (2008). Encapsulated Fatty Acids in an Acrylic Resin as Shape-stabilized Phase Change Materials for Latent Heat Thermal Energy Storage. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. https://doi.org/10.1080/15567030701258212
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.