CoChat

Bioplastics and Petroleum-based Plastics: Strengths and Weaknesses

Gironi, F., Piemonte, V. · 2011 · Energy Sources, Part A: Recovery, Utilization, and Environmental Effects

The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.

Abstract

The application of biomass, such as starch, cellulose, wood, and sugar, used to substitute fossil resources for the production of plastics, is a widely accepted strategy towards sustainable development. In fact, this way a significant reduction of non renewable energy consumption and carbon dioxide emission is accomplished. In recent years, several typologies of bioplastics were introduced and the most important are those based on cellulosic esters, starch derivatives, polyhydroxybutyrate, polylactic acid, and polycaprolactone. Nowadays, the most important tool to evaluate the environmental impact of a (bio)plastic is the life cycle assessment that determines the overall impact of a plastic on the environment by defining and analyzing several impact categories index like the global warming; the human toxicity; the abiotic depletion; the eutrophication; the acidification; and many others directly related to the production, utilization, and disposal of the considered plastics. The aim of this work is to present a comparison between bioplastics and conventional plastics through the use of the “Life Cycle Assessment” methodology. In particular, the life cycle assessment's Cradle to Grave of shoppers made from Mater-Bi (starch-based plastic) an polyethylene were reported and compared as a case study in order to highlight the strengths and weaknesses of the bioplastics and the conventional plastics.

Overview

Integrity signals

Registry

Crossref · 10.1080/15567030903436830

Cites

16 of 16 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 16 references

Research works printed but not linked: 5

  1. Gross R. A., 2002, Gren Chem., 297, 803
  2. Hoppenheidt, K. and Trankler, J. Biodegradable plastics and biowaste options for a common treatment. Proceedings of the Biowaste '95 Conference. May21–24, Aalborg, Denmark.
  3. Krueger M., 2009, Life cycle assessment of food packaging made of Ingeo biopolymer and (r)PET
  4. Patel, M. Life cycle assessment of synthetic and biological polyesters. Proceedings of the International Symposium on Biological Polyesters. September22–26, Munster, Germany.
  5. Widdecke H., 2008, Processing Parameters and Technical Characteristics, A Global Overview

Cited by

See all 340

Metadata

Authors
Gironi, F., & Piemonte, V.
Affiliations
Sapienza University of Rome (IT)
Venue
Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
Published
2011-08
Volume
33
Issue
21
Pages
1949-1959
ISSN
  • 1556-7036 (ISSN-L)
  • 1556-7230
OpenAlex
W1976866814
Cited by
340
References
16
Citations by year
2026: 15 · 2025: 33 · 2024: 53 · 2023: 46 · 2022: 39 · 2021: 50 · 2020: 35 · 2019: 23 · 2018: 8 · 2017: 14 · 2016: 5 · 2015: 3 · 2014: 7 · 2013: 3 · 2012: 6
FWCI
2.09
Type
journal article
Language
en
Open access
closed
Locations
  • Energy Sources Part A Recovery Utilization and Environmental Effects (publishedVersion)
  • IRIS Research product catalog (Sapienza University of Rome) (submittedVersion)
Topics
  • Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
  • Physical Sciences › Environmental Science › Environmental Engineering › Environmental Impact and Sustainability
  • Physical Sciences › Environmental Science › Pollution › Microplastics and Plastic Pollution
Keywords
bioplastics, petroleum-based plastics, life cycle assessment, starch-based bioplastics, Mater-Bi, polyethylene, starch derivatives, polyhydroxybutyrate, polylactic acid, polycaprolactone, environmental impact, CO2 emissions

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Bioplastics and Petroleum-based Plastics: Strengths and Weaknesses. https://app.cochat.ai/papers/10.1080/15567030903436830
The paper
Gironi, F., & Piemonte, V. (2011). Bioplastics and Petroleum-based Plastics: Strengths and Weaknesses. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. https://doi.org/10.1080/15567030903436830

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.