The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Material characterisation and process development for chocolate additive layer manufacturing
Abstract
This paper describes the development of a novel fabrication method known as chocolate additive layer manufacture (ChocALM). The system has been developed for the layer-by-layer manufacture of creative and personalised three dimensional (3D) chocolate products. This study investigates the material and property behaviour of a commercial chocolate. Deposition experiments have been carried using the newly developed ChocALM system to illustrate the effects of the deposition parameters on the geometrical accuracy and dimension of the deposited chocolates. The results revealed that process parameters such as extrusion rate, nozzle velocity and nozzle height are critical for successful deposition of chocolate and the optimisation of these parameters enables the ChocALM system to create 3D chocolates with appropriate quality.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Parametric appraisal of mechanical property of fused deposition modelling processed parts
Sood, A. K., Ohdar, R. K., & Mahapatra, S. S. (2010) · Materials & Design · doi:10.1016/j.matdes.2009.06.016 · Cited by 1,318
Modeling of Bond Formation Between Polymer Filaments in the Fused Deposition Modeling Process
Bellehumeur, C., Li, L., Sun, Q., & Gu, P. (2004) · Journal of Manufacturing Processes · doi:10.1016/s1526-6125(04)70071-7 · Cited by 768
Critical parameters influencing the quality of prototypes in fused deposition modelling
Anitha, R., Arunachalam, S., & Radhakrishnan, P. (2001) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(01)00980-3 · Cited by 733
Rapid Manufacturing: An Industrial Revolution for the Digital Age
(2005) · Wiley eBooks · doi:10.1002/0470033991 · Cited by 679
Beckett, S. T. (2008) · Royal Society of Chemistry eBooks · doi:10.1039/9781847558053 · Cited by 432
Experimental study aiming to enhance the surface finish of fused deposition modeled parts
Galantucci, L. M., Lavecchia, F., & Percoco, G. (2009) · CIRP Annals · doi:10.1016/j.cirp.2009.03.071 · Cited by 404
Biopolymer deposition for freeform fabrication of hydrogel tissue constructs
Khalil, S., & Sun, W. (2007) · Materials Science and Engineering: C · doi:10.1016/j.msec.2006.05.023 · Cited by 235
Rheological and extrusion behavior of dental porcelain slurries for rapid prototyping applications
Wang, J., & Shaw, L. L. (2005) · Materials Science and Engineering A · doi:10.1016/j.msea.2005.02.045 · Cited by 82
Semi-Solid Processing of Chocolate and Cocoa Butter
Engmann, J., & Mackley, M. R. (2006) · Food and Bioproducts Processing · doi:10.1205/fbp.05103 · Cited by 25
Cited by
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
3d printing technologies applied for food design: Status and prospects
Godoi, F. C., Prakash, S., & Bhandari, B. R. (2016) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2016.01.025 · Cited by 939
3D printing: Printing precision and application in food sector
Liu, Z., Zhang, M., Bhandari, B., & Wang, Y. (2017) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2017.08.018 · Cited by 858
Additive manufacturing: A framework for implementation
Mellor, S., Hao, L., & Zhang, D. (2014) · International Journal of Production Economics · doi:10.1016/j.ijpe.2013.07.008 · Cited by 777
Self-citationImpact of rheological properties of mashed potatoes on 3D printing
Liu, Z., Zhang, M., Bhandari, B., & Yang, C. (2018) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2017.04.017 · Cited by 550
Metadata
- Authors
- Hao, L., Mellor, S., Seaman, O., Henderson, J., Sewell, N., & Sloan, M.
- Venue
- Virtual and Physical Prototyping
- Publisher
- Informa UK Limited
- Published
- 2010-06
- Volume
- 5
- Issue
- 2
- Pages
- 57-64
- ISSN
- 1745-2759 (ISSN-L)
- 1745-2767
- OpenAlex
- W1980015531
- Cited by
- 252
- References
- 9
- FWCI
- 3.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Material characterisation and process development for chocolate additive layer manufacturing. https://app.cochat.ai/papers/10.1080/17452751003753212
- The paper
- Hao, L., Mellor, S., Seaman, O., Henderson, J., Sewell, N., & Sloan, M. (2010). Material characterisation and process development for chocolate additive layer manufacturing. Virtual and Physical Prototyping. https://doi.org/10.1080/17452751003753212
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.