The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Mechanical property and structure of alkali-activated fly ash and slag blends
Abstract
Mechanical property and structure of alkali-activated fly ash (FA)/ground granulated blast furnace slag (GGBFS) blends were investigated via compressive strength testing, X-ray diffractometry (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy/energy dispersive spectroscopy. It is shown that the incorporation of slag into solid precursors can improve compressive strength of the geopolymer binders and the optimal slag content ratio which will result in the highest strength is 0.8. GGBFS is relatively more reactive than FA in alkaline activation. The binder is predominantly a class of Al-substituted sodium calcium silicate hydrate (N-C-A-S-H) gel phase, which distributes around the solid particles homogeneously. Combining the results obtained from the glass diffraction maximum of XRD and the wavenumber of T-O-Si bands displayed in FTIR, it suggests that the degree of polymerization of geopolymer binders decreases and increases. This means that the microstructure of the binder is more complex. The microstructure and chemical composition of the binders are between those of aluminosilicate gel formed in silicate-activated FA and those of calcium silicate hydrate gel formed in silicate-activated GGBFS. The major reasons contributing to this structure are the numerous calcium cations which will lead to a depolymerisation influence on the network, and/or the majority of linear chains of Si-O-Si supplied by GGBFS.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
McLellan, B. C., Williams, R. P., Lay, J., van Riessen, A., & Corder, G. D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.02.010 · Cited by 1,949
Puertas, F., Fernández-Jiménez, A., & Blanco-Varela, M. T. (2004) · Cement and Concrete Research · doi:10.1016/s0008-8846(03)00254-0 · Cited by 409
Rickard, W. D. A., Williams, R., Temuujin, J., & van Riessen, A. (2011) · Materials Science and Engineering A · doi:10.1016/j.msea.2011.01.005 · Cited by 243
Cited by
Ismail, I., Bernal, S. A., Provis, J. L., San Nicolas, R., Hamdan, S., & van Deventer, J. S. J. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2013.09.006 · Cited by 1,317
Fly ash-based geopolymer: clean production, properties and applications
Zhuang, X. Y., Chen, L., Komarneni, S., Zhou, C. H., Tong, D. S., Yang, H. M., Yu, W. H., & Wang, H. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.03.019 · Cited by 1,020
Self-citationProgressive utilisation prospects of coal fly ash: A review
Gollakota, A. R. K., Volli, V., & Shu, C.-M. (2019) · Science of The Total Environment · doi:10.1016/j.scitotenv.2019.03.337 · Cited by 548
Fly ash-based geopolymers: The relationship between composition, pore structure and efflorescence
Zhang, Z., Provis, J. L., Reid, A., & Wang, H. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.06.004 · Cited by 527
Self-citationYang, T., Zhu, H., Zhang, Z., Gao, X., Zhang, C., & Wu, Q. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.04.008 · Cited by 399
Self-citation
Metadata
- Authors
- Yang, T., Yao, X., Zhang, Z., & Wang, H.
- Venue
- Journal of Sustainable Cement-Based Materials
- Publisher
- Informa UK Limited
- Published
- 2012-12
- Volume
- 1
- Issue
- 4
- Pages
- 167-178
- ISSN
- 2165-0373 (ISSN-L)
- 2165-0381
- OpenAlex
- W2170624898
- Cited by
- 178
- References
- 3
- FWCI
- 14.10
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mechanical property and structure of alkali-activated fly ash and slag blends. https://app.cochat.ai/papers/10.1080/21650373.2012.752621
- The paper
- Yang, T., Yao, X., Zhang, Z., & Wang, H. (2012). Mechanical property and structure of alkali-activated fly ash and slag blends. Journal of Sustainable Cement-Based Materials. https://doi.org/10.1080/21650373.2012.752621
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.