Research and Progress in Laser Welding of Wrought Aluminum Alloys. II. Metallurgical Microstructures, Defects, and Mechanical Properties
The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
With the wide application of aluminum alloys in automotive, aerospace, and other industries, laser welding has become a critical joining technique for aluminum alloys. In this review, the research and progress in laser welding of wrought aluminum alloys are critically discussed from different perspectives. The primary objective of the review is to understand the influence of welding processes on joint quality and to build up the science base of laser welding for the reliable production of aluminum alloy joints. Two main types of industrial lasers, carbon dioxide (CO2), and neodymium-doped yttrium aluminum garnet (Nd:YAG), are currently applied but special attention is paid to Nd:YAG laser welding of 5000 and 6000 series alloys in the keyhole (deep penetration) mode. In the preceding article of this review (part I), the laser welding processing parameters, including the laser-, process-, and material-related variables and their effects on welding quality, have been examined. In this part of the review, the metallurgical microstructures and main defects encountered in laser welding of aluminum alloys such as porosity, cracking, oxide inclusions, and loss of alloying elements are discussed from the point of view of mechanism of their formation, main influencing factors, and remedy measures. The main mechanical properties such as hardness, tensile and fatigue strength, and formability are also evaluated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Schubert, E., Klassen, M., Zerner, I., Walz, C., & Sepold, G. (2001) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(01)00756-7 · Cited by 536 · cited 2×
“Behler et al.[92] investigated the fatigue properties of laser butt–welded Al–Mg0.”
BackgroundCurrent issues and problems in laser welding of automotive aluminium alloys
Zhao, H., White, D. R., & DebRoy, T. (1999) · International Materials Reviews · doi:10.1179/095066099101528298 · Cited by 352
Weld metal composition change during conduction mode laser welding of aluminum alloy 5182
Zhao, H., & Debroy, T. (2001) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-001-0018-6 · Cited by 204 · cited 1×
“[76] Selective vaporization of alloying elements can take place in both keyhole- and conduction-mode laser welding.”
BackgroundMechanism of alloying element vaporization during laser welding
Collur, M. M., Paul, A. J., & DebRoy, T. (1987) · Metallurgical Transactions B · doi:10.1007/bf02672891 · Cited by 127 · cited 1×
“[77] The first involves transport of vaporization elements from the bulk to the surface of the molten weld pool.”
BackgroundLaser beam welding of wrought aluminium alloys
Ion, J. C. (2000) · Science and Technology of Welding & Joining · doi:10.1179/136217100101538308 · Cited by 107
CO 2 and Nd:YAG laser beam welding of 6111-T4 aluminum alloy for automotive applications
Ramasamy, S., & Albright, C. E. (2000) · Journal of Laser Applications · doi:10.2351/1.521923 · Cited by 38 · cited 10×
“These are (1) decreasing solidification rate or welding speed,([14,15]) (2) decreasing temperature gradient in the weld pool (preheating or increasing the size of the melt pool), (3) adjusting chemical composition (higher initial solute concentration), (4) decreasing nucleation undercooling, and (5) increasing the num…”
BackgroundInfluential
Cited by
Olakanmi, E. O., Cochrane, R. F., & Dalgarno, K. W. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.03.002 · Cited by 1,742
Zhang, J., Song, B., Wei, Q., Bourell, D., & Shi, Y. (2019) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2018.09.004 · Cited by 1,205
Chowdhury, S., Yadaiah, N., Prakash, C., Ramakrishna, S., Dixit, S., Gupta, L. R., & Buddhi, D. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.07.121 · Cited by 784
Yu, W. H., Sing, S. L., Chua, C. K., Kuo, C. N., & Tian, X. L. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.04.006 · Cited by 586
Defects and anomalies in powder bed fusion metal additive manufacturing
Mostafaei, A., Zhao, C., He, Y., Reza Ghiaasiaan, S., Shi, B., Shao, S., Shamsaei, N., Wu, Z., Kouraytem, N., Sun, T., et al. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2021.100974 · Cited by 491
Metadata
- Authors
- Cao, X., Wallace, W., Immarigeon, J.-P., & Poon, C.
- Venue
- Materials and Manufacturing Processes
- Publisher
- Informa UK Limited
- Published
- 2003-01-03
- Volume
- 18
- Issue
- 1
- Pages
- 23-49
- ISSN
- 1042-6914 (ISSN-L)
- 1532-2475
- OpenAlex
- W2030164489
- Cited by
- 164
- References
- 6
- FWCI
- 2.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.