Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 181

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Experimental Study of the Grain‐Flow, Fluid‐Mud Transition in Debris Flows

Parsons, Jeffrey D., Whipple, Kelin X., Simoni, Alessandro·2001·The Journal of Geology

Abstract

We have performed a series of laboratory experiments that clarify the nature of the transition between fluid‐mud and grain‐flow behavior. The surface velocity structure and the speed of the nose of debris flows in channels with semicircular cross sections were measured with several cameras and visual tracers, while the mass flow rate was recorded using a load cell at the exit chamber. Other rheological tests were used to calculate independently the yield strength and matrix viscosity of the debris‐flow mixture. Shear rates were varied by nearly an order of magnitude for each mixture by changing the channel radius and slope. Shear rates were significantly higher than expected (6–55 s−1), given the modest slopes examined (10.7°–15.2°). The large values were primarily a result of the concentration of shear into narrow bands between a central nondeforming plug and the sidewall. As a result, the shear rate of interest was calculated by using the width of the shear band and the plug velocity, as opposed to the flow depth and front velocity. The slurries exhibited predominantly fluid‐mud behavior with finite yield strength and shear‐thinning rheologies in the debris‐flow body, while frictional behavior was often observed at the front, or snout. The addition of sand or small amounts of clay tended to make the body of the flows behave in a more Bingham‐like fashion (i.e., closer to a linear viscous flow for shear stresses exceeding the yield stress). The addition of sand also tended to accentuate the frictional behavior at the snout. Transition to frictional grain‐flow behavior occurred first at the front, for body friction numbers on the order of 100. Similar behavior has been observed in an allied field site in the Italian Alps. In the experiments, it was hypothesized that the snout‐grain‐flow transition was a result of concentration of the coarsest material at the flow front, reduced shear near the snout, and loss of matrix from the snout to the bed. Regardless of the frictional effects at the snout, flow resistance in the body was nearly always regulated by yield‐stress and shear‐thinning properties, with no discernible boundary slip, despite volumetric sand contents in excess of 50%.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1086/320798

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 1 references

Cited by

See all 181

Metadata

Authors
Parsons, J. D., Whipple, K. X., & Simoni, A.
Venue
The Journal of Geology
Published
2001-07
Volume
109
Issue
4
Pages
427-447
ISSN
  • 0022-1376 (ISSN-L)
  • 1537-5269
OpenAlex
W2078194355
Cited by
181
References
1
FWCI
19.94
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Experimental Study of the Grain‐Flow, Fluid‐Mud Transition in Debris Flows. https://app.cochat.ai/papers/10.1086/320798
The paper
Parsons, J. D., Whipple, K. X., & Simoni, A. (2001). Experimental Study of the Grain‐Flow, Fluid‐Mud Transition in Debris Flows. The Journal of Geology. https://doi.org/10.1086/320798

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.