The DOI matches its Crossref record.
Determination of Sieve-Size Distribution from Thin-Section Data for Sedimentary Petrological Studies
Abstract
The sieving methods presently in use for loosely consolidated rocks are inadequate for the determination of grain-size distribution in cemented and indurated sedimentary rocks. Thin-section study represents an alternative method of obtaining the particle size distribution for such rocks. The purpose of this study is to establish a correlation between sieve and thin-section grain-size analyses. Grain-size analyses were made on thirty-eight rock samples by both sieving and thin-section methods. The cumulative frequency curve determined from the apparent long diameter measured in thin-section lies toward the coarser size range with respect to the sieve-size distribution curve, but the discrepancy between the cumulative frequency curves for the two techniques is small. A plot of thin-section quartile parameters against sieving quartile parameters indicates a linear correlation between the two techniques. For all practical purposes, the same linear function expresses the relationship between quartile parameters as determined by the two methods, so that all three quartile measures (Ql, Md, Q3) can be combined into one plot. A graph based on 114 quartile measures for sieve and thin-section analyses forms the basis for the derivation of sieve-size dis tribution from thin-section data. A new graph paper has been developed which permits the construction of a cumulative frequency curve for sieving from thin-section data without mathematical conversions. Moreover, the graph paper allows the direct determination of sieving parameters. The usefulness of the new method is illustrated by comparing it with conversion techniques developed from mathematical analysis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A REVIEW OF GRAIN‐SIZE PARAMETERS
FOLK, R. L. (1966) · Sedimentology · doi:10.1111/j.1365-3091.1966.tb01572.x · Cited by 905
Detrital sedimentary rock classification and nomenclature for use in New Zealand
Folk, R. L., Andrews, P. B., & Lewis, D. W. (1970) · New Zealand Journal of Geology and Geophysics · doi:10.1080/00288306.1970.10418211 · Cited by 820
Quantitative Textural Measurements in Igneous and Metamorphic Petrology
Higgins, M. D. (2006) · Cambridge University Press eBooks · doi:10.1017/cbo9780511535574 · Cited by 371
Eolianite Grain Size Distributions as a Proxy for Large Changes in Planetary Atmospheric Density
Goosmann, E. A., Catling, D. C., Som, S. M., Altermann, W., & Buick, R. (2018) · Journal of Geophysical Research: Planets · doi:10.1029/2018je005723 · Cited by 18
“Sedimentologists counteract this bias by measuring the long axis of grains, and others sometimes use empirically based conversion equations (Friedman, 1958; Harrell & Eriksson, 1979) that have been met with skepticism (Johnson, 1994).”
Background
Metadata
- Authors
- Friedman, G. M.
- Venue
- The Journal of Geology
- Publisher
- University of Chicago Press
- Published
- 1958-07
- Volume
- 66
- Issue
- 4
- Pages
- 394-416
- ISSN
- 0022-1376 (ISSN-L)
- 1537-5269
- OpenAlex
- W2048344293
- Cited by
- 175
- References
- 0
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.