The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
The grand challenges of plasma etching: a manufacturing perspective
Abstract
Plasma etching has been enabling nano-electronic fabrication since the 1980s; during this time, transistor size has shrunk by nearly two orders of magnitude, starting at 1.0 µ m in the mid 80s to ∼0.01 µ m today. The manufacturing of these devices requires overcoming a series of challenges, ranging from continuous innovation on device integration to extend Moore's law to breaking tradeoffs on the perennial challenge of aspect ratio-dependent etching. In this paper, we will review four key areas in etch manufacturing: uniformity, defects, surface precision and ‘sticky’/non-volatile etch materials. In the uniformity section, we will discuss the challenges for microscopic uniformity, such as localized feature dimension variations; macroscopic uniformity, such as performance at the extreme edge of the wafer; and repeatable uniformity, meaning wafer-to-wafer, lot-to-lot and chamber-to-chamber performance. While defect management is successful with in situ plasma cleans, one must be cognizant of the choice of clean chemistry. In surface precision, we look at the approach of atomic layer etching and how it can be successful in a manufacturing environment. Finally, in the non-volatile material section, we review technology drivers for DRAM (dynamic random access memory) and NAND flash memory in the microelectronics Si industry, with focus on the utilization of such materials and what it means to etch equipment manufacturers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Principles of Plasma Discharges and Materials Processing
Lieberman, M. A., & Lichtenberg, A. J. (2005) · doi:10.1002/0471724254 · Cited by 4,748
Cited by
The 2017 Plasma Roadmap: Low temperature plasma science and technology
Adamovich, I., Baalrud, S. D., Bogaerts, A., Bruggeman, P. J., Cappelli, M., Colombo, V, Czarnetzki, U., Ebert, U., Eden, J. G., Favia, P., et al. (2017) · Journal of Physics D: Applied Physics · doi:10.1088/1361-6463/aa76f5 · Cited by 967
Overview of atomic layer etching in the semiconductor industry
Kanarik, K. J., Lill, T., Hudson, E. A., Sriraman, S., Tan, S., Marks, J., Vahedi, V., & Gottscho, R. A. (2015) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.4913379 · Cited by 623
Self-citationAtomic Layer Etching at the Tipping Point: An Overview
Oehrlein, G. S., Metzler, D., & Li, C. (2015) · ECS Journal of Solid State Science and Technology · doi:10.1149/2.0061506jss · Cited by 295
Metadata
- Authors
- Lee, C. G. N., Kanarik, K. J., & Gottscho, R. A.
- Venue
- Journal of Physics D: Applied Physics
- Publisher
- IOP Publishing
- Published
- 2014-06-18
- Volume
- 47
- Issue
- 27
- Pages
- 273001
- ISSN
- 0022-3727 (ISSN-L)
- 1361-6463
- OpenAlex
- W2080170858
- Cited by
- 182
- References
- 1
- FWCI
- 4.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The grand challenges of plasma etching: a manufacturing perspective. https://app.cochat.ai/papers/10.1088/0022-3727/47/27/273001
- The paper
- Lee, C. G. N., Kanarik, K. J., & Gottscho, R. A. (2014). The grand challenges of plasma etching: a manufacturing perspective. Journal of Physics D: Applied Physics. https://doi.org/10.1088/0022-3727/47/27/273001
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.