The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Impurity seeding for tokamak power exhaust: from present devices via ITER to DEMO
Open accessAbstract
A future fusion reactor is expected to have all-metal plasma facing materials (PFMs) to ensure low erosion rates, low tritium retention and stability against high neutron fluences. As a consequence, intrinsic radiation losses in the plasma edge and divertor are low in comparison to devices with carbon PFMs. To avoid localized overheating in the divertor, intrinsic low- Z and medium- Z impurities have to be inserted into the plasma to convert a major part of the power flux into radiation and to facilitate partial divertor detachment. For burning plasma conditions in ITER, which operates not far above the L–H threshold power, a high divertor radiation level will be mandatory to avoid thermal overload of divertor components. Moreover, in a prototype reactor, DEMO, a high main plasma radiation level will be required in addition for dissipation of the much higher alpha heating power. For divertor plasma conditions in present day tokamaks and in ITER, nitrogen appears most suitable regarding its radiative characteristics. If elevated main chamber radiation is desired as well, argon is the best candidate for the simultaneous enhancement of core and divertor radiation, provided sufficient divertor compression can be obtained. The parameter P sep / R , the power flux through the separatrix normalized by the major radius, is suggested as a suitable scaling (for a given electron density) for the extrapolation of present day divertor conditions to larger devices. The scaling for main chamber radiation from small to large devices has a higher, more favourable dependence of about P rad,main / R 2 . Krypton provides the smallest fuel dilution for DEMO conditions, but has a more centrally peaked radiation profile compared to argon. For investigation of the different effects of main chamber and divertor radiation and for optimization of their distribution, a double radiative feedback system has been implemented in ASDEX Upgrade (AUG). About half the ITER/DEMO values of P sep / R have been achieved so far, and close to DEMO values of P rad,main / R 2 , albeit at lower P sep / R . Further increase of this parameter may be achieved by increasing the neutral pressure or improving the divertor geometry.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Plasma Boundary of Magnetic Fusion Devices
Stangeby, P. C. (2000) · Institute of Physics eBooks · doi:10.1887/0750305592 · Cited by 1,390
Divertor power load feedback with nitrogen seeding in ASDEX Upgrade
Kallenbach, A., Dux, R., Fuchs, C., Fischer, R. D., Geiger, B., Giannone, L., Herrmann, A., Lunt, T., Mertens, V., McDermott, R. M., et al. (2010) · Plasma Physics and Controlled Fusion · doi:10.1088/0741-3335/52/5/055002 · Cited by 199
Self-citationPlasma surface interactions in impurity seeded plasmas
Kallenbach, A., Balden, M., Dux, R., Eich, T. H., Giroud, C., Huber, A., Maddison, G. P., Mayer, M., McCormick, K., Neu, R., et al. (2010) · Journal of Nuclear Materials · doi:10.1016/j.jnucmat.2010.11.105 · Cited by 145
Self-citationOptimized tokamak power exhaust with double radiative feedback in ASDEX Upgrade
Kallenbach, A., Bernert, M., Eich, T. H., Fuchs, C., Giannone, L., Herrmann, A., Schweinzer, J., & Treutterer, W. (2012) · Nuclear Fusion · doi:10.1088/0029-5515/52/12/122003 · Cited by 123
Self-citationThe effect of a metal wall on confinement in JET and ASDEX Upgrade
Beurskens, M., Schweinzer, J., Angioni, C., et al. (2013) · Plasma Physics and Controlled Fusion · doi:10.1088/0741-3335/55/12/124043 · Cited by 102
Self-citation
Cited by
Overview of EU DEMO design and R&D activities
Federici, G., Kemp, R., Ward, D., Bachmann, C., Franke, T., Gonzalez, S., Lowry, C., Gadomska, M., Harman, J., Meszaros, B., et al. (2014) · Fusion Engineering and Design · doi:10.1016/j.fusengdes.2014.01.070 · Cited by 321
Self-citationPark, R. M., Kupets, W., Zammit, M. C., Colgan, J., Fontes, C. J., Scheiner, B. S., Timmermans, E., Tang, X.-Z., Scarlett, L. H., Fursa, D. V., et al. (2022) · Plasma Sources Science and Technology · doi:10.1088/1361-6595/ac781f · Cited by 6
Metadata
- Authors
- Kallenbach, A., Bernert, M., Dux, R., Casali, L., Eich, T., Giannone, L., Herrmann, A., McDermott, R., Mlynek, A., Müller, H. W., Reimold, F., Schweinzer, J., Sertoli, M., Tardini, G., Treutterer, W., Viezzer, E., Wenninger, R., Wischmeier, M., & the ASDEX Upgrade Team
- Venue
- Plasma Physics and Controlled Fusion
- Publisher
- IOP Publishing
- Published
- 2013-11-28
- Volume
- 55
- Issue
- 12
- Pages
- 124041
- ISSN
- 0741-3335 (ISSN-L)
- 1361-6587
- OpenAlex
- W1994226899
- Cited by
- 402
- References
- 5
- FWCI
- 9.13
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Impurity seeding for tokamak power exhaust: from present devices via ITER to DEMO. https://app.cochat.ai/papers/10.1088/0741-3335/55/12/124041
- The paper
- Kallenbach, A., Bernert, M., Dux, R., Casali, L., Eich, T., Giannone, L., Herrmann, A., McDermott, R., Mlynek, A., Müller, H. W., Reimold, F., Schweinzer, J., Sertoli, M., Tardini, G., Treutterer, W., Viezzer, E., Wenninger, R., Wischmeier, M., & the ASDEX Upgrade Team. (2013). Impurity seeding for tokamak power exhaust: from present devices via ITER to DEMO. Plasma Physics and Controlled Fusion. https://doi.org/10.1088/0741-3335/55/12/124041
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.