The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Superconductor bearings, flywheels and transportation
Open accessAbstract
This paper describes the present status of high temperature superconductors (HTS) and of bulk superconducting magnet devices, their use in bearings, in flywheel energy storage systems (FESS) and linear transport magnetic levitation (Maglev) systems. We report and review the concepts of multi-seeded REBCO bulk superconductor fabrication. The multi-grain bulks increase the averaged trapped magnetic flux density up to 40% compared to single-grain assembly in large-scale applications. HTS magnetic bearings with permanent magnet (PM) excitation were studied and scaled up to maximum forces of 10 kN axially and 4.5 kN radially. We examine the technology of the high-gradient magnetic bearing concept and verify it experimentally. A large HTS bearing is tested for stabilizing a 600 kg rotor of a 5 kWh/250 kW flywheel system. The flywheel rotor tests show the requirement for additional damping. Our compact flywheel system is compared with similar HTS–FESS projects. A small-scale compact YBCO bearing with in situ Stirling cryocooler is constructed and investigated for mobile applications. Next we show a successfully developed modular linear Maglev system for magnetic train operation. Each module levitates 0.25 t at 10 mm distance during one-day operation without refilling LN 2 . More than 30 vacuum cryostats containing multi-seeded YBCO blocks are fabricated and are tested now in Germany, China and Brazil.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
High-temperature superconductor bulk magnets that can trap magnetic fields of over 17 tesla at 29 K
Tomita, M., & Murakami, M. (2003) · Nature · doi:10.1038/nature01350 · Cited by 954
Vertical and lateral forces between a permanent magnet and a high-temperature superconductor
Hull, J. R., & Cansız, A. (1999) · Journal of Applied Physics · doi:10.1063/1.371703 · Cited by 287
Application of permanent magnets in accelerators and electron storage rings (invited)
Halbach, K. (1985) · Journal of Applied Physics · doi:10.1063/1.335021 · Cited by 222
An overview of Boeing flywheel energy storage systems with high-temperature superconducting bearings
Strasik, M., Hull, J. R., Mittleider, J. A., Gonder, J. F., Johnson, P. E., McCrary, K. E., & McIver, C. R. (2010) · Superconductor Science and Technology · doi:10.1088/0953-2048/23/3/034021 · Cited by 194
Strasik, M., Johnson, P. E., Day, A. C., Mittleider, J. A., Higgins, M., Edwards, J., Schindler, J., McCrary, K. E., McIver, C. R., Carlson, D. L., et al. (2007) · IEEE Transactions on Applied Superconductivity · doi:10.1109/tasc.2007.898065 · Cited by 123
Progress of superconducting bearing technologies for flywheel energy storage systems
Koshizuka, N., Ishikawa, F., Hidetoshi, N. A. S. U., Murakami, M., Matsunaga, K., SAITO, S., Saitô, O., Nakamura, Y., Yamamoto, H., TAKAHATA, R., et al. (2003) · Physica C Superconductivity · doi:10.1016/s0921-4534(02)02206-2 · Cited by 104
Cited by
Arani, A. A. K., Karami, H., Gharehpetian, G. B., & Hejazi, M. S. A. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.11.166 · Cited by 399
Critical Review of Flywheel Energy Storage System
Olabi, A. G., Wilberforce, T., Abdelkareem, M. A., & Ramadan, M. (2021) · Energies · doi:10.3390/en14082159 · Cited by 215
Metadata
- Authors
- Werfel, F. N., Floegel-Delor, U., Rothfeld, R., Riedel, T., Goebel, B., Wippich, D., & Schirrmeister, P.
- Venue
- Superconductor Science and Technology
- Publisher
- IOP Publishing
- Published
- 2011-12-01
- Volume
- 25
- Issue
- 1
- Pages
- 014007
- ISSN
- 0953-2048 (ISSN-L)
- 1361-6668
- OpenAlex
- W2108929507
- Cited by
- 478
- References
- 6
- FWCI
- 11.12
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Superconductor bearings, flywheels and transportation. https://app.cochat.ai/papers/10.1088/0953-2048/25/1/014007
- The paper
- Werfel, F. N., Floegel-Delor, U., Rothfeld, R., Riedel, T., Goebel, B., Wippich, D., & Schirrmeister, P. (2012). Superconductor bearings, flywheels and transportation. Superconductor Science and Technology. https://doi.org/10.1088/0953-2048/25/1/014007
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.