The DOI matches its Crossref record.
Relaxor-ferroelectric superlattices: high energy density capacitors
Open accessAbstract
We report the breakdown electric field and energy density of laser ablated BaTiO(3)/Ba((1-x))Sr(x)TiO(3) (x = 0.7) (BT/BST) relaxor-ferroelectric superlattices (SLs) grown on (100) MgO single crystal substrates. The dielectric constant shows a frequency dispersion below the dielectric maximum temperature (T(m)) with a merger above T(m) behaving similarly to relaxors. It also follows the basic criteria of relaxor ferroelectrics such as low dielectric loss over wide temperature and frequency, and 50 K shift in T(m) with change in probe frequency; the loss peaks follow a similar trend to the dielectric constant except that they increase with increase in frequency (~40 kHz), and satisfy the nonlinear Vogel-Fulcher relation. Well-saturated ferroelectric hysteresis and 50-80% dielectric saturation are observed under high electric field (~1.65 MV cm(-1)). The superlattices demonstrate an 'in-built' field in as grown samples at low probe frequency (<1 kHz), whereas it becomes more symmetric and centered with increase in the probe frequency system (>1 kHz) which rules out the effect of any space charge and interfacial polarization. The P-E loops show around 12.24 J cm(-3) energy density within the experimental limit, but extrapolation of this data suggests that the potential energy density could reach 46 J cm(-3). The current density versus applied electric field indicates an exceptionally high breakdown field (5.8-6.0 MV cm(-1)) and low current density (~10-25 mA cm(-2)) near the breakdown voltage. The current-voltage characteristics reveal that the space charge limited conduction mechanism prevails at very high voltage.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Homogeneous/Inhomogeneous‐Structured Dielectrics and their Energy‐Storage Performances
Yao, Z., Song, Z., Hao, H., Yu, Z., Cao, M., Zhang, S., Lanagan, M. T., & Liu, H. (2017) · Advanced Materials · doi:10.1002/adma.201601727 · Cited by 1,231
Pandey, R., Vats, G., Yun, J., Bowen, C. R., Ho‐Baillie, A. W. Y., Seidel, J., Butler, K. T., & Seok, S. I. (2019) · Advanced Materials · doi:10.1002/adma.201807376 · Cited by 1,069
High‐Performance Dielectric Ceramic Films for Energy Storage Capacitors: Progress and Outlook
Palneedi, H., Peddigari, M., Hwang, G., Jeong, D., & Ryu, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201803665 · Cited by 1,066
A review on the dielectric materials for high energy-storage application
Hao, X. (2013) · Journal of Advanced Dielectrics · doi:10.1142/s2010135x13300016 · Cited by 1,011
Zhou, M., Liang, R., Zhou, Z., & Dong, X. (2018) · Journal of Materials Chemistry C · doi:10.1039/c8tc03003k · Cited by 535
Metadata
- Authors
- Ortega, N., Kumar, A., Scott, J. F., Chrisey, D. B., Tomazawa, M., Kumari, S., Diestra, D. G. B., & Katiyar, R. S.
- Venue
- Journal of Physics: Condensed Matter
- Publisher
- IOP Publishing
- Published
- 2012-10-10
- Volume
- 24
- Issue
- 44
- Pages
- 445901
- ISSN
- 0953-8984 (ISSN-L)
- 1361-648X
- OpenAlex
- W1964464448
- Cited by
- 162
- References
- 0
- FWCI
- 4.78
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Relaxor-ferroelectric superlattices: high energy density capacitors. https://app.cochat.ai/papers/10.1088/0953-8984/24/44/445901
- The paper
- Ortega, N., Kumar, A., Scott, J. F., Chrisey, D. B., Tomazawa, M., Kumari, S., Diestra, D. G. B., & Katiyar, R. S. (2012). Relaxor-ferroelectric superlattices: high energy density capacitors. Journal of Physics: Condensed Matter. https://doi.org/10.1088/0953-8984/24/44/445901
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.