The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Fluid modelling of a packed bed dielectric barrier discharge plasma reactor
Abstract
Abstract A packed bed dielectric barrier discharge plasma reactor is computationally studied with a fluid model. Two different complementary axisymmetric 2D geometries are used to mimic the intrinsic 3D problem. It is found that a packing enhances the electric field strength and electron temperature at the contact points of the dielectric material due to polarization of the beads by the applied potential. As a result, these contact points prove to be of direct importance to initiate the plasma. At low applied potential, the discharge stays at the contact points, and shows the properties of a Townsend discharge. When a high enough potential is applied, the plasma will be able to travel through the gaps in between the beads from wall to wall, forming a kind of glow discharge. Therefore, the inclusion of a so-called ‘channel of voids’ is indispensable in any type of packed bed modelling.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hagelaar, G. J. M., & Pitchford, L. C. (2005) · Plasma Sources Science and Technology · doi:10.1088/0963-0252/14/4/011 · Cited by 3,422
Cited by
Plasma technology – a novel solution for CO2 conversion?
Snoeckx, R., & Bogaerts, A. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00066e · Cited by 1,268
Self-citationBrandenburg, R. (2017) · Plasma Sources Science and Technology · doi:10.1088/1361-6595/aa6426 · Cited by 802
Plasma Technology: An Emerging Technology for Energy Storage
Bogaerts, A., & Neyts, E. C. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00184 · Cited by 677
Self-citationA Review of Non-Thermal Plasma Technology: A novel solution for CO2 conversion and utilization
George, A., Shen, B., Craven, M., Wang, Y., Kang, D., Wu, C., & Tu, X. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109702 · Cited by 497
Plasma-driven catalysis: green ammonia synthesis with intermittent electricity
Rouwenhorst, K. H. R., Engelmann, Y., van ‘t Veer, K., Postma, R. S., Bogaerts, A., & Lefferts, L. (2020) · Green Chemistry · doi:10.1039/d0gc02058c · Cited by 331
Self-citation
Metadata
- Authors
- Van Laer, K., & Bogaerts, A.
- Venue
- Plasma Sources Science and Technology
- Publisher
- IOP Publishing
- Published
- 2015-12-01
- Volume
- 25
- Issue
- 1
- Pages
- 015002
- ISSN
- 0963-0252 (ISSN-L)
- 1361-6595
- OpenAlex
- W2520438267
- Cited by
- 191
- References
- 1
- FWCI
- 10.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fluid modelling of a packed bed dielectric barrier discharge plasma reactor. https://app.cochat.ai/papers/10.1088/0963-0252/25/1/015002
- The paper
- Van Laer, K., & Bogaerts, A. (2016). Fluid modelling of a packed bed dielectric barrier discharge plasma reactor. Plasma Sources Science and Technology. https://doi.org/10.1088/0963-0252/25/1/015002
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.