The DOI matches its Crossref record.
Structural health monitoring system based on diffracted Lamb wave analysis by multiresolution processing
Open accessAbstract
A health monitoring system is presented composed of integrated disc-shaped, 100 µm thick and 5 mm diameter piezoelectric transducers (PZTs) working sequentially as Lamb wave emitters and receivers. The diagnostic is based on the analysis of Lamb wave signals recorded before and after damage. In the composite, delaminations are discontinuities producing mode conversion processes generating various outgoing modes. The multiresolution processing allows the isolation of various propagation modes and their extraction in order to measure, for various propagation paths, the time delay between the arrivals of the main burst and of a specific outgoing mode. This process permits, with good accuracy, the localization of damage and the estimation of its extent. The robustness and portability of this technique is demonstrated by the fact that, after validation in our laboratory, it was successfully applied to data coming from an experiment conducted in another laboratory using its own acousto-ultrasonic health monitoring hardware system.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Guided Lamb waves for identification of damage in composite structures: A review
Su, Z., Ye, L., & Lu, Y. (2006) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2006.01.020 · Cited by 1,560
Guided wave based structural health monitoring: A review
Mitra, M., & Gopalakrishnan, S. (2016) · Smart Materials and Structures · doi:10.1088/0964-1726/25/5/053001 · Cited by 1,045
Effects of environmental and operational variability on structural health monitoring
Sohn, H. (2007) · Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rsta.2006.1935 · Cited by 883
A synthetic time-reversal imaging method for structural health monitoring
Wang, C. H., Rose, J. T., & Chang, F.-K. (2004) · Smart Materials and Structures · doi:10.1088/0964-1726/13/2/020 · Cited by 545
Michaels, J. E. (2008) · Smart Materials and Structures · doi:10.1088/0964-1726/17/3/035035 · Cited by 493
Metadata
- Authors
- Lemistre, M., & Balageas, D.
- Venue
- Smart Materials and Structures
- Publisher
- IOP Publishing
- Published
- 2001-06-01
- Volume
- 10
- Issue
- 3
- Pages
- 504-511
- ISSN
- 0964-1726 (ISSN-L)
- 1361-665X
- OpenAlex
- W2018560744
- Cited by
- 218
- References
- 0
- FWCI
- 16.92
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Structural health monitoring system based on diffracted Lamb wave analysis by multiresolution processing. https://app.cochat.ai/papers/10.1088/0964-1726/10/3/312
- The paper
- Lemistre, M., & Balageas, D. (2001). Structural health monitoring system based on diffracted Lamb wave analysis by multiresolution processing. Smart Materials and Structures. https://doi.org/10.1088/0964-1726/10/3/312
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.