The DOI matches its Crossref record.
Experimental Duffing oscillator for broadband piezoelectric energy harvesting
Open accessAbstract
This paper presents an experimental piezoelectric energy harvester exhibiting strong mechanical nonlinear behavior. Vibration energy harvesters are usually resonant mechanical systems working at resonance. The resulting mechanical amplification gives an output power multiplied by the mechanical quality factor Q when compared to non-resonant systems, provided that the electromechanical coupling k 2 is high as well as the mechanical quality factor Q . However, increasing the Q value results in a narrowband energy harvester, and the main drawback is the difficulty of matching a given vibration frequency range to the energy harvester's resonance frequency. Mechanical nonlinear stiffness results in a distortion of the resonance peak that may lead to a broadband energy harvesting capability while keeping a large output power as for high Q systems. This paper is devoted to an experimental study of a Duffing oscillator exhibiting piezoelectric electromechanical coupling. A nonlinear electromechanical model is first presented including piezoelectric coupling, a nonlinear stiffness as for a Duffing oscillator, and an additional nonlinear loss term. Under harmonic excitation, it is shown that for a particular excitation range, the power frequency bandwidth is multiplied by a factor of 5.45 whereas the output power is decreased by a factor of 2.4. In addition, when compared to a linear system exhibiting the same power bandwidth as for the nonlinear one (which is here 7.75%), the output power is increased by a factor of 16.5. Harmonic study is, however, partially irrelevant, because Duffing oscillators exhibit a frequency range where two stable harmonic solutions are possible. When excited with sine bursts or colored noise, the oscillator remains most of the time at the lowest solution. In this paper, we present a technique—called fast burst perturbation—which consists of a fast voltage burst applied to the piezoelectric element. It is then shown that the resonator may jump from the low solution to the high solution at a very small energy cost. Time-domain solution of the model is presented to support experimental data.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A review of the recent research on vibration energy harvesting via bistable systems
Harne, R. L., & Wang, K. W. (2013) · Smart Materials and Structures · doi:10.1088/0964-1726/22/2/023001 · Cited by 1,351
High-Performance Piezoelectric Energy Harvesters and Their Applications
Yang, Z., Zhou, S., Zu, J., & Inman, D. (2018) · Joule · doi:10.1016/j.joule.2018.03.011 · Cited by 1,264
Liu, H., Zhong, J., Lee, C., Lee, S.-W., & Lin, L. (2018) · Applied Physics Reviews · doi:10.1063/1.5074184 · Cited by 905
On the Role of Nonlinearities in Vibratory Energy Harvesting: A Critical Review and Discussion
Daqaq, M. F., Masana, R., Erturk, A., & Dane Quinn, D. (2014) · Applied Mechanics Reviews · doi:10.1115/1.4026278 · Cited by 823
Piezoelectric Energy Harvesting Solutions: A Review
Covaci, C., & Gontean, A. (2020) · Sensors · doi:10.3390/s20123512 · Cited by 691
Metadata
- Authors
- Sebald, G., Kuwano, H., Guyomar, D., & Ducharne, B.
- Venue
- Smart Materials and Structures
- Publisher
- IOP Publishing
- Published
- 2011-09-20
- Volume
- 20
- Issue
- 10
- Pages
- 102001
- ISSN
- 0964-1726 (ISSN-L)
- 1361-665X
- OpenAlex
- W2104039155
- Cited by
- 235
- References
- 0
- FWCI
- 19.92
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Experimental Duffing oscillator for broadband piezoelectric energy harvesting. https://app.cochat.ai/papers/10.1088/0964-1726/20/10/102001
- The paper
- Sebald, G., Kuwano, H., Guyomar, D., & Ducharne, B. (2011). Experimental Duffing oscillator for broadband piezoelectric energy harvesting. Smart Materials and Structures. https://doi.org/10.1088/0964-1726/20/10/102001
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.