The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
An analytical model for the heat generation in friction stir welding
Abstract
The objective of this work is to establish an analytical model for heat generation by friction stir welding (FSW), based on different assumptions of the contact condition between the rotating tool surface and the weld piece. The material flow and heat generation are characterized by the contact conditions at the interface, and are described as sliding, sticking or partial sliding/sticking. Different mechanisms of heat generation are behind each contact condition, making this study important for further understanding of the real FSW process. The analytical expression for the heat generation is a modification of previous analytical models known from the literature and accounts for both conical surfaces and different contact conditions. Experimental results on plunge force and torque are used to determine the contact condition. The sliding condition yields a proportional relationship between the plunge force and heat generation. This is not demonstrated in the experiment, which suggests that the sticking contact condition is present at the tool/matrix interface.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Properties of friction-stir-welded 7075 T651 aluminum
Mahoney, M. W., Rhodes, C. G., Flintoff, J. G., Bingel, W. H., & Spurling, R. A. (1998) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-998-0021-5 · Cited by 948
Thomas, W. M. (1991) · Medical Entomology and Zoology · Cited by 759
A process model for friction stir welding of age hardening aluminum alloys
Frigaard, Ø., Grong, Ø., & Midling, O. T. (2001) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-001-0128-4 · Cited by 624
Thermal modeling of friction stir welding in a moving coordinate system and its validation
Song, M., & Kovacevic, R. (2003) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(03)00022-1 · Cited by 422
Khandkar, M. Z. H., Khan, J. A., & Reynolds, A. P. (2003) · Science and Technology of Welding and Joining · doi:10.1179/136217103225010943 · Cited by 354
Mechanical response of friction stir welded AA2024: experiment and modeling
Lockwood, W. D., Tomaz, B., & Reynolds, A. P. (2002) · Materials Science and Engineering A · doi:10.1016/s0921-5093(01)01385-5 · Cited by 198
Finite element simulation of material flow in friction stir welding
Xu, S., Deng, X., Reynolds, A. P., & Seidel, T. U. (2001) · Science and Technology of Welding & Joining · doi:10.1179/136217101101538640 · Cited by 157
Processing-Property Correlation in Friction Stir Welds
Reynolds, A. P., Lockwood, W. D., & Seidel, T. U. (2000) · Materials science forum · doi:10.4028/www.scientific.net/msf.331-337.1719 · Cited by 94
Cited by
Friction stir welding and processing
Mishra, R. S., & Ma, Z. Y. (2005) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2005.07.001 · Cited by 6,753
Friction stir welding and processing
(2008) · Choice Reviews Online · doi:10.5860/choice.46-0901 · Cited by 3,862
Recent advances in friction-stir welding – Process, weldment structure and properties
NANDAN, R., DEBROY, T., & BHADESHIA, H. (2008) · Progress in Materials Science · doi:10.1016/j.pmatsci.2008.05.001 · Cited by 2,098
A review of numerical analysis of friction stir welding
He, X., Gu, F., & Ball, A. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.03.003 · Cited by 506
A local model for the thermomechanical conditions in friction stir welding
Schmidt, H., & Hattel, J. (2005) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/13/1/006 · Cited by 426
Self-citation
Metadata
- Authors
- Schmidt, H., Hattel, J., & Wert, J.
- Venue
- Modelling and Simulation in Materials Science and Engineering
- Publisher
- IOP Publishing
- Published
- 2003-11-07
- Volume
- 12
- Issue
- 1
- Pages
- 143-157
- ISSN
- 0965-0393 (ISSN-L)
- 1361-651X
- OpenAlex
- W2170097035
- Cited by
- 809
- References
- 8
- FWCI
- 34.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: An analytical model for the heat generation in friction stir welding. https://app.cochat.ai/papers/10.1088/0965-0393/12/1/013
- The paper
- Schmidt, H., Hattel, J., & Wert, J. (2004). An analytical model for the heat generation in friction stir welding. Modelling and Simulation in Materials Science and Engineering. https://doi.org/10.1088/0965-0393/12/1/013
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.