The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
Interatomic potential to study plasticity in stainless steels: the FeNiCr model alloy
Open accessAbstract
Austenitic stainless steels are commonly used materials for in-core components of nuclear light water reactors. In service, such components are exposed to harsh conditions: intense neutron irradiation, mechanical and thermal stresses, and aggressive corrosion environment which all contribute to the components' degradation. For a better understanding of the prevailing mechanisms responsible for the materials degradation, large-scale atomistic simulations are desirable. In this framework we developed an embedded atom method type interatomic potential for the ternary FeNiCr system to model movement of dislocations and their interaction with radiation defects. Special attention has been drawn to the Fe–10Ni–20Cr alloy, whose properties were ensured to be close to those of 316L austenitic stainless steel. In particular, the stacking fault energy and elastic constants are well reproduced. The fcc phase for the Fe–10Ni–20Cr random alloy was proven to be stable in the temperature range 0–900 K and under shear strain up to 5%. For the same alloy the stable glide of screw dislocations and stability of Frank loops was confirmed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Introduction to Solid State Physics
Kittel, C., & Fan, H. Y. (1957) · American Journal of Physics · doi:10.1119/1.1934457 · Cited by 22,240
Introduction to Solid State Physics
Kittel, C., & Dexter, D. L. (1953) · American Journal of Physics · doi:10.1119/1.1933590 · Cited by 13,240
Daw, M. S., & Baskes, M. I. (1984) · Physical Review B · doi:10.1103/physrevb.29.6443 · Cited by 7,263
Deformation and Fracture Mechanics of Engineering Materials
Hertzberg, R. W., & Hauser, F. E. (1977) · Journal of Engineering Materials and Technology · doi:10.1115/1.3443416 · Cited by 3,668
A simple empirical N-body potential for transition metals
Finnis, M. W., & Sinclair, J. E. (1984) · Philosophical Magazine A · doi:10.1080/01418618408244210 · Cited by 3,159
Single Crystal Elastic Constants and Calculated Aggregate Properties. A Handbook
Simmons, G., & Wang, H. F. (1971) · Medical Entomology and Zoology · Cited by 2,644
Interfacial phenomena in metals and alloys
(1978) · Materials Chemistry · doi:10.1016/0390-6035(78)90059-7 · Cited by 1,553
Universal features of the equation of state of metals
Rose, J. H., Smith, J. R., Guinea, F., & Ferrante, J. (1984) · Physical Review B · doi:10.1103/physrevb.29.2963 · Cited by 1,466
Deformation and fracture mechanics of engineering materials
(1977) · International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts · doi:10.1016/0148-9062(77)91139-1 · Cited by 712
Crystallography and crystal defects
(2012) · Choice Reviews Online · doi:10.5860/choice.49-6893 · Cited by 676
Cited by
High entropy alloys: A focused review of mechanical properties and deformation mechanisms
George, E. P., Curtin, W. A., & Tasan, C. C. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.12.015 · Cited by 1,917
Theory of strengthening in fcc high entropy alloys
Varvenne, C., Luque, A., & Curtin, W. A. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.040 · Cited by 908
Radiation-induced segregation on defect clusters in single-phase concentrated solid-solution alloys
Lu, C., Yang, T., Jin, K., Gao, N., Xiu, P., Zhang, Y., Gao, F., Bei, H., Weber, W. J., Sun, K., et al. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.01.019 · Cited by 316
Zhao, S., Stocks, G. M., & Zhang, Y. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp05161h · Cited by 206
Metadata
- Authors
- Bonny, G., Terentyev, D., Pasianot, R. C., Poncé, S., & Bakaev, A.
- Venue
- Modelling and Simulation in Materials Science and Engineering
- Publisher
- IOP Publishing
- Published
- 2011-11-03
- Volume
- 19
- Issue
- 8
- Pages
- 085008
- ISSN
- 0965-0393 (ISSN-L)
- 1361-651X
- OpenAlex
- W2037654616
- Cited by
- 272
- References
- 17
- FWCI
- 1.86
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Interatomic potential to study plasticity in stainless steels: the FeNiCr model alloy. https://app.cochat.ai/papers/10.1088/0965-0393/19/8/085008
- The paper
- Bonny, G., Terentyev, D., Pasianot, R. C., Poncé, S., & Bakaev, A. (2011). Interatomic potential to study plasticity in stainless steels: the FeNiCr model alloy. Modelling and Simulation in Materials Science and Engineering. https://doi.org/10.1088/0965-0393/19/8/085008
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
