An overview of laser-based multiple metallic material additive manufacturing: from macro- to micro-scales
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Additive manufacturing (AM) is an emerging customized three-dimensional (3D) functional product fabrication technology. It provides a higher degree of design freedom, reduces manufacturing steps, cost and production cycles. However, existing metallic component 3D printing techniques are mainly for the manufacture of single material components. With the increasing commercial applications of AM technologies, the need for 3D printing of more than one type of dissimilar materials in a single component increases. Therefore, investigations on multi-material AM (MMAM) emerge over the past decade. Lasers are currently widely used for the AM of metallic components where high temperatures are involved. Here we report the progress and trend in laser-based macro- and micro-scale AM of multiple metallic components. The methods covered in this paper include laser powder bed fusion, laser powder directed energy deposition, and laser-induced forward transfer for MMAM applications. The principles and process/material characteristics are described. Potential applications and challenges are discussed. Finally, future research directions and prospects are proposed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Everton, S. K., Hirsch, M., Stravroulakis, P., Leach, R. K., & Clare, A. T. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.099 · Cited by 1,469
Process defects and in situ monitoring methods in metal powder bed fusion: a review
Grasso, M., & Colosimo, B. M. (2017) · Measurement Science and Technology · doi:10.1088/1361-6501/aa5c4f · Cited by 833
Cited by
Nazir, A., Gokcekaya, O., Md Masum Billah, K., Ertugrul, O., Jiang, J., Sun, J., & Hussain, S. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.111661 · Cited by 773
Recent progress on additive manufacturing of multi-material structures with laser powder bed fusion
Wang, D., Liu, L., Deng, G., Deng, C., Bai, Y., Yang, Y., Wu, W., Chen, J., Liu, Y., Wang, Y., et al. (2022) · Virtual and Physical Prototyping · doi:10.1080/17452759.2022.2028343 · Cited by 363
Advances in selective laser sintering of polymers
Han, W., Kong, L., & Xu, M. (2022) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ac9096 · Cited by 254
Bareth, T., Eder, D., Lehmann, M., Schlick, G., & Seidel, C. (2025) · Materials & Design · doi:10.1016/j.matdes.2025.114010 · Cited by 4
Metadata
- Authors
- Wei, C., Zhang, Z., Cheng, D., Sun, Z., Zhu, M., & Li, L.
- Venue
- International Journal of Extreme Manufacturing
- Publisher
- IOP Publishing
- Published
- 2020-12-18
- Volume
- 3
- Issue
- 1
- Pages
- 012003
- ISSN
- 2631-7990 (ISSN-L)
- 2631-8644
- OpenAlex
- W3110189425
- Cited by
- 236
- References
- 3
- FWCI
- 12.98
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: An overview of laser-based multiple metallic material additive manufacturing: from macro- to micro-scales. https://app.cochat.ai/papers/10.1088/2631-7990/abce04
- The paper
- Wei, C., Zhang, Z., Cheng, D., Sun, Z., Zhu, M., & Li, L. (2021). An overview of laser-based multiple metallic material additive manufacturing: from macro- to micro-scales. International Journal of Extreme Manufacturing. https://doi.org/10.1088/2631-7990/abce04
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.