The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Bioinspired Robotic Fingers Based on Pneumatic Actuator and 3D Printing of Smart Material
Abstract
In this article, we have proposed a novel robotic finger design principle aimed to address two challenges in soft pneumatic grippers—the controllability of the stiffness and the controllability of the bending position. The proposed finger design is composed of a 3D printed multimaterial substrate and a soft pneumatic actuator. The substrate has four polylactic acid (PLA) segments interlocked with three shape memory polymer (SMP) joints, inspired by bones and joints in human fingers. By controlling the thermal energy of an SMP joint, the stiffness of the joints is modulated due to the dramatic change in SMP elastic modulus around its glass transition temperature (Tg). When SMP joints are heated above Tg, they exhibit very small stiffness, allowing the finger to easily bend around the SMP joints if the attached soft actuator is actuated. When there is no force from the soft actuator, shape recovery stress in SMP contributes to the finger's shape restoration. Since each joint's rotation can be individually controlled, the position control of the finger is made possible. Experimental analysis has been conducted to show the finger's variable stiffness and the result is compared with the analytical values. It is found that the stiffness ratio can be 24.9 times for a joint at room temperature (20°C) and at an elevated temperature of 60°C when air pressure p of the soft actuator is turned off. Finally, a gripper composed of two fingers is fabricated for demonstration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Design, fabrication and control of soft robots
Rus, D., & Tolley, M. T. (2015) · Nature · doi:10.1038/nature14543 · Cited by 5,825
Soft robotics: a bioinspired evolution in robotics
Kim, S., Laschi, C., & Trimmer, B. (2013) · Trends in Biotechnology · doi:10.1016/j.tibtech.2013.03.002 · Cited by 2,092
Review of progress in shape-memory polymers
Liu, C., Qin, H., & Mather, P. T. (2007) · Journal of Materials Chemistry · doi:10.1039/b615954k · Cited by 1,942
Cited by
Fast‐Response, Stiffness‐Tunable Soft Actuator by Hybrid Multimaterial 3D Printing
Zhang, Y., Zhang, N., Hingorani, H., Ding, N., Wang, D., Yuan, C., Zhang, B., Gu, G., & Ge, Q. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806698 · Cited by 513
Shape Memory Alloy-Based Soft Gripper with Variable Stiffness for Compliant and Effective Grasping
Wang, W., & Ahn, S.-H. (2017) · Soft Robotics · doi:10.1089/soro.2016.0081 · Cited by 356
Mechanically Versatile Soft Machines through Laminar Jamming
Narang, Y. S., Vlassak, J. J., & Howe, R. D. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707136 · Cited by 256
Metadata
- Authors
- Yang, Y., Chen, Y., Li, Y., Chen, M. Z. Q., & Wei, Y.
- Venue
- Soft Robotics
- Publisher
- SAGE Publications
- Published
- 2017-06
- Volume
- 4
- Issue
- 2
- Pages
- 147-162
- ISSN
- 2169-5172 (ISSN-L)
- 2169-5180
- OpenAlex
- W2592463846
- Cited by
- 234
- References
- 3
- FWCI
- 9.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Bioinspired Robotic Fingers Based on Pneumatic Actuator and 3D Printing of Smart Material. https://app.cochat.ai/papers/10.1089/soro.2016.0034
- The paper
- Yang, Y., Chen, Y., Li, Y., Chen, M. Z. Q., & Wei, Y. (2017). Bioinspired Robotic Fingers Based on Pneumatic Actuator and 3D Printing of Smart Material. Soft Robotics. https://doi.org/10.1089/soro.2016.0034
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.