Engineering an In Vitro Model of a Functional Ligament from Bone to Bone
The DOI matches its Crossref record.
Abstract
For musculoskeletal tissues that transmit loads during movement, the interfaces between tissues are essential to minimizing injury. Therefore, the reproduction of functional interfaces within engineered musculoskeletal tissues is critical to the successful transfer of the technology to the clinic. The goal of this work was to rapidly engineer ligament equivalents in vitro that contained both the soft tissue sinew and a hard tissue bone mimetic. This goal was achieved using cast brushite (CaHPO(4)·2H(2)O) anchors to mimic bone and a fibrin gel embedded with fibroblasts to create the sinew. The constructs formed within 7 days. Fourteen days after seeding, the interface between the brushite and sinew could withstand a stress of 9.51 ± 1.7 kPa before failure and the sinew reached a Young's modulus value of 0.16 ± 0.03 MPa. Treatment with ascorbic acid and proline increased the collagen content of the sinew (from 1.34% ± 0.2% to 8.34% ± 0.37%), strength of the interface (29.24 ± 6 kPa), and modulus of the sinew (2.69 ± 0.25 MPa). Adding transforming growth factor-β resulted in a further increase in collagen (11.25% ± 0.39%), interface strength (42 ± 8 kPa), and sinew modulus (5.46 ± 0.68 MPa). Both scanning electron and Raman microscopy suggested that the interface between the brushite and sinew mimics the in vivo tidemark at the enthesis. This work describes a major step toward the development of tissue-engineered ligaments for the repair of ligament ruptures in humans.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Biodegradable Materials for Bone Repair and Tissue Engineering Applications
Sheikh, Z., Najeeb, S., Khurshid, Z., Verma, V., Rashid, H., & Glogauer, M. (2015) · Materials · doi:10.3390/ma8095273 · Cited by 782
Dicalcium phosphate cements: Brushite and monetite
Tamimi, F., Sheikh, Z., & Barralet, J. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.08.005 · Cited by 423
Vitamin C–enriched gelatin supplementation before intermittent activity augments collagen synthesis
Shaw, G., Lee-Barthel, A., Ross, M. L., Wang, B., & Baar, K. (2017) · The American Journal of Clinical Nutrition · doi:10.3945/ajcn.116.138594 · Cited by 227
Self-citationHeaton, L. E., Davis, J. K., Rawson, E. S., Nuccio, R. P., Witard, O. C., Stein, K. W., Baar, K., Carter, J. M., & Baker, L. B. (2017) · Sports Medicine · doi:10.1007/s40279-017-0759-2 · Cited by 158
“The notion that gelatin and vitamin C can improve collagen synthesis in connective tissues has been confirmed using an in-vitro model of a ligament where treating with pro-collagen amino acids and vitamin C increased collagen production three fold [190].”
BackgroundSelf-citationHolwerda, A. M., & van Loon, L. J. C. (2022) · Nutrition Reviews · doi:10.1093/nutrit/nuab083 · Cited by 117
“For instance, rodent and ex vivo tissue engineering models have indicated that the provision of free glycine and proline promotes an increase in collagen synthesis.(91,92) As such, dietary-protein sources that are rich in glycine and proline may be more suitable than dairy protein to promote tissue collagen synthesis.”
Background
Metadata
- Authors
- Paxton, J. Z., Grover, L. M., & Baar, K.
- Venue
- Tissue Engineering Part A
- Publisher
- SAGE Publications
- Published
- 2010-11
- Volume
- 16
- Issue
- 11
- Pages
- 3515-3525
- ISSN
- 1937-3341 (ISSN-L)
- 1937-335X
- OpenAlex
- W2118674008
- Cited by
- 85
- References
- 0
- FWCI
- 3.16
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Engineering an In Vitro Model of a Functional Ligament from Bone to Bone. https://app.cochat.ai/papers/10.1089/ten.tea.2010.0039
- The paper
- Paxton, J. Z., Grover, L. M., & Baar, K. (2010). Engineering an In Vitro Model of a Functional Ligament from Bone to Bone. Tissue Engineering Part A. https://doi.org/10.1089/ten.tea.2010.0039
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.