Heat stress and protective clothing: an emerging approach from the United States
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
There is little doubt that heat stress affects many workers adversely and that protective clothing generally adds to the burden. The ACGIH threshold limit value for heat stress is the guiding document for evaluation of heat stress in the United States. Adjustment factors have been used to reflect the change in heat stress imposed by different clothing ensembles. While the first proposed factors started with limited experimental data and professional judgment, heat balance methods in the laboratory have yielded better estimates of adjustment factors and for a wider selection of ensembles. These same experiments have provided the starting point to accounting for nonporous clothing in heat balance evaluation schemes such as required sweat rate. Proposed changes to the ACGIH TLV have been mentioned and a framework for thinking about controls presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Heat balance when wearing protective clothing
(1999) · The Annals of Occupational Hygiene · doi:10.1093/annhyg/43.5.289 · Cited by 1 · cited 2×
“As pointed out by Havenith (1999), heat balance analysis is a method to account for the exchange of energy between a person and the environment, which includes the work demands and the eects of clothing.”
Background
Cited by
Kjellstrom, T., Holmer, I., & Lemke, B. (2009) · Global Health Action · doi:10.3402/gha.v2i0.2047 · Cited by 802
“Protective clothing increased heat stress and reduced performance (36).”
BackgroundThermal Indices and Thermophysiological Modeling for Heat Stress
Havenith, G., & Fiala, D. (2015) · Comprehensive Physiology · doi:10.1002/cphy.c140051 · Cited by 262
Climate Change and Occupational Safety and Health: Establishing a Preliminary Framework
Schulte, P. A., & Chun, H. (2009) · Journal of Occupational and Environmental Hygiene · doi:10.1080/15459620903066008 · Cited by 206
Goldstein, B. D., Osofsky, H. J., & Lichtveld, M. Y. (2011) · New England Journal of Medicine · doi:10.1056/nejmra1007197 · Cited by 201
Rowlinson, S., YunyanJia, A., Li, B., & ChuanjingJu, C. (2014) · Accident Analysis & Prevention · doi:10.1016/j.aap.2013.08.011 · Cited by 176
“Supplementary methods have been devised to address the above mentioned limitations by standardising wind speed, categorising metabolic rate by types of work, and setting up clothing adjustment values for major work uniforms (Ashley et al., 2008; Bernard, 1999).”
Method
Metadata
- Venue
- The Annals of Occupational Hygiene
- Publisher
- Oxford University Press (OUP)
- Published
- 1999-07
- Volume
- 43
- Issue
- 5
- Pages
- 321-7
- ISSN
- 0003-4878 (ISSN-L)
- 1475-3162
- OpenAlex
- W2126749454
- Cited by
- 28
- References
- 1
- FWCI
- 0.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.