The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Detailed Stem Measurements of Standing Trees from Ground-Based Scanning Lidar
Open accessAbstract
A commercially available pan-and-tilt mount laser scanner was used to acquire data for subsequent three-dimensional modeling and measurement of standing forest trees. Methods were developed for identifying trees in range images and co-registering range images acquired from different vantage points. Upper-stem diameters and branch heights derived from the range images were compared to measurements made after the felling of a small number of loblolly pine (Pinus taeda L.) trees. Tree identification assumed bole cross-sections were circular, estimating their geometric centers at successive heights up the stem. Tree center estimates at multiple heights were then used to co-register images made from different vantage points. Co-registration (x, y) errors did not exceed 2.1 cm in any of the 18 pairwise registrations carried out. Results showed excellent agreement (average error < 1 cm) between the lidar-derived diameter estimates and caliper measurements for bole sections below the base of live crown. Less accurate estimates (<2 cm) were obtained for stem heights up to 13 m. Results indicated the potential for accurate assessment of branch or whorl heights using ground-based scanning lidar, with the greatest accuracy likely to be realized for branches near the base of the live crown and below it.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Object modeling by registration of multiple range images
Chen, Y., & Medioni, G. (2002) · Proceedings. 1991 IEEE International Conference on Robotics and Automation · doi:10.1109/robot.1991.132043 · Cited by 1,409
Cited by
Fast Automatic Precision Tree Models from Terrestrial Laser Scanner Data
Raumonen, P., Kaasalainen, M., Åkerblom, M., Kaasalainen, S., Kaartinen, H., Vastaranta, M., Holopainen, M., Disney, M., & Lewis, P. (2013) · Remote Sensing · doi:10.3390/rs5020491 · Cited by 828
Terrestrial laser scanning in forest ecology: Expanding the horizon
Calders, K., Adams, J., Armston, J., Bartholomeus, H., Bauwens, S., Bentley, L. P., Chave, J., Danson, F. M., Demol, M., Disney, M., et al. (2020) · Remote Sensing of Environment · doi:10.1016/j.rse.2020.112102 · Cited by 530
Dassot, M., Constant, T., & Fournier, M. (2011) · Annals of Forest Science · doi:10.1007/s13595-011-0102-2 · Cited by 512
Metadata
- Authors
- Henning, J. G., & Radtke, P. J.
- Venue
- Forest Science
- Published
- 2006-01-01
- Volume
- 52
- Issue
- 1
- Pages
- 67-80
- ISSN
- 0015-749X (ISSN-L)
- 1938-3738
- OpenAlex
- W2895573404
- Cited by
- 229
- References
- 1
- FWCI
- 12.02
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Detailed Stem Measurements of Standing Trees from Ground-Based Scanning Lidar. https://app.cochat.ai/papers/10.1093/forestscience/52.1.67
- The paper
- Henning, J. G., & Radtke, P. J. (2006). Detailed Stem Measurements of Standing Trees from Ground-Based Scanning Lidar. Forest Science. https://doi.org/10.1093/forestscience/52.1.67
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.