Cited by 217Rheology and Fluid Dynamics StudiesMaterial Dynamics and PropertiesPolymer crystallization and properties

The DOI matches its Crossref record.

Rheology and Processing of Polymeric Materials: Volume 1: Polymer Rheology

Han, Chang Dae·2007

DOI 10.1093/oso/9780195187823.001.0001

Open this paper in CoChat — free account

Abstract

Volume 1 presents first fundamental principles of the rheology of polymeric fluid including kinematics and stresses of a deformable body, the continuum theory for the viscoelasticity of flexible homogeneous polymeric liquids, the molecular theory for the viscoelasticity of flexible homogeneous polymeric liquids, and the experimental methods for the measurement of the rheological properties of poylmeric liquids. The materials presented are intended to set a stage for the subsequent chapters by introducing the basic concepts and principles of rheology, from both phenomenological and molecular perspectives, ofstructurally simple flexible and homogeneous polymeric liquids. Next, this volume presents the rheological behavior of structurally complex polymeric materials including miscible polymer blends, block copolymers, liquid-crystalline polymers, thermoplastic polyurethanes, immiscible polymer blends, perticulare-filled polymers, organoclay nanocomposites, molten polymers with dissolved gas, and thermosts.

Integrity signals

Registry

Crossref · 10.1093/oso/9780195187823.001.0001

Cites

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Sorted by citations

Items 101–200 of 216

Slit die rheology of thermoplastic starch during extrusion process
Kaseem, M., Hamad, K., & Deri, F. (2013) · International Journal of Plastics Technology · doi:10.1007/s12588-013-9044-x · Cited by 10
Efficiency of Different Chain-Linking Agents in the Synthesis of Long-Chain Branched Polypropylene: Molecular, Thermal, and Rheological Characterization
Guapacha, J., Vallés, E. M., Failla, M. D., & Quinzani, L. M. (2017) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2017.1373404 · Cited by 10
Power series for shear stress of polymeric liquid in large-amplitude oscillatory shear flow
Poungthong, P., Saengow, C., Giacomin, A. J., et al. (2018) · Korea-Australia Rheology Journal · doi:10.1007/s13367-018-0017-7 · Cited by 9
Printability Evaluation of UV-Curable Aqueous Laponite/Urethane-Based PEG Inks
Arslan, A., Roose, P., Houben, A., et al. (2023) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c02013 · Cited by 9
Darcy friction factor and Nusselt number in laminar tube flow of Carreau fluid
Kim, S. K. (2022) · Rheologica Acta · doi:10.1007/s00397-021-01317-w · Cited by 9
Preparation and studying properties of polybutene‐1/thermoplastic starch blends
Kaseem, M., Hamad, K., & Deri, F. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.35350 · Cited by 9
Improving Recycled Poly(lactic Acid) Biopolymer Properties by Chain Extension Using Block Copolymers Synthesized by Nitroxide-Mediated Polymerization (NMP)
Tapia, J. J. B., Champagne, P., Tenorio‐López, J. A., Vivaldo‐Lima, E., & Guerrero‐Santos, R. (2021) · Polymers · doi:10.3390/polym13162791 · Cited by 9
Evolutionary Multi-Objective Optimization of Extrusion Barrier Screws: Data Mining and Decision Making
Gaspar‐Cunha, A., da Costa, J. P. M., Delbem, A. C. B., et al. (2023) · Polymers · doi:10.3390/polym15092212 · Cited by 8
The plasticating sequence in barrier extrusion screws part I: Modeling
Gaspar‐Cunha, A., & Covas, J. A. (2013) · Polymer Engineering and Science · doi:10.1002/pen.23722 · Cited by 8
Extensional rheology of raw natural rubber from new clones of Hevea brasiliensis
Lotti, C., Moreno, R. M. B., Gonçalves, P. D. S., et al. (2011) · Polymer Engineering and Science · doi:10.1002/pen.22056 · Cited by 8
Injection Molding: Introduction and General Background
Kamal, M. R. (2009) · Carl Hanser Verlag GmbH & Co. KG eBooks · doi:10.3139/9783446433731.001 · Cited by 8
Self-Healable Hydrogels from Vegetable Oil: Preparation, Mechanism, and Applications
Mukherjee, C., Ghosh, A., Tamilarasi, M., et al. (2024) · Biomacromolecules · doi:10.1021/acs.biomac.4c01009 · Cited by 7
Modification of propylene-α-olefin copolymers by maleic anhydride grafting and blending
Riechert, V., Ferrofino, A. G., Ressia, J. A., et al. (2019) · International Journal of Polymer Analysis and Characterization · doi:10.1080/1023666x.2019.1598633 · Cited by 7
Quantitative characterization of functionally modified micron–submicron fibers for tissue regeneration: a review
Jassal, M., Sengupta, S., Warner, S. B., et al. (2013) · Textile Research Journal · doi:10.1177/0040517513481870 · Cited by 7
Viscosity model based on Giesekus equation
Kim, S. K. (2024) · Applied Rheology · doi:10.1515/arh-2024-0004 · Cited by 6
Особенности поведения вязкоупругопластических материалов, модели и система программ квазистатических испытаний полимеров и композитов для комплексного изучения их свойств и выбора и идентификации определяющих соотношений
Khokhlov, A. V. (2024) · Высокомолекулярные соединения С · doi:10.31857/s2308114724020025 · Cited by 6
Simulation of viscoelastic fluid flows in expansion geometry using finite volume approach
Azizi, M., A., A. R. S., Etemadi, M. H., et al. (2013) · Chinese Journal of Polymer Science · doi:10.1007/s10118-013-1336-2 · Cited by 6
Modified Single-Mode Leonov Rheological Equations for Polymer Melts and Solutions
Yang, J., Fan, L., & Dai, Y. (2015) · Journal of Macromolecular Science Part B · doi:10.1080/00222348.2015.1010682 · Cited by 6
Rheology and morphology of linear polyurethane and poly(methyl methacrylate) blends formed in situ
Shumskii, V. F., Kosyanchuk, L. F., Getmanchuk, I. P., et al. (2011) · Polymer Science Series A · doi:10.1134/s0965545x11090112 · Cited by 6
Perpendicular Orientation of Cylindrical Microdomains in Extruded Triblock Copolymer
Shimizu, K., Yasuda, T., & Saito, H. (2010) · Macromolecules · doi:10.1021/ma9016373 · Cited by 6
Gate Location and Injection Analysis of a Spur Gear
Ghazali, W. M., Idris, D. M. N. D., Sofian, A. H., et al. (2018) · MATEC Web of Conferences · doi:10.1051/matecconf/201822506012 · Cited by 6
Influence of soapstone waste on the mechanical and rheological properties of high‐density polyethylene
de Sousa, G. S., da Silva, G. D. A. S., & d’Almeida, J. R. M. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.50966 · Cited by 6
Topographically Uniform but Chemically Heterogeneous Nanostructures by Nanoimprinting Demixed Polymer Blends
Wang, Z., Ahn, D. U., & Ding, Y. (2010) · Langmuir · doi:10.1021/la102523t · Cited by 6
Electron beam irradiation cross-linked PP/LDPE blends with triple-shape memory capabilities
Shi, X., & Fu, C. (2024) · Journal of Materials Chemistry C · doi:10.1039/d4tc01140f · Cited by 4
Effect of size‐distributed bubbles on acoustic properties of an elastic tube with polymeric liquid
Levitsky, S., Bergman, R., & Haddad, J. (2012) · Multidiscipline Modeling in Materials and Structures · doi:10.1108/15736101211281533 · Cited by 5
Numerical modeling of multilayer film coextrusion with experimental validation
Champion, J., Looney, M. K., & Simmons, M. J. H. (2014) · Polymer Engineering and Science · doi:10.1002/pen.24022 · Cited by 5
Viscoelastic behavior and sol‐gel transition of cellulose/silk fibroin/1‐butyl‐3‐methylimidazolium chloride extended from dilute to concentrated solutions
Yao, Y., Yan, Z., Li, Z., et al. (2017) · Polymer Engineering and Science · doi:10.1002/pen.24802 · Cited by 5
Rheology and microstructure of yogurt
Ahmed, J., Barua, S., & Roy, S. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-823983-4.00020-0 · Cited by 5
A different extensional viscosity prediction based on entry pressure drop
Yang, J., Dai, Y., & Li, J.-G. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.40563 · Cited by 5
Novel Bio-based Immiscible Blends of Poly(Butylene Succinate)/Poly(Ethylene Brassylate): Effect of PEB Loading on Their Rheological, Morphological, Thermal and Mechanical Properties
Sartillo-Bernal, W., Macías, R. Y., López-González, H. R., Lara-Sánchez, J. F., Rivera, J. G., & Fonseca‐Florido, H. A. (2024) · Journal of Polymers and the Environment · doi:10.1007/s10924-024-03408-0 · Cited by 4
Thermally Healable Polyurethane Elastomers Based on Biomass Polyester Polyol from Isosorbide and Dimer Fatty Acid
Shin, S.-R., & Lee, D.-S. (2024) · Polymers · doi:10.3390/polym16243571 · Cited by 4
Physical Properties of Adhesives
Dillard, D. (2011) · Springer eBooks · doi:10.1007/978-3-642-01169-6_17 · Cited by 4
Falling ball method for determining zero shear and shear‐dependent viscosity of polymeric systems: Solutions, melts, and composites
Suri, P., Patel, S. A., & Chhabra, R. P. (2022) · Journal of Vinyl and Additive Technology · doi:10.1002/vnl.21966 · Cited by 4
Effect of Long-Chain Branch of Poly(methyl acrylate-co-1-octene) on the Vulcanization and Mechanical Properties
Xiao, C., Jiang, L., & Dan, Y. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b00328 · Cited by 4
Melt Elastic Properties during Capillary Extrusion of PP Impact Copolymer/Styrene-Butadiene-Styrene Block Copolymer Blends
Das, V., & Pandey, A. K. (2013) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2013.820749 · Cited by 4
Preparation of biopolymer films by aqueous tape casting processing
Vogelsang, D. F., Perilla, J. E., Hurtado, G. B., et al. (2014) · Journal of Plastic Film & Sheeting · doi:10.1177/8756087914523440 · Cited by 4
Creep-Recovery Test: A Critical Tool for Rheological Characterization of Drilling Fluids
Bui, B. T., & Tutuncu, A. N. (2013) · Unconventional Resources Technology Conference (URTeC) · doi:10.1190/urtec2013-107 · Cited by 4
Rheo-NMR of the Secondary Flow of Non-Newtonian Fluids in Square Ducts
Schroeder, C. B. K., & Jeffrey, K. R. (2011) · Physical Review Letters · doi:10.1103/physrevlett.106.046001 · Cited by 4
Non‐Newtonian Fluids
Patel, S. A., & Chhabra, R. P. (2020) · Kirk-Othmer Encyclopedia of Chemical Technology · doi:10.1002/0471238961.koe00057 · Cited by 4
Evaluation and characterization of waste-derived eggshells as filler in polylactic acid filament feedstock for material extrusion additive manufacturing: a step towards circular manufacturing strategies
Leclair, J.-P., Strugova, D., Cree, D. E., & Hof, L. A. (2025) · Progress in Additive Manufacturing · doi:10.1007/s40964-025-00946-4 · Cited by 3
Measurement Techniques
Dealy, J. M., & Wang, J. (2013) · Engineering materials and processes · doi:10.1007/978-94-007-6395-1_6 · Cited by 3
Effects of molecular structure on thermal, rheological and mechanical properties of drip irrigation PE tapes
Haghparast, S., Pircheraghi, G., & Houshmandmoayed, S. (2022) · Journal of Polymer Research · doi:10.1007/s10965-022-03255-4 · Cited by 3
Families of Stress-Strain, Relaxation, and Creep Curves Generated by a Nonlinear Model for Thixotropic Viscoelastic-Plastic Media Accounting for Structure Evolution Part 1. The model, Its Basic Properties, Integral Curves, and Phase Portraits
Khokhlov, A. V., & Gulin, V. V. (2024) · Mechanics of Composite Materials · doi:10.1007/s11029-024-10174-6 · Cited by 3
Application of Giesekus Model for Capillary Extrusion of Rubber Compound
Talib, N. A., & Ertunç, Ö. (2019) · JOURNAL OF CHEMICAL ENGINEERING OF JAPAN · doi:10.1252/jcej.18we070 · Cited by 3
Research on the rheological and flow characteristics of a supramolecular gel in fractures
Wang, B., Sun, J., Shen, F., Lv, K., & Wang, J. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.50823 · Cited by 3
Finite element modeling of the flow of a rubber compound through an axisymmetric die using the CEF viscoelastic constitutive equation
Ghoreishy, M. H. R., Bagheri‐Jaghargh, M., Naderi, G., et al. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36482 · Cited by 3
Modeling and Analysis of Process Parameters for Plastic Injection Molding of Base-Cover
Yin, Y. F. (2012) · Advanced materials research · doi:10.4028/www.scientific.net/amr.602-604.1930 · Cited by 3
Rheology of Cellulose/Alginic Acid Blends with 1‐Allyl‐3‐Methylimidazolium Chloride as Solvent
Xu, Z., Yao, Y., Sheng, J., et al. (2019) · Polymer Engineering and Science · doi:10.1002/pen.25277 · Cited by 3
Liquid Crystalline Composite
Isayev, А. I. (2012) · Wiley Encyclopedia of Composites · doi:10.1002/9781118097298.weoc125 · Cited by 3
Influence of the addition of different fillers on the properties of hybrid composite recycled polyethylene/cotton linter fibers/montmorillonite clay
Reinaldo, J. S., Duarte, I. D., Bezerra, I. S., et al. (2023) · Journal of Composite Materials · doi:10.1177/00219983231209740 · Cited by 2
Correlations for friction factor of Carreau fluids in a laminar tube flow
Kim, S. K. (2025) · Applied Rheology · doi:10.1515/arh-2025-0033 · Cited by 2
Finding the underlying viscoelastic constitutive equation via universal differential equations and differentiable physics
Rodrigues, E. C., Thompson, R. L., Oliveira, D. A. B., et al. (2025) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2025.111788 · Cited by 2
Viscosity Reduction in Diluted Polyethylene Melts: A Comparative Study of Semiempirical, Viscoelastic, and Equation‐of‐State Modeling Frameworks
Viehböck, E. G., Hammer, A., Kirchmayr, M., et al. (2026) · Polymer Engineering and Science · doi:10.1002/pen.70432 · Cited by 2
Families of Stress-Strain, Relaxation, and Creep Curves Generated by a Nonlinear Model for Thixotropic Viscoelastic-Plastic Media Accounting for Structure Evolution Part 3. Creep Curves
Khokhlov, A. V., & Gulin, V. V. (2024) · Mechanics of Composite Materials · doi:10.1007/s11029-024-10204-3 · Cited by 2
Dynamic Modeling and Simulations of Molecular Weight Distributions In Continuous Stirred Tank Reactors for Solution Polymerization of Methyl Methacrylate
Robinson, B., & Choi, K. Y. (2025) · Macromolecular Reaction Engineering · doi:10.1002/mren.202400054 · Cited by 2
Creep Behavior of a Polymer Blend Melt and 3D Observation of the Deformed Bicontinuous Structure by a High-contrast X-ray CT
Takahashi, M., Hatakeyama, H., & Nishikawa, Y. (2016) · Nihon Reoroji Gakkaishi · doi:10.1678/rheology.44.9 · Cited by 2
Comparison of Different Approaches for Analyzing Converging Flows for Polymer Fluids
Yang, J., Zhu, L., Qin, G., et al. (2015) · Macromolecular Materials and Engineering · doi:10.1002/mame.201500018 · Cited by 2
Influence of trisilanol isooctyl POSS content on the structure, morphology and rheological properties of thermoplastic polyurethane (TPU)
Fiório, R., Danda, C., & Maia, J. M. (2020) · Journal of Polymer Engineering · doi:10.1515/polyeng-2020-0154 · Cited by 2
Numerical and experimental analysis of a flame-retardant polymer material after extrusion through the printing nozzle of fused filament fabrication system
Ni, A., Prabhakar, M. N., Suk, I.-H., et al. (2021) · Mechanics Based Design of Structures and Machines · doi:10.1080/15397734.2021.1919525 · Cited by 2
Melt elasticity and flow properties of polypropylene impact copolymer/polyolefin elastomer blends subjected to varied capillary extrusion conditions
Das, V., Pandey, A., Tripathi, D., et al. (2021) · Progress in Rubber Plastics and Recycling Technology · doi:10.1177/14777606211019415 · Cited by 2
Relationship between the Rheological and Molecular Structural Characteristics of Polypropylene
Larionov, I. S., Balkaev, D. A., Salakhov, I. I., Badrutdinova, A. V., Рафаэльевич, А. Р., & Амирова, Л. М. (2022) · Polymer Science Series A · doi:10.1134/s0965545x22700432 · Cited by 2
Potentialities of cellulose nanofibers (CNFs) in low density polyethylene (LDPE) composites
Agnes, É. A., Hillig, É., Zattera, A. J., Beltrami, L. V. R., Covas, J. A., Hilliou, L. H. G., Sousa, J. D., Calado, L., Pinto, M., & Lucas, A. D. A. (2024) · European Journal of Wood and Wood Products · doi:10.1007/s00107-024-02105-y · Cited by 2
Polypropylene composite material and its rheological and mechanical properties depending on the size of the fillerCaCO3
Bilalova, E. A., Prut, E. V., & Kuznetsova, O. (2019) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/525/1/012006 · Cited by 2
Characterization of Polymer Blends: Rheological Studies
Yu, Y. (2014) · doi:10.1002/9783527645602.ch04 · Cited by 2
Rheology and Processing of Polymer/ POSS Nanocomposites
Pielichowski, K., Majka, T. M., & Raftopoulos, K. N. (2016) · doi:10.1002/9781118969809.ch8 · Cited by 2
Polymer Rheology
Ortíz‐Rodríguez, E. (2013) · doi:10.1002/9781118480793.ch22 · Cited by 2
Development of an innovative additive manufacturing equipment containing a co-rotating twin screw extrusion unit
Netto, J. M. J. (2022) · doi:10.11606/t.18.2022.tde-26012023-181116 · Cited by 2
Rouse and Zimm Short-Time Exponents When Subtracting the Solvent Contribution in Semidilute Polymeric Solutions
Domínguez-García, P., & Jeney, S. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c00371 · Cited by 1
Char to the Rescue: Processing and Transfer of Flame‐Retardant Epoxy Resins, Adjusting the Fire Behavior and Post‐Fire Structural Integrity of Glass Fiber Composites
Sunder, S., Rozo, M. J., Deshpande, H., et al. (2025) · Journal of Polymer Science · doi:10.1002/pol.20250692 · Cited by 1
Data‐Driven Design of Co‐Continuous Morphology in PS / PMMA Two‐Phase Polymer Blends: A Theoretical, Experimental, and Machine Learning Approach
Castro‐Landinez, J. F., Paul, T., Albuquerque, R. Q., et al. (2026) · Polymer Engineering and Science · doi:10.1002/pen.70497 · Cited by 1
ESTUDIO DE MEZCLAS DE POLI (ÁCIDO LÁCTICO) CON POLIPROPILENO Y NANOCOMPUESTOS CON MONTMORILLONITA
Rosales, C., Sabino, M. A., Perera, R., et al. (2014) · Revista Latinoamericana de Metalurgia y Materiales/Revista Latinoamericana de Metalurgía y Materiales · Cited by 1
Rheological properties of polymer melts with high elasticity
Feranc, J., Matvejová, M., Alexy, P., et al. (2017) · AIP conference proceedings · doi:10.1063/1.4982994 · Cited by 1
Oscillating shear capillary rheometry (OSCAR) for polymer melts
Nichetti, D. (2019) · Journal of Polymer Engineering · doi:10.1515/polyeng-2019-0231 · Cited by 1
Flow characteristic during injection molding of PC/MWNT nanocomposites
Suh, J.-W., Yoo, Y., & Kim, S. K. (2020) · Korea-Australia Rheology Journal · doi:10.1007/s13367-020-0025-2 · Cited by 1
Thermal and Rheological Properties of Carbon Nanoparticle Dispersions
Ranjbar, B., Foroughirad, S., & Ranjbar, Z. (2024) · Springer eBooks · doi:10.1007/978-3-031-32150-4_41 · Cited by 1
INFLUENCE OF STRUCTURE EVOLUTION AND LOAD LEVEL ON THE PROPERTIES OF CREEP AND RECOVERY CURVES PRODUCED BY A NONLINEAR MODEL FOR THIXOTROPIC VISCOELASTOPLASTIC MEDIA
Khokhlov, A. V., & Gulin, V. V. (2024) · Физическая мезомеханика · doi:10.55652/1683-805x_2024_27_5_77-103 · Cited by 1
Influence of Structural Evolution and Load Level on the Properties of Creep and Recovery Curves Generated by a Nonlinear Model for Thixotropic Viscoelastoplastic Media
Khokhlov, A. V., & Gulin, V. V. (2025) · Physical Mesomechanics · doi:10.1134/s1029959923600891 · Cited by 1
Numerical simulation of polymer filling process by a combined finite element/discontinuous Galerkin/level set method
Gao, P., Ouyang, J., & Zhou, W. (2018) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.23314 · Cited by 1
Physical Properties
Dillard, D. (2018) · Springer eBooks · doi:10.1007/978-3-319-55411-2_17 · Cited by 1
Rheometry
Wilczyński, K. J. (2021) · Carl Hanser Verlag GmbH & Co. KG eBooks · doi:10.1007/978-1-56990-661-3_2 · Cited by 1
Chemoelastodynamics of Responsive Gels
Boissonade, J., Borckmans, P., Kepper, P. D., et al. (2010) · doi:10.1002/9783527632602.ch9 · Cited by 1
Potentialities of Cellulose Nanofibers (CNF) in Low Density Polyethylene (LDPE) CompositesPreprint
Agnes, É. A., Hillig, É., Zattera, A. J., Beltrami, L. V. R., Covas, J. A., Hilliou, L. H. G., Sousa, J. D., Pequeneza, M. L. C., & Pinto, M. (2023) · Research Square · doi:10.21203/rs.3.rs-2869949/v1 · Cited by 1
Synthèse et étude des propriétés physico-chimiques des poly(butylène succinate)s linéaire et branché
Garin, M. (2012) · doi:10.70675/85cf229dzaef1z468azbfc3zfaa81d6a1174 · Cited by 1
Liquid Crystalline Polymers: Theories, Experiments, and Nematodynamic Simulations of Shearing Flows
Chen, H., & Leonov, A. I. (2010) · doi:10.1002/9783527630257.ch11
Numerical modeling of viscoelastic counter flows using the pressure correction method
Makarov, I. A. (2011) · Fluid Dynamics · doi:10.1134/s0015462811060044
Effects of degradation during the processing on morphology and tensile properties of nanocomposites blends of poly (lacti acid) with polyethylene
Rosales, C., Sabino, M. A., Perera, R., Rojas, H., Baca, O., & de Materiales, L. (2014) · Redalyc (Universidad Autónoma del Estado de México)
A rheological investigation of starch gels and solutions and its relationship with structural properties
Chávez, S. Y., & Alejandro, C. (2021)
Fluid Mechanics
Chhabra, R. P., & Patel, S. A. (2020) · Kirk-Othmer Encyclopedia of Chemical Technology · doi:10.1002/0471238961.06122109191514.a01.pub3
Rheometry
Wilczyński, K. J. (2020) · Carl Hanser Verlag GmbH & Co. KG eBooks · doi:10.3139/9781569906613.002
Physical Properties
Dillard, D. (2017) · Springer eBooks · doi:10.1007/978-3-319-42087-5_17-2
Rheology
Wilczyński, K. J. (2020) · Carl Hanser Verlag GmbH & Co. KG eBooks · doi:10.3139/9781569906613.001
Origin of Polymer Materials
Thangadurai, T. D., Manjubaashini, N., Thomas, S., et al. (2022) · doi:10.1002/9783527838554.ch1
Shear-Induced Molecular Orientation of Compression Moulded PE-HD Sheets
Chomiak, M., & STABIK, J. (2022) · Advances in Science and Technology – Research Journal · doi:10.12913/22998624/151925
Dynamic-Mechanical and Rheological Properties of the Photo-Degraded Low-Density Polyethylene/Manganese Stearate/Trisilver Phosphate/Cadmium Selenide Composites
Gharehdashli, A., Mortazavi, S., & Rashidi, H. (2022) · Polymer Science Series A · doi:10.1134/s0965545x22700560
Effect of iPP Molecular Weight on Dynamic Viscoelastic Properties of iPP/EPDM Blends
Prut, E. V., Medintseva, T. I., & Kuznetsova, O. (2023) · Russian Journal of Physical Chemistry B · doi:10.1134/s1990793123020306
Aufbereitung – Verfahrenstechnik der Polymerherstellung
Kohlgrüber, K. (2019) · Carl Hanser Verlag GmbH & Co. KG eBooks · doi:10.1007/978-3-446-46079-9_2
Polymer Processing – Process Technology of Polymer Production
Kohlgrüber, K. (2022) · Carl Hanser Verlag GmbH & Co. KG eBooks · doi:10.1007/978-1-56990-838-9_2
Rheology
Wilczyński, K. J. (2021) · Carl Hanser Verlag GmbH & Co. KG eBooks · doi:10.1007/978-1-56990-661-3_1
Thermal and Rheological Properties of Carbon Nanoparticle Dispersions
Ranjbar, B., Foroughirad, S., & Ranjbar, Z. (2023) · Springer eBooks · doi:10.1007/978-3-031-14955-9_41-1
Polyethylene Brassylate as a Rheological Modifier of Polybutylene Succinate: Effect on the Morphology, Mechanical Properties, and Thermal Behavior of Their Biodegradable BlendsPreprint
Sartillo-Bernal, W., Macías, R. Y., López-González, H. R., Lara-Sánchez, J. F., Rivera, J. G., & Fonseca‐Florido, H. A. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4800123

Authors: Han, C. D.
Corresponding author: Han, Chang Dae
Publisher: Oxford University PressNew York
Published: 2007-01-25
DOI: 10.1093/oso/9780195187823.001.0001
OpenAlex: W3099304114
Cited by: 217
References: 0
Citations by year: 2026: 10 · 2025: 11 · 2024: 17 · 2023: 9 · 2022: 17 · 2021: 13 · 2020: 15 · 2019: 15 · 2018: 12 · 2017: 11 · 2016: 11 · 2015: 10 · 2014: 14 · 2013: 11 · 2012: 9
FWCI: 2.86
Type: book
Language: en
Open access: closed
Topics: Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Rheology and Fluid Dynamics Studies
Physical Sciences › Materials Science › Materials Chemistry › Material Dynamics and Properties
Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
Keywords: polymer rheology, polymeric liquids, viscoelasticity, continuum mechanics, rheometry, polymer blends, block copolymers, liquid crystalline polymers, thermoplastic polyurethane, immiscible polymer blends, filled polymers, organoclay nanocomposites, thermoplastics

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Rheology and Processing of Polymeric Materials: Volume 1: Polymer Rheology

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cited by

Related

Metadata

Record

About these checks