The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Barrier and Mechanical Properties of Starch‐Clay Nanocomposite Films
Abstract
The poor barrier and mechanical properties of biopolymer‐based food packaging can potentially be enhanced by the use of layered silicates (nanoclay) to produce nanocomposites. In this study, starch‐clay nanocomposites were synthesized by a melt extrusion method. Natural (MMT) and organically modified (I30E) montmorillonite clays were chosen for the nanocomposite preparation. The structures of the hybrids were characterized by X‐ray diffraction (XRD) and transmission electron microscopy (TEM). Films were made through casting using granulate produced by a twin‐screw extruder. Starch/MMT composite films showed higher tensile strength and better water vapor barrier properties than films from starch/I30E composites, as well as pristine starch, due to formation of intercalated nanostructure. To find the best combinations of raw materials, the effects of clay content (0–21 wt% MMT), starch sources (corn, wheat, and potato), and amylose content (≈0, 28, 55, 70, 100%) on barrier and mechanical properties of the nanocomposite films were investigated. With increase in clay content, significantly higher (15–92%) tensile strength (TS), and lower (22–67%) water vapor permeability (WVP) were obtained. The barrier and mechanical properties of nanocomposite films did not vary significantly with different starch sources. Nanocomposite films from regular corn starch had better barrier and mechanical properties than either high amylopectin or high‐amylose‐based nanocomposite films. WVP, TS, and elongation at break (%E) of the films did not change significantly as amylose content increased beyond 50%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
New polylactide/layered silicate nanocomposites. 1. Preparation, characterization, and properties
Sinha Ray, S., Maiti, P., Okamoto, M., Yamada, K., & Ueda, K. (2002) · Macromolecules · doi:10.1021/ma011613e · Cited by 607
Cited by
Bio-nanocomposites for food packaging applications
Rhim, J.-W., Park, H.-M., & Ha, C.-S. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.008 · Cited by 1,980
Tang, X., & Alavi, S. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.01.030 · Cited by 593
Self-citationStarch-based nano-biocomposites
Xie, F., Pollet, E., Halley, P. J., & Avérous, L. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.002 · Cited by 550
Recent Advances in Biopolymers and Biopolymer-Based Nanocomposites for Food Packaging Materials
Tang, X. Z., Kumar, P., Alavi, S., & Sandeep, K. P. (2012) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2010.500508 · Cited by 477
Self-citationOthman, S. H. (2014) · Agriculture and Agricultural Science Procedia · doi:10.1016/j.aaspro.2014.11.042 · Cited by 442
Metadata
- Authors
- Tang, X., Alavi, S., & Herald, T. J.
- Venue
- Cereal Chemistry
- Publisher
- Wiley
- Published
- 2008-05
- Volume
- 85
- Issue
- 3
- Pages
- 433-439
- ISSN
- 0009-0352 (ISSN-L)
- 1943-3638
- OpenAlex
- W1967276463
- Cited by
- 179
- References
- 1
- FWCI
- 2.53
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Barrier and Mechanical Properties of Starch‐Clay Nanocomposite Films. https://app.cochat.ai/papers/10.1094/cchem-85-3-0433
- The paper
- Tang, X., Alavi, S., & Herald, T. J. (2008). Barrier and Mechanical Properties of Starch‐Clay Nanocomposite Films. Cereal Chemistry. https://doi.org/10.1094/cchem-85-3-0433
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.