The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Mapping the Structural Properties of the Lumbosacral Vertebral Endplates
Abstract
STUDY DESIGN: A biomechanical investigation using indentation tests in a human cadaveric model to seek variation in the structural properties across the lower lumbar and sacral endplates. OBJECTIVES: To determine 1) if there are regional differences in endplate strength and 2) whether any differences identified are affected by spinal level (lumbar spine vs. sacrum) or endplate (superior vs. inferior). SUMMARY OF BACKGROUND DATA: It has been postulated that some regions of the vertebral body may be stronger than others. Conclusive data, either supporting or disproving this theory, would be valuable for both spine surgeons and implant designers because one mode of failure of interbody implants is subsidence into one or both adjacent vertebrae. METHODS: Indentation tests were performed at 27 standardized test sites in 62 bony endplates of intact human vertebrae (L3-S1) using a 3-mm-diameter, hemispherical indenter with a test rate of 0.2 mm/sec to a depth of 3 mm. The failure load and stiffness at each test site were determined using the load-displacement curves. Three-way analyses of variance were used to analyze the resulting data. RESULTS: Both the failure load and stiffness varied significantly across the endplate surfaces (P < 0.0001), with posterolateral regions being stronger and stiffer than the central regions. Characteristic distributions were identified in the lumbar superior, lumbar inferior, and sacral endplates. The failure load distributions were found to differ in 1) the superior lumbar and sacral endplates (P = 0.0077), 2) the inferior lumbar and sacral endplates (P = 0.0014), and 3) the superior and inferior lumbar endplates (P < 0.0001). The sacral and inferior lumbar endplates were both found to be stronger than the superior lumbar endplates (sacrum, P = 0.054; inferior, P = 0.008) but were not themselves significantly different (P = 0.89). CONCLUSIONS: Highly significant regional strength and stiffness variations were identified in the lumbar and sacral endplates. The center of the bone, where implants are currently placed, is the weakest part of the lumbar endplates and is not the strongest region of the sacral endplate.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A comprehensive classification of thoracic and lumbar injuries
Magerl, F., Aebi, M., Gertzbein, S. D., Harms, J., & Nazarian, S. (1994) · European Spine Journal · doi:10.1007/bf02221591 · Cited by 2,072
Fracture of the Vertebral End-Plate in the Lumbar Spine: An Experimental Biomechanical Investigation
Perey, O. (1957) · Acta Orthopaedica Scandinavica · doi:10.3109/ort.1957.28.suppl-25.01 · Cited by 190
Jost, B., Cripton, P. A., Lund, T., Oxland, T. R., Lippuner, K., Jaeger, P., & Nolte, L.-P. (1998) · European Spine Journal · doi:10.1007/s005860050043 · Cited by 186
Self-citationVariations in strength and structure of cancellous bone at the knee
Behrens, J. C., Walker, P. S., & Shoji, H. (1974) · Journal of Biomechanics · doi:10.1016/0021-9290(74)90010-4 · Cited by 171
Regional Variations in the Compressive Properties of Lumbar Vertebral Trabeculae
Keller, T. S., HANSSON, T. H., Abram, A. C., Spengler, D. M., & Panjabi, M. M. (1989) · Spine · doi:10.1097/00007632-198909000-00016 · Cited by 147
The Microscopic Hardness of Bone
Weaver, J. K. (1966) · Journal of Bone and Joint Surgery · doi:10.2106/00004623-196648020-00006 · Cited by 118
Glenoid cancellous bone strength and modulus
Anglin, C., Tolhurst, P., WYSS, U. P., & Pichora, D. R. (1999) · Journal of Biomechanics · doi:10.1016/s0021-9290(99)00087-1 · Cited by 106
THE STRUCTURE OF THE VERTEBRAL SPONGIOSA
Amstutz, H. C., & SISSONS, H. A. (1969) · Journal of Bone and Joint Surgery - British Volume · doi:10.1302/0301-620x.51b3.540 · Cited by 59
The assessment of vertebral bone macroarchitecture with x-ray computed tomography
Flynn, M. J., & CODY, D. D. (1993) · Calcified Tissue International · doi:10.1007/bf01673430 · Cited by 43
Three-dimensional photographic study of cancellous bone in human fourth lumbar vertebral bodies
Jayasinghe, J. A. P., Jones, S. J., & BOYDE, A. (1994) · Anatomy and Embryology · doi:10.1007/bf00239013 · Cited by 41
Cited by
Biomechanics of the human intervertebral disc: A review of testing techniques and results
Newell, N., Little, J., Christou, A., Adams, M., Adam, C., & Masouros, S. (2017) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.01.037 · Cited by 392
Rajasekaran, S., Babu, J. N., Arun, R., Armstrong, B. R. W., Shetty, A. P., & Murugan, S. (2004) · Spine · doi:10.1097/01.brs.0000148014.15210.64 · Cited by 339
The Role of the Vertebral End Plate in Low Back Pain
Lotz, J. C., Fields, A. J., & Liebenberg, E. C. (2013) · Global Spine Journal · doi:10.1055/s-0033-1347298 · Cited by 292
Polikeit, A., Ferguson, S. J., Nolte, L. P., & Orr, T. E. (2003) · European Spine Journal · doi:10.1007/s00586-002-0505-8 · Cited by 287
Biomechanics of the aging spine
Ferguson, S. J., & Steffen, T. (2003) · European Spine Journal · doi:10.1007/s00586-003-0621-0 · Cited by 257
Metadata
- Authors
- Grant, J. P., Oxland, T. R., & Dvorak, M. F.
- Venue
- Spine
- Published
- 2001-04
- Volume
- 26
- Issue
- 8
- Pages
- 889-896
- ISSN
- 0362-2436 (ISSN-L)
- OpenAlex
- W1998620544
- Cited by
- 351
- References
- 13
- FWCI
- 3.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mapping the Structural Properties of the Lumbosacral Vertebral Endplates. https://app.cochat.ai/papers/10.1097/00007632-200104150-00012
- The paper
- Grant, J. P., Oxland, T. R., & Dvorak, M. F. (2001). Mapping the Structural Properties of the Lumbosacral Vertebral Endplates. Spine. https://doi.org/10.1097/00007632-200104150-00012
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.