Constitutive Framework for Biodegradable Polymers with Applications to Biodegradable Stents
The DOI matches its Crossref record; 35 of the 36 references it cites were found in a registry or an index.
Abstract
Biodegradable polymeric stents must provide mechanical support of the stenotic artery wall up to several months while being subjected to cyclic loading that affects the degradation process. To understand the applicability and efficacy of biodegradable polymers, a two-pronged approach involving experiments and theory is necessary. This article addresses the second aspect, the development of a theoretical framework within which the behavior of such materials can be studied. We present a constitutive model for polymers that undergo deformation induced-degradation. For our purpose, degradation is the scission of chemical bonds of the backbone chain, results in molecular weight reduction, and consequently in the commonly observed softening. A model of a solid capable of degradation, which in its absence responds like an elastic solid, is developed. We assume the existence of a scalar field that reflects the local state of degradation and changes the properties of the material. A rate equation for the measure of degradation that depends on strain is coupled with the balance of linear momentum. Uniaxial extension of a body, which in the absence of degradation behaves as a neo-Hookean elastic solid, exhibits stress relaxation, creep, and hysteresis, due to degradation.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
The Non-Linear Field Theories of Mechanics
Truesdell, C., & Noll, W. (1965) · Encyclopedia of Physics / Handbuch der Physik · doi:10.1007/978-3-642-46015-9_1 · Cited by 3,365
The physics of rubber elasticity
Zimm, B. H., & Kilb, R. W. (1959) · Journal of Physics and Chemistry of Solids · doi:10.1016/0022-3697(59)90114-3 · Cited by 2,950
(2016) · CRC Press eBooks · doi:10.1201/b12801 · Cited by 2,031
Large-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366
Initial and 6-Month Results of Biodegradable Poly- l -Lactic Acid Coronary Stents in Humans
Tamai, H., Igaki, K., Kyo, E., Kosuga, K., Kawashima, A., Matsui, S., Komori, H., Tsuji, T., Motohara, S., & Uehata, H. (2000) · Circulation · doi:10.1161/01.cir.102.4.399 · Cited by 806
A pseudo–elastic model for the Mullins effect in filled rubber
Ogden, R. W., & Roxburgh, D. G. (1999) · Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.1999.0431 · Cited by 747
Handbook of Biodegradable Polymers
(1998) · CRC Press eBooks · doi:10.1201/9780367802219 · Cited by 702
Orthopaedic applications for PLA‐PGA biodegradable polymers
Athanasiou, K., Agrawal, C., Barber, F., & Burkhart, S. (1998) · Arthroscopy · doi:10.1016/s0749-8063(98)70099-4 · Cited by 487
The Non-Linear Field Theories of Mechanics
Truesdell, C., & Noll, W. (2004) · The Non-Linear Field Theories of Mechanics · doi:10.1007/978-3-662-10388-3_1 · Cited by 359
Research works printed but not linked: 1
- Chu, 1985, Surgical Research, Recent Developments: Proceedings of the First Annual Scientific Session of the Academy of Surgical Research., 111
Cited by
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Lifetime prediction of biodegradable polymers
Laycock, B., Nikolić, M., Colwell, J. M., Gauthier, E., Halley, P., Bottle, S., & George, G. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.02.004 · Cited by 662
“[365, 366] who developed a sophisticated model to account for the accelerated breakdown of PLA articles (in this case, stents) under uniaxial extension.”
BackgroundBergström, J. S., & Hayman, D. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-015-1455-8 · Cited by 266
Additive Manufacturing of Biomaterials—Design Principles and Their Implementation
Mirzaali, M. J., Moosabeiki, V., Rajaai, S. M., Zhou, J., & ZADPOOR, A. A. (2022) · Materials · doi:10.3390/ma15155457 · Cited by 155
“Its biocompatibility, biodegradability, and bioresorbability have made it a suitable candidate for a broad range of biomedical applications, including neural and vascular regeneration [294], stents [295–297], surgical sutures [298], plates and screws for craniomaxillofacial bone fixation [299], interference screws in…”
BackgroundA Review of Material Degradation Modelling for the Analysis and Design of Bioabsorbable Stents
Boland, E. L., Shine, C. J., Kelly, N., Sweeney, C. A., & McHugh, P. E. (2015) · Annals of Biomedical Engineering · doi:10.1007/s10439-015-1413-5 · Cited by 108
Polymer-Matrix Composites: Characterising the Impact of Environmental Factors on Their Lifetime
Barreira-Pinto, R., Carneiro, R., Miranda, M., & Guedes, R. M. (2023) · Materials · doi:10.3390/ma16113913 · Cited by 103
“As mentioned, very few studies have been performed regarding PLA mechanical, let alone environmental, fatigue behaviour [159–162], most of which focus on the properties of additive manufacturing specimens [163–173] and some in PLA composites [174,175] and creep behaviour [162,176].”
BackgroundModeling Stented Coronary Arteries: Where We are, Where to Go
Morlacchi, S., & Migliavacca, F. (2012) · Annals of Biomedical Engineering · doi:10.1007/s10439-012-0681-6 · Cited by 97
Yu, Y., Liu, H., Qian, K., Yang, H., McGehee, M., Gu, J., Luo, D., Yao, L., & Zhang, Y. J. (2020) · Computer-Aided Design · doi:10.1016/j.cad.2020.102817 · Cited by 95
“[20] used an incompressible, isotropic neo-Hookean hyperelastic material to describe the mechanical response of stents.”
MethodModeling the response of nonlinear viscoelastic biodegradable polymeric stents
Muliana, A. H., & Rajagopal, K. R. (2012) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2011.12.007 · Cited by 78
Self-citationBiomechanical Challenges to Polymeric Biodegradable Stents
Soares, J. S., & Moore, J. E. (2015) · Annals of Biomedical Engineering · doi:10.1007/s10439-015-1477-2 · Cited by 84
Self-citationDeformation-induced hydrolysis of a degradable polymeric cylindrical annulus
Soares, J. S., Rajagopal, K. R., & Moore, J. E. (2010) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-009-0168-z · Cited by 76
“Phenomenologically derived models of this kind were studied by Soares (2008) and Soares et al. (2008).”
BackgroundMethodInfluentialSelf-citationPolak-Kraśna, K., Abaei, A. R., Shirazi, R. N., Parle, E., Carroll, O., Ronan, W., & Vaughan, T. J. (2021) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2021.104409 · Cited by 74
Constitutive modeling of biodegradable polymers: Hydrolytic degradation and time-dependent behavior
Vieira, A. C., Guedes, R. M., & Tita, V. (2013) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2013.12.010 · Cited by 74
Slavković, V., Hanželič, B., Plesec, V., Milenković, S., & Harih, G. (2024) · Polymers · doi:10.3390/polym16111526 · Cited by 82
“It is used in various applications, including stents [32], orthopedic screws [33], supports for growing various cells, muscle tissue, bone and cartilage regeneration, planting osteogenic stem cells and implantation into bone defects [34], and drug delivery and delivery devices [35].”
BackgroundDebusschere, N., Segers, P., Dubruel, P., Verhegghe, B., & Beule, M. D. (2015) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2015.03.024 · Cited by 65
Computational Bench Testing to Evaluate the Short-Term Mechanical Performance of a Polymeric Stent
Bobel, A. C., Petisco-Ferrero, S., Sarasua, J.-R., Wang, W., & McHugh, P. E. (2015) · Cardiovascular Engineering and Technology · doi:10.1007/s13239-015-0235-9 · Cited by 52
The Effect of Static and Dynamic Loading on Degradation of PLLA Stent Fibers
Hayman, D., Bergerson, C., Miller, S., Moreno, M., & Moore, J. E. (2014) · Journal of Biomechanical Engineering · doi:10.1115/1.4027614 · Cited by 48
Self-citationNano, micro particulate and cosmetic delivery systems of polylactic acid: A mini review
Hajleh, M. N. A., Al-Samydai, A. M., & Al‐Dujaili, E. A. S. (2020) · Journal of Cosmetic Dermatology · doi:10.1111/jocd.13696 · Cited by 50
Degradation Model of Bioabsorbable Cardiovascular Stents
Luo, Q., Liu, X., Li, Z., Huang, C., Zhang, W., Meng, J., Chang, Z., & Hua, Z. (2014) · PLoS ONE · doi:10.1371/journal.pone.0110278 · Cited by 48
“The bioabsorbable material constitutive model was initially developed within the scope of the linearized theory of elasticity [17,18], but was then extended to explain the nonlinear responses of finite deformations.”
MethodModeling of Deformation-Accelerated Breakdown of Polylactic Acid Biodegradable Stents
Soares, J. S., Moore, J. E., & Rajagopal, K. R. (2010) · Journal of Medical Devices · doi:10.1115/1.4002759 · Cited by 49
Self-citationBiodegradable Stents: Biomechanical Modeling Challenges and Opportunities
Moore, J. E., Soares, J. S., & Rajagopal, K. R. (2010) · Cardiovascular Engineering and Technology · doi:10.1007/s13239-010-0005-7 · Cited by 54
Self-citationThe Development of Design and Manufacture Techniques for Bioresorbable Coronary Artery Stents
Wang, L., Li, J., Pang, S., Yan, P., Wang, X., & Qiu, T. (2021) · Micromachines · doi:10.3390/mi12080990 · Cited by 55
“developed this theory, mainly focusing on PLLA stents [70].”
BackgroundEquilibrium configurations and stability of a damaged body under uniaxial tractions
Lanzoni, L., & Tarantino, A. M. (2014) · Zeitschrift für angewandte Mathematik und Physik · doi:10.1007/s00033-014-0397-6 · Cited by 44
Lin, S., Dong, P., Zhou, C., Dallan, L. A. P., Zimin, V. N., Pereira, G. T. R., Lee, J., Gharaibeh, Y., Wilson, D. L., Bezerra, H. G., et al. (2020) · Nanotechnology Reviews · doi:10.1515/ntrev-2020-0093 · Cited by 38
“provided a general degradation model of the PLLA with consideration of its hyperelastic mechanical behavior [14].”
BackgroundMethodInfluentialNaseem, R., Zhao, L., Liu, Y., & Silberschmidt, V. V. (2017) · Mechanics of Advanced Materials and Modern Processes · doi:10.1186/s40759-017-0028-y · Cited by 39
“…modes were proposed in literature to capture complex responses of biodegradable polymers - from their virgin state right through to full degradation (Soares et al. 2008, 2010a, b; Eswaran et al. 2011; Muliana and Rajagopal 2012; Khan and El-Sayed 2013; Vieira et al. 2015; Rosa et al. 2016).”
BackgroundQiu, T., He, R., Abunassar, C., Hossainy, S., & Zhao, L. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.11.031 · Cited by 36
“…and validation of material constitutive models that aim to predict the load-bearing, stress-strain behaviour of degradable polymer or implant (e.g., Soares et al., 2008; Vieira et al., 2011; Luo et al., 2014) or on the simulations of polymer degradation with concurrent drug elution from degradable…”
BackgroundFibrillar Collagen: A Review of the Mechanical Modeling of Strain-Mediated Enzymatic Turnover
Topol, H., Demirkoparan, H., & Pence, T. J. (2021) · Applied Mechanics Reviews · doi:10.1115/1.4052752 · Cited by 39
Equilibrium Paths of a Hyperelastic Body Under Progressive Damage
Tarantino, A. M. (2013) · Journal of Elasticity · doi:10.1007/s10659-013-9439-0 · Cited by 35
Khan, K. A., & El-Sayed, T. (2012) · Acta Mechanica · doi:10.1007/s00707-012-0760-7 · Cited by 34
“[44] followed [38] and developed a phenomenological model for strain-induced degradable materials.”
Effects of external stress on biodegradable orthopedic materials: A review
Li, X., Chu, C., & Chu, P. K.-H. (2016) · Bioactive Materials · doi:10.1016/j.bioactmat.2016.09.002 · Cited by 34
“The model is further developed for PLLA undergoing tensile deformation [94,95].”
MethodA Finite Element Implementation of Knowles Stored-Energy Function: Theory, Coding and Applications
Suchocki, C. (2011) · Archive of Mechanical Engineering · doi:10.2478/v10180-011-0021-7 · Cited by 31
Breche, Q., Chagnon, G., Machado, G., Girard, E., Nottelet, B., Garric, X., & Favier, D. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2016.02.015 · Cited by 30
“It represents the degraded state of the polymer at each material point x and at a given time t (Soares et al., 2008).”
BackgroundYu, Y., Qian, K., Yang, H., Yao, L., & Zhang, Y. J. (2022) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2022.117497 · Cited by 29
“Soares et al. (2008) used an incompressible, isotropic neo-Hookean hyperelastic material to describe the mechanical response of the stents.”
MethodConstitutive modeling for biodegradable polymers for application in endovascular stents
Soares, D. S., & Filipe, J. D. P. D. C. (2008) · Cited by 28
Breche, Q., Chagnon, G., Machado, G. C., Nottelet, B., Garric, X., Girard, É., & Favier, D. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.07.014 · Cited by 34
“It represents the degraded state of the polymer at each material point x and at a given degradation time td [2].”
BackgroundMethodWang, A., Venezuela, J., & Dargusch, M. S. (2022) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2022.107301 · Cited by 31
Najmeddine, A., Xu, Z., Liu, G., Croft, Z. L., Liu, G., Esker, A. R., & Shakiba, M. (2022) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2022.111427 · Cited by 37
Ayoub, G. Y., Rodriguez, A. K., Mansoor, B., & Colin, X. (2020) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2020.08.025 · Cited by 29
Debusschere, N., Segers, P., Dubruel, P., Verhegghe, B., & Beule, M. D. (2015) · Annals of Biomedical Engineering · doi:10.1007/s10439-015-1530-1 · Cited by 29
Research into biodegradable polymeric stents: a review of experimental and modelling work
Qiu, T., & Zhao, L. (2018) · Vessel Plus · doi:10.20517/2574-1209.2018.13 · Cited by 24
Frizziero, L., Santi, G. M., Leon-Cardenas, C., Ferretti, P., Sali, M., Gianese, F., Crescentini, N., Donnici, G., Liverani, A., Trisolino, G., et al. (2021) · Journal of Functional Biomaterials · doi:10.3390/jfb12040063 · Cited by 26
Biomechanical Issues in Endovascular Device Design
Moore, J. E. (2009) · Journal of Endovascular Therapy · doi:10.1583/08-2605.1 · Cited by 22
“Our group has begun to develop material models that can be used for this design challenge, provided that information on time-dependent material properties can be obtained.(45) Bioabsorbable stents are promising technologies for vessels subjected to off-axis forces, since the materials targeted for their construction m…”
BackgroundSelf-citationPhysical and Chemical Stability of PLA in Food Packaging
Gerometta, M., Rocca-Smith, J. R., Domenek, S., & Karbowiak, T. (2019) · Elsevier eBooks · doi:10.1016/b978-0-08-100596-5.22471-2 · Cited by 24
Boland, E. L., Grogan, J. A., & McHugh, P. E. (2017) · Journal of Medical Devices · doi:10.1115/1.4035895 · Cited by 21
Atomistic modeling of water diffusion in hydrolytic biomaterials
Gautieri, A., Mezzanzanica, A., Motta, A., Redealli, A., & Vesentini, S. (2011) · Journal of Molecular Modeling · doi:10.1007/s00894-011-1176-3 · Cited by 19
“Microscale analytical models [11, 27 ], using these data as an input, can then predict the degradation kinetics and thus how mechanical properties or drug release rates change with time.”
MethodMolnár, J., Hertner-Horváth, A., & Menyhárd, A. (2021) · Polymer Testing · doi:10.1016/j.polymertesting.2021.107112 · Cited by 19
Integrated Stent Models Based on Dimension Reduction: Review and Future Perspectives
Zunino, P., Tambača, J., Cutrì, E., Čanić, S., Formaggia, L., & Migliavacca, F. (2015) · Annals of Biomedical Engineering · doi:10.1007/s10439-015-1459-4 · Cited by 19
A model for the stretch-mediated enzymatic degradation of silk fibers
Kluge, J. A., Thurber, A. E., Leisk, G. G., Kaplan, D. L., & Dorfmann, L. (2010) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2010.06.008 · Cited by 20
In vitro and in silico testing of partially and fully bioresorbable vascular scaffold
Filipović, N., Nikolić, D. D., Isailovic, V. M., Milošević, M., Geroski, V., Karanasiou, G. S., Fawdry, M., Flanagan, A., Fotiadis, D. I., & Kojić, M. (2020) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2020.110158 · Cited by 18
“In papers (Soares et al., 2007; 60 Soares et al., 2008; Soares et al., 2010a; Soares et al., 2010b) a description of material properties that include 61 the effects of mechanical deformation in conditions of accelerating biodegradation is proposed.”
BackgroundShine, C. J., McHugh, P. E., & Ronan, W. (2021) · Journal of Elasticity · doi:10.1007/s10659-021-09835-7 · Cited by 21
Anssari-Benam, A., & Saccomandi, G. (2024) · Journal of Biomechanical Engineering · doi:10.1115/1.4065271 · Cited by 19
Applications of viscoelastic clock models in biomechanics
Rajagopal, K. R., & Wineman, A. S. (2010) · Acta Mechanica · doi:10.1007/s00707-009-0262-4 · Cited by 17
“Soares et al. [ 15 ] used such an approach to study the response of biodegradable stents.”
BackgroundSelf-citationHydrolytic degradation of amorphous PLA: Effect of mechanical loads
Chen, H., Pan, Z., Sulley, G. S., Williams, C. K., & Brassart, L. (2025) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2025.111751 · Cited by 22
Design considerations for developing biodegradable and bioabsorbable magnesium implants
Brar, H. S., Keselowsky, B. G., Sarntinoranont, M., & Manuel, M. V. (2011) · JOM · doi:10.1007/s11837-011-0048-8 · Cited by 15
Dasgupta, S., Mondal, S., Ray, S., Singh, Y. P., & Maji, K. (2021) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2021.1916867 · Cited by 14
“The widespread biomedical application of natural and synthetic biodegradable polymers ranging from drug delivery [4,5] to sutures [6], to bio-absorbable prostheses [7], to tissue culture scaffolding [8,9], and stents [10] have attracted significant attention recently.”
BackgroundMakki, M., Ayoub, G. Y., Pannier, C. P., Dargazany, R., Kadri, R., Naït‐Abdelaziz, M., & Nouri, H. (2023) · International Journal of Non-Linear Mechanics · doi:10.1016/j.ijnonlinmec.2023.104456 · Cited by 13
Development of a flow evolution network model for the stress-strain behavior of poly(L-lactide)
Dreher, M. L., Nagaraja, S., Bergstrom, J., & Hayman, D. (2017) · Journal of Biomechanical Engineering · doi:10.1115/1.4037071 · Cited by 12
Dixit, G., Pandey, P. M., Kaur, T., & Singh, N. (2023) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1177/09544119231173826 · Cited by 12
“Additionally, the ability to customize the microstructural, chemical, mechanical, and biodegradation characteristics for particular purposes has sparked a significant and expanding amount of study into the use of these materials in novel contexts.(9) But due to its hydrophobic nature, low degradation rate, biological…”
BackgroundA coupled non-Fickian model of a cardiovascular drug delivery system
Ferreira, J. A., Naghipoor, J., & de Oliveira, P. (2015) · Mathematical Medicine and Biology A Journal of the IMA · doi:10.1093/imammb/dqv023 · Cited by 10
Blair, R. W., Dunne, N., Lennon, A., & Menary, G. (2019) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2019.05.039 · Cited by 10
Niveditha, R., Saranya, R., Vishnu, T., & Chamundeswari, K. (2022) · Materials Today Proceedings · doi:10.1016/j.matpr.2022.03.355 · Cited by 10
Mendoza-Duarte, M. E., Roacho-Pérez, J. A., Quiroz-Reyes, A. G., Garza-Treviño, E. N., Sanchez-Dominguez, C. N., García‐Casillas, P. E., & Vega‐Ríos, A. (2023) · Journal of Polymers and the Environment · doi:10.1007/s10924-023-03019-1 · Cited by 11
“PLA is used in a wide range of biomedical applications, such as stents [5–7], surgical sutures [8, 9], and screws [10], among others.”
Sanjari, S., Saraeian, P., Haghighi, S. E., & Alinia-ziazi, A. (2024) · Journal of Polymers and the Environment · doi:10.1007/s10924-024-03285-7 · Cited by 10
“An internal scalar variable, d(x, t), defines the local state of degradation, and the constitutive model for deformation-induced degradation of polymeric materials has been used [49, 50, 57].”
InfluentialKazemian, M., Hassani, A., & Goudarzi, A. M. (2021) · International Journal of Engineering Science · doi:10.1016/j.ijengsci.2021.103618 · Cited by 9
Milošević, M., Anić, M., Nikolić, D. D., Geroski, V., Miličević, B., Kojić, M., & Filipović, N. (2021) · Frontiers in Medical Technology · doi:10.3389/fmedt.2021.724062 · Cited by 8
Unsteady motions of degrading or aging linearized elastic solids
Darbha, S., & Rajagopal, K. R. (2009) · International Journal of Non-Linear Mechanics · doi:10.1016/j.ijnonlinmec.2008.12.012 · Cited by 8
Self-citationAdditive Manufacturing from a Biomedical Perspective
Pinto, B. M., Marques, M., Ferreira, I., Machado, M., Caldas, G. A. R., Belinha, J., Alves, J. L., & Jorge, R. N. (2019) · IEEE Portuguese Meeting on Bioengineering · doi:10.1109/enbeng.2019.8692538 · Cited by 8
“On the other hand, polymer-based stents were developed, specially using polylactic acid [32-35], which is the material used in this study, due to its advantages previous announced.”
BackgroundMethodWu, J., Gao, X., Huang, Y., Ye, G., Zhang, Y., & Gao, P. P. (2022) · Optics & Laser Technology · doi:10.1016/j.optlastec.2022.108965 · Cited by 7
Modeling in cardiovascular biomechanics
Soares, J. S., Pasta, S., Vorp, D. A., & Moore, J. E. (2010) · International Journal of Engineering Science · doi:10.1016/j.ijengsci.2010.06.006 · Cited by 7
Self-citationInSilc: 3D Reconstruction and plaque characterization tool
Karanasiou, G. S., Rigas, G., Kyriakidis, S., Tachos, N. S., Sakellarios, A. I., & Fotiadis, D. I. (2018) · Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) · doi:10.1109/embc.2018.8513126 · Cited by 7
Singh, A., Guedes, R. M., Paiva, D., & Magalhães, F. D. (2020) · SN Applied Sciences · doi:10.1007/s42452-020-1964-4 · Cited by 11
Yang, X., Zhang, W., Yao, J., Sun, A., Gao, Y., Guo, M., & Fan, Y. (2021) · Computer Methods in Biomechanics & Biomedical Engineering · doi:10.1080/10255842.2021.1931846 · Cited by 6
“…degradation behavior of BDS. Theoretical models and especially finite element method (FEM) have been extensively used for structural analysis and demonstrated to be an efficient tool to analyze the BDS degradation process (Soares et al. 2008; Winzer et al. 2008; Fan et al. 2017; Gao et al. 2019).”
MethodTaguti, M. V. H., Françoso, A., Ribeiro, M. L., & Vieira, A. C. (2020) · Polymer Engineering and Science · doi:10.1002/pen.25402 · Cited by 6
On the response of viscoelastic biodegradable polymeric solids
Muliana, A. H., & Rajagopal, K. R. (2011) · Mechanics Research Communications · doi:10.1016/j.mechrescom.2011.10.004 · Cited by 5
Self-citationAbaei, A. R., Shine, C. J., Vaughan, T. J., & Ronan, W. (2024) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2024.106419 · Cited by 5
Kassab, A., Ayoub, G. Y., Makki, M., Pannier, C. P., & Naït‐Abdelaziz, M. (2025) · International Journal of Non-Linear Mechanics · doi:10.1016/j.ijnonlinmec.2025.105124 · Cited by 4
ALGUNAS APLICACIONES DEL ÁCIDO POLI-L-LÁCTICO
Zuluaga, F. (2023) · Revista de la Academia Colombiana de Ciencias Exactas Físicas y Naturales · doi:10.18257/raccefyn.37(142).2013.2539 · Cited by 22
Milošević, M., Anić, M., Nikolić, D. D., Miličević, B., Kojić, M., & Filipović, N. (2022) · Computational and Mathematical Methods in Medicine · doi:10.1155/2022/5311208 · Cited by 4
A study on an incompressible polymeric pressurized vessel subjected to bulk degradation
Kazemian, M., Goudarzi, A. M., & Hassani, A. (2021) · Mathematics and Mechanics of Solids · doi:10.1177/10812865211033634 · Cited by 4
“One of the most important approaches to this is to provide a suitable thermodynamic framework to predict how to save and dissipate mechanical energy and, accordingly, a degradation parameter is introduced to describe the decrease in the mechanical integrity of the material [7,12,13].”
BackgroundEXPERIMENTAL AND FINITE ELEMENT ANALYSIS OF SOLVENT CAST POLY(LACTIC ACID) THIN FILM BLENDS
Shaharuddin, S. I. S., Mukhtar, A. R., Akhir, N. A. M., Shaffiar, N. M., & Othman, M. (2019) · IIUM Engineering Journal · doi:10.31436/iiumej.v20i2.1119 · Cited by 3
“FEA has been used not only to model the mechanical properties [29,30] but also degradation performances [31,32] of various materials.”
MethodSu, J., Cheng, J., Zhao, G., Hu, X. F., & Tao, J. (2022) · Journal of Physics Conference Series · doi:10.1088/1742-6596/2256/1/012027 · Cited by 3
Coupled ductile–hydrolytic damage model based on variational constitutive updates
de Castro, P. B., & Fancello, E. A. (2017) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2017.05.023 · Cited by 3
Kischkel, S., Bünger, C. M., Grabow, N., Erdle, B., Kabelitz, M., Moreth, F., Martin, D. P., Williams, S. F., Reske, T., Schmitz, K., et al. (2021) · Annals of Vascular Surgery · doi:10.1016/j.avsg.2021.10.001 · Cited by 3
Simulation of stent mechanical testing
Nikolić, D. D., & Filipović, N. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-823956-8.00003-1 · Cited by 3
Jena, S., Kirti, A., Mayur, A., Sinha, A., Öz, T., Kujawska, M., & Verma, S. K. (2025) · Next research. · doi:10.1016/j.nexres.2025.101266 · Cited by 3
Simple extension of Lemaitre's elastoplastic damage model to account for hydrolytic degradation
Fancello, E. A., Lindenmeyer, L. P., Roesler, C. R. D. M., & Salmoria, G. V. (2014) · Latin American Journal of Solids and Structures · doi:10.1590/s1679-78252014000500010 · Cited by 2
World's first bio-degradable actuator for removal-free implantable MEMS
Satō, H., Inoue, Y., Ikeuchi, M., & Ikuta, K. (2017) · IEEE International Conference on Micro Electro Mechanical Systems (MEMS) · doi:10.1109/memsys.2017.7863468 · Cited by 2
“Poly(lactic acid) (PLA) is the most widely produced bio-degradable polymer and used for a wide range of medical devices due to its bio-compatible nature [4].”
BackgroundKazemian, M., Goudarzi, A. M., & Hassani, A. (2021) · Mathematics and Mechanics of Solids · doi:10.1177/10812865211042924 · Cited by 2
Yin, R., Lan, H.-Q., & Liu, J. (2026) · European Journal of Mechanics - A/Solids · doi:10.1016/j.euromechsol.2026.106032 · Cited by 1
Pan, Z., Chen, H., & Brassart, L. (2026) · International Journal of Plasticity · doi:10.1016/j.ijplas.2026.104690 · Cited by 3
Use Case: In Silico Tests of Drug-Eluting Bioresorbable Stents for Coronary Artery
Milošević, M., & Filipović, N. (2024) · Springer eBooks · doi:10.1007/978-3-031-60044-9_8 · Cited by 1
Soares, S., Zunino, P., & Brioschi, F. (2009) · Cited by 1
Vorkapić, M. D., Ivanov, T. D., Baltić, M., Kreculj, D. D., Tanović, D., & Kovacevic, A. M. (2020) · Tehnika · doi:10.5937/tehnika2002179v · Cited by 1
Thatcher, G. L. (2012) · Advances in polymeric biomaterials series/Advances in polymeric biomaterials · doi:10.1201/b11853-6 · Cited by 1
ON A DUCTILE-CHEMICAL DAMAGE MODEL FOR BIOABSORBABLE POLYMERIC MATERIALS
de Castro, P. B., & Fancello, E. A. (2017) · International Symposium on Solid Mechanics (MecSol) · doi:10.26678/abcm.mecsol2017.msl17-0057
Yu, Y., Liu, H., Qian, K., Yang, H., McGehee, M., Gu, J., Luo, D., Yao, L., & Zhang, Y. J. (2019)
Computational modelling of the degradation of poly-L-lactide for a bioresorbable polymeric stent
Shine, C. J. (2020) · Arrow@dit (Dublin Institute of Technology) · doi:10.13025/16196 · Cited by 1
Moreno-Gomez, I. (2019) · Springer theses · doi:10.1007/978-3-030-04990-4_2
Thatcher, G. L. (2017) · CRC Press eBooks · doi:10.1081/e-ebppc-120052172
Thatcher, G. L. (2016) · Taylor & Francis eBooks · doi:10.1081/e-ebpp-120052172
Metadata
- Authors
- Soares, J. S., Moore, J. E., & Rajagopal, K. R.
- Affiliations
- Texas A&M University (US)
- Corresponding author
- Soares, João S.
- Rajagopal, Kumbakonan R.
- Venue
- ASAIO Journal
- Published
- 2008-05
- Volume
- 54
- Issue
- 3
- Pages
- 295-301
- ISSN
- 1058-2916 (ISSN-L)
- OpenAlex
- W2083560529
- Cited by
- 106
- References
- 36
- Citations by year
- 2026: 3 · 2025: 5 · 2024: 5 · 2023: 6 · 2022: 10 · 2021: 13 · 2020: 9 · 2019: 6 · 2018: 2 · 2017: 9 · 2016: 6 · 2015: 8 · 2014: 4 · 2013: 2 · 2012: 4
- FWCI
- 3.09
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- ASAIO Journal (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Fundação para a Ciência e a Tecnologia
- National Institute of Biomedical Imaging and Bioengineering (R01EB000115)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › Elasticity and Material Modeling
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Health Sciences › Medicine › Surgery › Surgical Sutures and Adhesives
- Keywords
- biodegradable polymers, biodegradable stents, constitutive modeling, molecular weight reduction, softening, stress relaxation, creep, hysteresis, neo-Hookean elasticity, arterial stenosis, cyclic loading
- MeSH terms
- Arterial Occlusive Diseases, Biomedical Engineering, Constriction, Pathologic, Humans, Models, Biological, Models, Cardiovascular, Polymers, Molecular Structure, Stents, Absorbable Implants
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.