The DOI matches its Crossref record.
The wear of metals under unlubricated conditions
Abstract
The wear of a wide range of material combinations has been studied in unlubricated conditions. Loads of 50 g to 10 Kg and speeds of 2 to 660 cm/s have been used. A representative selection of the results is given. As a broad classification two contrasting mechanisms of wear have been observed. In nearly all experiments, and for all types of wear mechanism, once equilibrium surface conditions are established the wear rate is independent of the apparent area of contact. The wear rate is accurately proportional to the load for only a limited number of combinations but there are many other examples for which the relation between wear rate and load shows only a small deviation from direct proportionality. It is suggested that with the same surface conditions the wear rate is proportional to the load; in practice this simple relation is modified because the surface conditions depend on the load. These rules of wear may be derived, on a priori grounds, from the experimental results, or from more detailed theoretical calculations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
State-of-The-Art Cooling and Lubrication for Machining Inconel 718
De Bartolomeis, A., Newman, S. T., Biermann, D., & Shokrani, A. (2021) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4047842 · Cited by 43
Metadata
- Authors
- Archard, J. F., & Hirst, W.
- Venue
- Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences
- Publisher
- The Royal Society
- Published
- 1956-08-02
- Volume
- 236
- Issue
- 1206
- Pages
- 397-410
- ISSN
- 0080-4630 (ISSN-L)
- 2053-9169
- OpenAlex
- W1989106596
- Cited by
- 1,100
- References
- 0
- FWCI
- 22.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The wear of metals under unlubricated conditions. https://app.cochat.ai/papers/10.1098/rspa.1956.0144
- The paper
- Archard, J. F., & Hirst, W. (1956). The wear of metals under unlubricated conditions. Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences. https://doi.org/10.1098/rspa.1956.0144
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.