The elasto-hydrodynamic lubrication of rollers
The DOI matches its Crossref record.
Abstract
Gears rollers frequently operate at loads sufficient to deform them appreciably and to enhance the viscosity of the lubricating oil in the region of closest contact. No rigorous theory of this state of lubrication has been available hitherto. In this paper an iterative procedure is developed and has been followed with a digital computer. The calculations yield the oil film thickness, the pressure distribution and the shape of the deformed system. Solutions are given showing the effect of load and speed; the influence of the pressure coefficient of viscosity of the oil, and of the elasticity of the rollers is also shown. The main feature of the results is the prediction of peaks of pressure on the outlet side of the system, the height of the peaks depending greatly upon the foregoing variables. The theory is compared with the available experimental evidence and though it is a clear improvement upon earlier theories, significant differences between theory and experiment yet remain. The origin of these differences is discussed and it is concluded that there is greater need at the present time for fuller experimental evidence than for further elaborations in the theory.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Regimes of Elastohydrodynamic Lubrication
Johnson, K. L. (1970) · Journal of Mechanical Engineering Science · doi:10.1243/jmes_jour_1970_012_004_02 · Cited by 197
A Refined Solution to the Thermal-Elastohydrodynamic Lubrication of Rolling and Sliding Cylinders
Cheng, H. S. (1965) · A S L E Transactions · doi:10.1080/05698196508972110 · Cited by 174
Elasto-hydrodynamic lubrication: A survey of isothermal solutions
Dowson, D., Higginson, G. R., & Whitaker, A. V. (1962) · Journal of Mechanical Engineering Science · doi:10.1243/jmes_jour_1962_004_018_02 · Cited by 157
Dowson, D. (1967) · Proceedings of the Institution of Mechanical Engineers, Conference Proceedings · doi:10.1243/pime_conf_1967_182_014_02 · Cited by 63
Metadata
- Authors
- Archard, G. D., Gair, F. C., & Hirst, W.
- Venue
- Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences
- Publisher
- The Royal Society
- Published
- 1961-06-13
- Volume
- 262
- Issue
- 1308
- Pages
- 51-72
- ISSN
- 0080-4630 (ISSN-L)
- 2053-9169
- OpenAlex
- W2144898908
- Cited by
- 51
- References
- 0
- FWCI
- 16.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.