The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Partial cone crack formation in a brittle material loaded with a sliding spherical indenter
Abstract
In the preceding paper Frank & Lawn (1967) investigated theoretically the development of a cone crack in the strongly inhomogeneous Hertzian stress field. The analysis outlined in that paper is now extended to incorporate a sliding motion of the spherical indenter across the specimen surface, assuming a uniform coefficient of friction over the contact area. Sliding is found to have a large influence on the quasistatic stress field in the loaded specimen, and this in turn affects the ultimate geometry of the cracks. The precise shape of the partially developed cones thus formed is a function only of the Poisson ratio of the specimen material and the coefficient of friction. Criteria determining when surface fracture will occur, expressed as relationships between the critical normal load Pc acting on the specimen and the indenter radius r, are calculated as before. The Auerbach law found for purely normally loaded specimens, namely that Pc is proportional to r, over a certain range of r, should cease to hold when the coefficient of friction exceeds about 0.02. Pc then becomes very nearly proportional to r2, which corresponds to a critical stress criterion. The effect of sliding on the value of Pc becomes large with larger values of the coefficient of friction; this is of particular relevance to studies of the surface damage of brittle materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The structure of abraded glass surfaces
Preston, F. W. (1922) · Transactions of the Optical Society · doi:10.1088/1475-4878/23/3/301 · Cited by 144
Cited by
Indentation fracture: principles and applications
Lawn, B., & Wilshaw, R. (1975) · Journal of Materials Science · doi:10.1007/bf00823224 · Cited by 1,321
Self-citationThe Mechanics of Earthquakes and Faulting
Scholz, C. H. (2019) · Cambridge University Press eBooks · doi:10.1017/9781316681473 · Cited by 910
Malzbender, J., den Toonder, J. M. J., Balkenende, A. R., & de With, G. (2002) · Materials Science and Engineering: R: Reports · doi:10.1016/s0927-796x(01)00040-7 · Cited by 322
Sub-surface mechanical damage distributions during grinding of fused silica
Suratwala, T., Wong, L., Miller, P., Feit, M. D., Menapace, J., Steele, R., Davis, P., & Walmer, D. (2006) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2006.09.012 · Cited by 302
Mechanisms and causes of wear in tooth enamel: implications for hominin diets
Lucas, P. W., Omar, R., Al-Fadhalah, K., Almusallam, A. S., Henry, A. G., Michael, S., Thai, L. A., Watzke, J., Strait, D. S., & Atkins, A. G. (2013) · Journal of The Royal Society Interface · doi:10.1098/rsif.2012.0923 · Cited by 299
Metadata
- Authors
- Lawn, B. R.
- Venue
- Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences
- Publisher
- The Royal Society
- Published
- 1967-07-11
- Volume
- 299
- Issue
- 1458
- Pages
- 307-316
- ISSN
- 0080-4630 (ISSN-L)
- 2053-9169
- OpenAlex
- W2118270548
- Cited by
- 237
- References
- 1
- FWCI
- 4.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Partial cone crack formation in a brittle material loaded with a sliding spherical indenter. https://app.cochat.ai/papers/10.1098/rspa.1967.0138
- The paper
- Lawn, B. R. (1967). Partial cone crack formation in a brittle material loaded with a sliding spherical indenter. Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences. https://doi.org/10.1098/rspa.1967.0138
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.