The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
Strategies for guided-wave structural health monitoring
Abstract
Structural health monitoring (SHM) using guided waves is one of the only ways in which damage anywhere in a structure can be detected using a sparse array of permanently attached sensors. To distinguish damage from structural features, some form of comparison with damage-free reference data is essential, and here subtraction is considered. The detectability of damage is determined by the amplitude of residual signals from structural features remaining after the subtraction of reference data. These are non-zero due to changing environmental conditions such as temperature. In this paper, the amplitude of the residual signals is quantified for different guided-wave SHM strategies. Comparisons are made between two methods of reference signal subtraction and between two candidate sensor configurations. These studies allow estimates to be made of the number of sensors required per unit area to reliably detect a prescribed type of damage. It is shown that the number required is prohibitively high, even in the presence of modest temperature fluctuations, hence some form of temperature compensation is absolutely essential for guided-wave SHM systems to be viable. A potential solution is examined and shown to provide an improvement in signal suppression of approximately 30 dB, which corresponds to two orders of magnitude reduction in the number of sensors required.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An introduction to structural health monitoring
Farrar, C. R., & Worden, K. (2007) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2006.1928 · Cited by 2,628
Modal Testing: Theory and Practice
Ewins, D. J., & Saunders, H. (1986) · Journal of Vibration and Acoustics · doi:10.1115/1.3269294 · Cited by 2,507
Matrix techniques for modeling ultrasonic waves in multilayered media
Lowe, M. J. S. (1995) · IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control · doi:10.1109/58.393096 · Cited by 1,029
The interaction of Lamb waves with defects
Alleyne, D. N., & Cawley, P. (1992) · IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control · doi:10.1109/58.143172 · Cited by 997
Vibration–based structural damage identification
Farrar, C. R., Doebling, S. W., & Nix, D. A. (2001) · Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2000.0717 · Cited by 865
A hollow fibre reinforced polymer composite encompassing self-healing and enhanced damage visibility
Pang, J. W. C., & Bond, I. P. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.03.008 · Cited by 746
The fundamental axioms of structural health monitoring
Worden, K., Farrar, C. R., Manson, G., & Park, G. (2007) · Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.2007.1834 · Cited by 522
Handbook of Nondestructive Evaluation 4.0
Aigner, J., Jacob, G., Wilken, A., et al. (2021) · Springer eBooks · doi:10.1007/978-3-030-48200-8 · Cited by 426
A rapid signal processing technique to remove the effect of dispersion from guided wave signals
Wilcox, P. D. (2003) · IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control · doi:10.1109/tuffc.2003.1197965 · Cited by 400
Self-citationLu, Y., & Michaels, J. E. (2005) · Ultrasonics · doi:10.1016/j.ultras.2005.05.001 · Cited by 395
Biomimetic self-healing of advanced composite structures using hollow glass fibres
Trask, R. S., & Bond, I. P. (2006) · Smart Materials and Structures · doi:10.1088/0964-1726/15/3/005 · Cited by 382
Fundamental Axioms of Structural Health Monitoring
(2012) · Structural Health Monitoring · doi:10.1002/9781118443118.ch13 · Cited by 351
The temperature stability of guided wave structural health monitoring systems
Konstantinidis, G., Drinkwater, B. W., & Wilcox, P. D. (2006) · Smart Materials and Structures · doi:10.1088/0964-1726/15/4/010 · Cited by 263
Self-citation‘Bleeding composites’—damage detection and self-repair using a biomimetic approach
PANG, J., & BOND, I. (2005) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(04)00166-6 · Cited by 260
Next generation structural health monitoring and its integration into aircraft design
Boller, C. (2000) · International Journal of Systems Science · doi:10.1080/00207720050197730 · Cited by 201
Global crack detection using bispectral analysis
Hillis, A. J., Neild, S. A., Drinkwater, B. W., & Wilcox, P. D. (2006) · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rspa.2005.1620 · Cited by 82
Self-citationA hybrid piezoelectric/fiber optic diagnostic system for structural health monitoring
Qing, X., Kumar, A., Zhang, C., Gonzalez, I. F., Guo, G., & Chang, F. (2005) · Smart Materials and Structures · doi:10.1088/0964-1726/14/3/012 · Cited by 80
Cited by
Bonded repair of composite aircraft structures: A review of scientific challenges and opportunities
Katnam, K. B., Da Silva, L. F. M., & Young, T. M. (2013) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2013.03.003 · Cited by 610
Structural health monitoring: Closing the gap between research and industrial deployment
Cawley, P. (2018) · Structural Health Monitoring · doi:10.1177/1475921717750047 · Cited by 423
Optimization of sensor placement for structural health monitoring: a review
Ostachowicz, W., Soman, R., & Malinowski, P. (2019) · Structural Health Monitoring · doi:10.1177/1475921719825601 · Cited by 388
Efficient temperature compensation strategies for guided wave structural health monitoring
Croxford, A. J., Moll, J., Wilcox, P. D., & Michaels, J. E. (2010) · Ultrasonics · doi:10.1016/j.ultras.2009.11.002 · Cited by 371
Self-citationStructural Health Monitoring for Advanced Composite Structures: A Review
Güemes, A., Fernandez-Lopez, A., Pozo, A. R., & Sierra-Pérez, J. (2020) · Journal of Composites Science · doi:10.3390/jcs4010013 · Cited by 298
Metadata
- Authors
- Croxford, A. J., Wilcox, P. D., Drinkwater, B. W., & Konstantinidis, G.
- Venue
- Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences
- Publisher
- The Royal Society
- Published
- 2007-08-28
- Volume
- 463
- Issue
- 2087
- Pages
- 2961-2981
- ISSN
- 1364-5021 (ISSN-L)
- 1471-2946
- OpenAlex
- W2127165121
- Cited by
- 369
- References
- 17
- FWCI
- 18.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.