Large elastic deformations of isotropic materials VI. Further results in the theory of torsion, shear and flexure
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
The forces necessary to produce certain simple types of deformation in a tube of incompressible, highly elastic material, isotropic in its undeformed state, are discussed. The first type of deformation may be considered to be produced by the following three successive simpler deformations: (i) a uniform simple extension, (ii) a uniform inflation of the tube, in which its length remains constant, and (iii) a uniform simple torsion, in which planes perpendicular to the axis of the tube are rotated in their own plane through an angle proportional to their distance from one end of the tube. Certain special cases of this deformation are considered in greater detail employing a simple stored-energy function of the form lf=C'1(/1-3)+C2(/2-3), where Cx and C2 are physical constants for the material and Ix and /2 are the strain invariants. The second type of deformation considered is that in which the simpler deformations (i) and (ii) mentioned above are followed successively by simple shears about the axis of the tube and parallel to it. The forces which must be applied are calculated for the simple form of stored-energy function given above. Finally, the simultaneous simple flexure and uniform extension normal to the plane of flexure of a thick sheet is discussed, and a number of the results obtained in a previous paper (Rivlin 19496) are generalized.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Theory of Large Elastic Deformation
Mooney, M. (1940) · Journal of Applied Physics · doi:10.1063/1.1712836 · Cited by 3,580
Large elastic deformations of isotropic materials IV. further developments of the general theory
Rivlin, R. S. (1948) · Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences · doi:10.1098/rsta.1948.0024 · Cited by 1,882
Self-citationLarge elastic deformations of isotropic materials. I. Fundamental concepts
Rivlin, R. S. (1948) · Philosophical Transactions of the Royal Society of London Series A Mathematical and Physical Sciences · doi:10.1098/rsta.1948.0002 · Cited by 725
Self-citation
Cited by
The Mechanical Foundations of Elasticity and Fluid Dynamics
Truesdell, C. (1952) · Indiana University Mathematics Journal · doi:10.1512/iumj.1952.1.51005 · Cited by 449
Steinmann, P., Hossain, M., & Possart, G. (2012) · Archive of Applied Mechanics · doi:10.1007/s00419-012-0610-z · Cited by 432
The tube model theory of rubber elasticity
Edwards, S. F., & Vilgis, T. A. (1988) · Reports on Progress in Physics · doi:10.1088/0034-4885/51/2/003 · Cited by 384
The elasticity and related properties of rubbers
Treloar, L. R. G. (1973) · Reports on Progress in Physics · doi:10.1088/0034-4885/36/7/001 · Cited by 266
Metadata
- Authors
- Rivlin, R. S.
- Venue
- Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences
- Publisher
- The Royal Society
- Published
- 1949-12-30
- Volume
- 242
- Issue
- 845
- Pages
- 173-195
- ISSN
- 0080-4614 (ISSN-L)
- 2054-0272
- OpenAlex
- W2117802315
- Cited by
- 426
- References
- 3
- FWCI
- 9.06
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.