CoChat

The lubrication of rollers II. Film thickness with relation to viscosity and speed

Crook, A. W. · 1961 · Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences
Cited by 121

The DOI matches its Crossref record.

Abstract

Systematic measurements with a disk machine of the thickness of the hydrodynamic oil film between loaded rollers have been made with respect to load, rolling speed, sliding speed and oil viscosity. It has been found that the viscosity of greatest im portance with respect to film thickness is the viscosity of the oil at the surface temperature of the disks (tjs) ; the viscosity of the oil supplied by the lubricating jet and the viscosity attained by the oil on its passage through the pressure zone are unim portant. It has been shown that film thickness is independent of load at loads exceeding 7 x 107dyn cm-1, but is dependent upon the rolling speed u (the mean peripheral speed of the disks) as well as upon rjs. To within +15 % all the results are expressed by h* = 0-8[(m^ ) /100]0.5 where h% is the film thickness in microns when utjs is expressed in dyncm-1. Particularly is it noteworthy that this same expression remained true even when sliding was introduced. (The ranges of conditions covered by the experiments were loads from 7 x 107 to 2 x 108dyncm -1, rolling speeds from 32 to 1000 cm s-1, sliding speeds up to 480 cm s-1 and values of rjs from 0.14 to 1.19P.) It is also shown that an implication of the insensitivity to sliding is that on the entry side there is little frictional heating of the oil due to the sliding up to a point where the pressure approaches 1 x 109 dyncm-2. The experimental results, have been compared with the theory of the elastohydrodynamic lubrication at the conjunction of the disks. The theory disregards frictional heating and predicts a film thickness proportional to (zb/s)0.7 in contrast with the exponent of 0.5 given by experiment. Evidence is cited that the difference is not due to frictional heat but it is suggested that the discrepancy is due to a specific effect of speed upon the increase in viscosity which oils exhibit under pressure.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1098/rsta.1961.0015

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Metadata

Authors
Crook, A. W.
Venue
Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences
Published
1961-12-21
Volume
254
Issue
1040
Pages
223-236
ISSN
  • 0080-4614 (ISSN-L)
  • 2054-0272
OpenAlex
W2010583070
Cited by
121
References
0
FWCI
12.54
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: The lubrication of rollers II. Film thickness with relation to viscosity and speed. https://app.cochat.ai/papers/10.1098/rsta.1961.0015
The paper
Crook, A. W. (1961). The lubrication of rollers II. Film thickness with relation to viscosity and speed. Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences. https://doi.org/10.1098/rsta.1961.0015

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.