The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
The relation between porosity, microstructure and strength, and the approach to advanced cement-based materials
Abstract
A theory is formulated to connect the strength of cement paste with its porosity. The theory shows that bending strength is largely dictated by the length of the largest pores, as in the Griffith (1920) model, but there is also an influence of the volume of porosity, which affects toughness through changing elastic modulus and fracture energy. Verification of this theory was achieved by observing the large pores in cement, and then relating bending strength to the measured defect length, modulus and fracture energy. The argument was proved by developing processes to remove the large pores from cement pastes, thereby raising the bending strength to 70 MPa. Further removal of colloidal pores gave a bending strength of 150 MPa and compression strength up to 300 MPa with improved toughness. Re-introduction of controlled pores into these macro-defect-free (mdf) cements allowed Feret’s law (1897) to be explained.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
VI. The phenomena of rupture and flow in solids
Griffith, A. A. (1921) · Philosophical Transactions of the Royal Society of London. Series A, Containing Papers of a Mathematical or Physical Character · doi:10.1098/rsta.1921.0006 · Cited by 11,052
Cited by
Molecular tectonics in biomineralization and biomimetic materials chemistry
Mann, S. (1993) · Nature · doi:10.1038/365499a0 · Cited by 1,165
Influence of porosity on compressive and tensile strength of cement mortar
Chen, X., Wu, S., & Zhou, J. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.11.072 · Cited by 768
The relationship between porosity and strength for porous concrete
Lian, C., Zhuge, Y., & Beecham, S. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.05.005 · Cited by 683
Innovative Materials Processing Strategies: a Biomimetic Approach
Heuer, A. H., Fink, D. J., Laraia, V. J., Arias, J. L., Calvert, P. D., Kendall, K., Messing, G. L., Blackwell, J., Rieke, P. C., Thompson, D. H., et al. (1992) · Science · doi:10.1126/science.1546311 · Cited by 543
Self-citationKunther, W., Ferreiro, S., & Skibsted, J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta06104h · Cited by 440
Metadata
- Authors
- Kendall, K., Howard, A. J., & Birchall, J. D.
- Venue
- Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences
- Publisher
- The Royal Society
- Published
- 1983-09-24
- Volume
- 310
- Issue
- 1511
- Pages
- 139-153
- ISSN
- 0080-4614 (ISSN-L)
- 2054-0272
- OpenAlex
- W2162249337
- Cited by
- 236
- References
- 1
- FWCI
- 48.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.