The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Multifunctional periodic cellular metals
Abstract
Periodic cellular metals with honeycomb and corrugated topologies are widely used for the cores of light weight sandwich panel structures. Honeycombs have closed cell pores and are well suited for thermal protection while also providing efficient load support. Corrugated core structures provide less efficient and highly anisotropic load support, but enable cross flow heat exchange opportunities because their pores are continuous in one direction. Recent advances in topology design and fabrication have led to the emergence of lattice truss structures with open cell structures. These three classes of periodic cellular metals can now be fabricated from a wide variety of structural alloys. Many topologies are found to provide adequate stiffness and strength for structural load support when configured as the cores of sandwich panels. Sandwich panels with core relative densities of 2–10% and cell sizes in the millimetre range are being assessed for use as multifunctional structures. The open, three-dimensional interconnected pore networks of lattice truss topologies provide opportunities for simultaneously supporting high stresses while also enabling cross flow heat exchange. These highly compressible structures also provide opportunities for the mitigation of high intensity dynamic loads created by impacts and shock waves in air or water. By filling the voids with polymers and hard ceramics, these structures have also been found to offer significant resistance to penetration by projectiles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ashby, M., Evans, A., Fleck, N., Gibson, L., Hutchinson, J., Wadley, H., & Delale, F. (2001) · Applied Mechanics Reviews · doi:10.1115/1.1421119 · Cited by 2,694
Self-citationEffective properties of the octet-truss lattice material
Deshpande, V. S., Fleck, N. A., & Ashby, M. F. (2001) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(01)00010-2 · Cited by 1,741
Foam topology: bending versus stretching dominated architectures
Deshpande, V. S., Ashby, M. F., & Fleck, N. A. (2001) · Acta Materialia · doi:10.1016/s1359-6454(00)00379-7 · Cited by 1,623
Thermophysical properties of high porosity metal foams
Bhattacharya, A., Calmidi, V. V., & Mahajan, R. L. (2002) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(01)00220-4 · Cited by 1,233
The topological design of multifunctional cellular metals
Evans, A. G., Hutchinson, J. W., Fleck, N. A., Ashby, M. F., & Wadley, H. N. G. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(00)00016-5 · Cited by 1,134
Self-citationOn the effective thermal conductivity of a three-dimensionally structured fluid-saturated metal foam
Boomsma, K., & Poulikakos, D. (2001) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(00)00123-x · Cited by 831
Fabrication and structural performance of periodic cellular metal sandwich structures
Wadley, H. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00266-5 · Cited by 800
Self-citationMultifunctionality of cellular metal systems
Evans, A. G. (1998) · Progress in Materials Science · doi:10.1016/s0079-6425(98)00004-8 · Cited by 695
Collapse of truss core sandwich beams in 3-point bending
Deshpande, V. S., & Fleck, N. A. (2001) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(01)00103-2 · Cited by 532
Baker, W. E. (1973) · Cited by 397
Compressive behavior of age hardenable tetrahedral lattice truss structures made from aluminium
KOOISTRA, G. (2004) · Acta Materialia · doi:10.1016/j.actamat.2004.05.039 · Cited by 375
Wicks, N., & Hutchinson, J. W. (2001) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(00)00315-2 · Cited by 360
Mechanical behavior of a three-dimensional truss material
Wallach, J., & Gibson, L. J. (2001) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(00)00400-5 · Cited by 333
Non-Darcy natural convection in high porosity metal foams
Phanikumar, M. S., & Mahajan, R. L. (2002) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(02)00089-3 · Cited by 329
Cellular metal lattices with hollow trusses
Queheillalt, D. T., & Wadley, H. N. G. (2005) · Acta Materialia · doi:10.1016/j.actamat.2004.09.024 · Cited by 323
Self-citationThe effects of topology upon fluid-flow and heat-transfer within cellular copper structures
Tian, J., Kim, T., Lu, T. J., Hodson, H. P., Queheillalt, D. T., Sypeck, D. J., & Wadley, H. N. G. (2004) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2004.02.010 · Cited by 318
Self-citationThe structural performance of near-optimized truss core panels
Chiras, S., Mumm, D. R., Evans, A. G., Wicks, N., Hutchinson, J. W., Dharmasena, K. P., Wadley, H. N. G., & Fichter, S. (2002) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(02)00241-x · Cited by 307
Self-citationOn the performance of truss panels with Kagomé cores
Wang, J., Evans, A. G., Dharmasena, K., & Wadley, H. N. G. (2003) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(03)00349-4 · Cited by 288
Self-citationZok, F. W., Waltner, S. A., Wei, Z., Rathbun, H. J., McMeeking, R. M., & Evans, A. G. (2004) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2004.05.045 · Cited by 275
The compressive and shear responses of corrugated and diamond lattice materials
Côté, F., Deshpande, V. S., Fleck, N. A., & Evans, A. G. (2005) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2005.07.045 · Cited by 273
Active cooling by metallic sandwich structures with periodic cores
LU, T., VALDEVIT, L., & EVANS, A. (2005) · Progress in Materials Science · doi:10.1016/j.pmatsci.2005.03.001 · Cited by 243
Gu, S., Lu, T. J., & Evans, A. G. (2001) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(00)00234-9 · Cited by 222
Pyramidal lattice truss structures with hollow trusses
Queheillalt, D. T., & Wadley, H. N. G. (2005) · Materials Science and Engineering A · doi:10.1016/j.msea.2005.02.048 · Cited by 218
Self-citationComputational aspects of effective thermal conductivity of highly porous metal foams
Singh, R., & Kasana, H. S. (2004) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2003.12.011 · Cited by 206
Performance of metallic honeycomb-core sandwich beams under shock loading
Rathbun, H. J., Radford, D. D., Xue, Z., He, M. Y., Yang, J., Deshpande, V., Fleck, N. A., Hutchinson, J. W., Zok, F. W., & Evans, A. G. (2006) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2005.06.079 · Cited by 203
Simulated properties of Kagomé and tetragonal truss core panels
Hyun, S., Karlsson, A. M., Salvatore Torquato, A., & Evans, A. G. (2003) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(03)00350-0 · Cited by 203
Heat transfer efficiency of metal honeycombs
Lu, T. J. (1999) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(98)00306-8 · Cited by 201
Cellular Metal Truss Core Sandwich Structures
Sypeck, D. J., & Wadley, H. N. G. (2002) · Advanced Engineering Materials · doi:10.1002/1527-2648(20021014)4:10<759::aid-adem759>3.0.co;2-a · Cited by 180
Self-citationStructurally optimized sandwich panels with prismatic cores
Valdevit, L., Hutchinson, J. W., & Evans, A. G. (2004) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2004.04.027 · Cited by 167
Performance of sandwich plates with truss cores
Wicks, N., & Hutchinson, J. W. (2003) · Mechanics of Materials · doi:10.1016/j.mechmat.2003.05.003 · Cited by 141
Rathbun, H. J., Wei, Z., He, M. Y., Zok, F. W., Evans, A. G., Sypeck, D. J., & Wadley, H. N. G. (2004) · Journal of Applied Mechanics · doi:10.1115/1.1757487 · Cited by 98
Self-citationTronconi, E., Groppi, G., Boger, T., & Heibel, A. K. (2004) · Chemical Engineering Science · doi:10.1016/j.ces.2004.07.018 · Cited by 93
Heat transfer in conductive monolith structures
Boger, T., & Heibel, A. K. (2005) · Chemical Engineering Science · doi:10.1016/j.ces.2004.11.031 · Cited by 93
The out-of-plane compressive behaviour of woven-core sandwich plates
Zupan, M., Deshpande, V. S., & Fleck, N. A. (2004) · European Journal of Mechanics - A/Solids · doi:10.1016/j.euromechsol.2004.01.007 · Cited by 92
Heat sink applications of extruded metal honeycombs
Dempsey, B. M., Eisele, S., & McDowell, D. L. (2004) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2004.09.013 · Cited by 59
Measurement of thermal contact resistance of aluminum honeycombs
Yeh, C. L., Chen, Y., Wen, C., & Li, K. T. (2003) · Experimental Thermal and Fluid Science · doi:10.1016/s0894-1777(02)00297-2 · Cited by 32
Cited by
3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Mechanical metamaterials at the theoretical limit of isotropic elastic stiffness
Berger, J. B., Wadley, H. N. G., & McMeeking, R. M. (2017) · Nature · doi:10.1038/nature21075 · Cited by 914
Self-citationBioinspired engineering of honeycomb structure – Using nature to inspire human innovation
Zhang, Q., Yang, X., Li, P., Huang, G., Feng, S., Shen, C., Han, B., Zhang, X., Jin, F., Xu, F., et al. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.05.001 · Cited by 836
Architected Cellular Materials
Schaedler, T. A., & Carter, W. B. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031624 · Cited by 786
Resilient 3D hierarchical architected metamaterials
Meza, L. R., Zelhofer, A. J., Clarke, N., Mateos, A. J., Kochmann, D. M., & Greer, J. R. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1509120112 · Cited by 706
Metadata
- Authors
- Wadley, H. N. G.
- Venue
- Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
- Publisher
- The Royal Society
- Published
- 2005-12-02
- Volume
- 364
- Issue
- 1838
- Pages
- 31-68
- ISSN
- 1364-503X (ISSN-L)
- 1471-2962
- OpenAlex
- W2029826026
- Cited by
- 919
- References
- 36
- FWCI
- 31.82
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.