The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Experimental Evidence of the Viscous Behavior of Grain Boundaries in Metals
Abstract
The mechanical behavior of grain boundaries in metals has been a subject of constant controversy. The present research is designed to examine thoroughly the mechanical behavior of grain boundaries in metals in a quantitative manner. A simple torsional apparatus has been devised for measuring four types of anelastic effects at very low stress levels, namely: internal friction at low frequencies; variation of dynamic rigidity with temperature; creep under constant stress; and stress relaxation at constant strain. All four types of anelastic effects have been studied in 99.991 percent polycrystalline aluminum as well as in single crystal aluminum; these effects are practically absent in single crystal aluminum. The four types of anelastic effects observed in polycrystalline aluminum are completely recoverable and are linear with respect to the applied stress and prior strain. They satisfy the interrelations derived by Zener from Boltzmann's superposition principle within experimental error. These are consistent with the viewpoint that the grain boundaries behave in a viscous manner. The maximum amount of shear stress relaxation in polycrystalline aluminum determined by the four types of anelastic measurements is about 33 percent. This is in good agreement with the theoretical value of 36 percent calculated by assuming the grain boundary to be viscous. The heat of activation associated with the viscous slip along the grain boundaries has been found to be 34,500 calories per mole. The coefficient of viscosity of the grain boundaries in aluminum estimated using this heat of activation, is consistent with that of molten aluminum at the same temperature. Similar anelastic effects have been also observed in polycrystalline magnesium, indicating that the viscous behavior is common to all metals.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Internal Friction in Solids II. General Theory of Thermoelastic Internal Friction
Zener, C. (1938) · Physical Review · doi:10.1103/physrev.53.90 · Cited by 779
Theory of the Elasticity of Polycrystals with Viscous Grain Boundaries
Zener, C. (1941) · Physical Review · doi:10.1103/physrev.60.906 · Cited by 218
Cited by
Diffusional Viscosity of a Polycrystalline Solid
Herring, C. (1950) · Journal of Applied Physics · doi:10.1063/1.1699681 · Cited by 2,487
CXVII. A theory of work-hardening of metal crystals
Mott, N. F. (1952) · The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science · doi:10.1080/14786441108521024 · Cited by 435
On the origin of the asthenosphere
Karato, S.-I. (2012) · Earth and Planetary Science Letters · doi:10.1016/j.epsl.2012.01.001 · Cited by 284
Thermal Conductivity: XII, Temperature Dependence of Conductivity for Single‐Phase Ceramics
KINGERY, W. D. (1955) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1955.tb14940.x · Cited by 147
Metadata
- Authors
- Kê, T.-S.
- Venue
- Physical Review
- Publisher
- American Physical Society (APS)
- Published
- 1947-04-15
- Volume
- 71
- Issue
- 8
- Pages
- 533-546
- ISSN
- 0031-899X (ISSN-L)
- OpenAlex
- W2019647468
- Cited by
- 783
- References
- 2
- FWCI
- 31.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.