The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Double Hysteresis Loop of BaTiO3at the Curie Point
Abstract
It is known that the Curie point $\ensuremath{\theta}$ of the ferroelectric BaTi${\mathrm{O}}_{3}$ shifts to higher temperatures when a dc bias field is applied. If the crystal shows a sharp transition, we expect by applying an ac field at the Curie temperature that the crystal would become alternately ferroelectric and nonferroelectric in the cycle of the ac field. This can be seen in the shape of the hysteresis loop at temperatures slightly above $\ensuremath{\theta}$. In the center of the polarization $P$ versus field $E$ plot, we observe a linear behavior corresponding to the paraelectric state of BaTi${\mathrm{O}}_{3}$ above $\ensuremath{\theta}$. At both high voltage ends, however, we observe a hysteresis loop corresponding to the ferroelectric state. A change in temperature causes a change in size and shape of the double hysteresis loops, ranging from a line with curves at the ends (higher temperature) to two overlapping loops (lower temperature). The results obtained allow us to calculate the different constants in the free-energy expression of Devonshire and Slater. One of the results shows that the transition is of the first order since the ${P}^{4}$ term turns out to be negative. The properties of the hysteresis loops are discussed, especially the large spontaneous electrical polarization and the low coercive field strength.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
XCVI. Theory of barium titanate: Part I
Devonshire, A. F. (1949) · The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science · doi:10.1080/14786444908561372 · Cited by 1,191
The Electric and Optical Behavior of BaTi O3 Single-Domain Crystals
Merz, W. J. (1949) · Physical Review · doi:10.1103/physrev.76.1221 · Cited by 694
Self-citationFerroelectricity and Antiferroelectricity in Ceramic PbZrO3Containing Ba or Sr
Shirane, G. (1952) · Physical Review · doi:10.1103/physrev.86.219 · Cited by 177
Cited by
Use of Negative Capacitance to Provide Voltage Amplification for Low Power Nanoscale Devices
Salahuddin, S., & Datta, S. (2008) · Nano Letters · doi:10.1021/nl071804g · Cited by 2,164
Perovskite lead-free dielectrics for energy storage applications
Yang, L., Kong, X., Li, F., Hao, H., Cheng, Z., Liu, H., Li, J.-F., & Zhang, S. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.12.005 · Cited by 1,957
Domain Formation and Domain Wall Motions in Ferroelectric BaTiO3Single Crystals
Merz, W. J. (1954) · Physical Review · doi:10.1103/physrev.95.690 · Cited by 1,382
Self-citationJin, L., Li, F., & Zhang, S. (2014) · Journal of the American Ceramic Society · doi:10.1111/jace.12773 · Cited by 1,229
Jo, W., Dittmer, R., Acosta, M., Zang, J., Groh, C., Sapper, E., Wang, K., & Rödel, J. (2012) · Journal of Electroceramics · doi:10.1007/s10832-012-9742-3 · Cited by 964
Metadata
- Authors
- Merz, W. J.
- Venue
- Physical Review
- Publisher
- American Physical Society (APS)
- Published
- 1953-08-01
- Volume
- 91
- Issue
- 3
- Pages
- 513-517
- ISSN
- 0031-899X (ISSN-L)
- OpenAlex
- W1661670887
- Cited by
- 580
- References
- 3
- FWCI
- 18.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.