The DOI matches its Crossref record.
Measurement of the thermal-expansion coefficient of nickel from 300 to 1000 K and determination of the power-law constants near the Curie temperature
Abstract
A fused-quartz dilatometer was used to measure the thermal-expansion coefficient $\ensuremath{\alpha}$ of nickel between 300 and 1000 K. Measurements on National Bureau of Standards certified copper and tungsten standards with the dilatometer established the uncertainty in the $\ensuremath{\alpha}$ measurements on nickel as \ifmmode\pm\else\textpm\fi{} 0.8% (\ifmmode\pm\else\textpm\fi{}0.10 \ifmmode\times\else\texttimes\fi{} ${10}^{\ensuremath{-}6}$ ${\mathrm{K}}^{\ensuremath{-}1}$), except within \ifmmode\pm\else\textpm\fi{} 2 K of the Curie temperature ${T}_{C}$ where the uncertainty was about \ifmmode\pm\else\textpm\fi{} 1.6%. Results of 38 investigations of the expansion of nickel reported in the literature were analyzed critically, resulting in a compilation of $\ensuremath{\alpha}$ of nickel from 0 to 1500 K. Theories of thermal expansion were employed to separate $\ensuremath{\alpha}$ into its paramagnetic ${\ensuremath{\alpha}}_{p}$ and magnetic ${\ensuremath{\alpha}}_{m}$ components. The calculated values of ${\ensuremath{\alpha}}_{m}$ near ${T}_{C}$ were fitted to the power-law equation, ${\ensuremath{\alpha}}_{m}=A({t}^{\ensuremath{-}a}\ensuremath{-}1){a}^{\ensuremath{-}1}+B$, that describes critical phenomena near the critical temperature [$t=(T\ensuremath{-}{T}_{C}){T}_{C}^{\ensuremath{-}1}$]. It was demonstrated that the critical exponents above and below ${T}_{C}$, $a$ and ${a}^{\ensuremath{'}}$, respectively, are the same as those derived from specific-heat measurements and that $a={a}^{\ensuremath{'}}=\ensuremath{-}0.093(\ifmmode\pm\else\textpm\fi{}0.010)$ in agreement with scaling laws of critical phenomena.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A review of chemical vapour deposition of graphene on copper
Mattevi, C., Kim, H., & Chhowalla, M. (2011) · J. Mater. Chem. · doi:10.1039/c0jm02126a · Cited by 1,452
Chemical vapor deposition of thin graphite films of nanometer thickness
Obraztsov, A. N., Obraztsova, E. A., Tyurnina, A. V., & Zolotukhin, A. A. (2007) · Carbon · doi:10.1016/j.carbon.2007.05.028 · Cited by 515
Zheng, Q., Braun, P. V., & Cahill, D. G. (2016) · Advanced Materials Interfaces · doi:10.1002/admi.201600234 · Cited by 51
Metadata
- Authors
- Kollie, T. G.
- Venue
- Physical Review B
- Publisher
- American Physical Society (APS)
- Published
- 1977-12-01
- Volume
- 16
- Issue
- 11
- Pages
- 4872-4881
- ISSN
- 0556-2805 (ISSN-L)
- OpenAlex
- W1990219185
- Cited by
- 198
- References
- 0
- FWCI
- 2.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.