The DOI matches its Crossref record.
Molecular dynamics simulation of atomic-scale friction
Abstract
Molecular dynamics simulations of nanoindentation followed by nanoscratching were conducted on single crystal aluminum (with the crystal set up in the (001) [100] orientation and scratching performed in the [100] direction) at extremely fine scratch depths (from 0.8 nm to almost zero) to investigate the atomic-scale friction. The friction coefficients at these depths were found to be rather high (\ensuremath{\sim}0.6), nearly constant, and independent of scratch depth except for zero depth when the magnitudes of the forces were extremely small. The high values of the friction coefficient even at these fine scratch depths are attributed to the finite value of the scratch force involved in breaking and reforming of the atomic bonds, the high negative rake angle generally presented by the indenter (in the present case -45\ifmmode^\circ\else\textdegree\fi{}) at fine scratch depths, which results in higher normal force (about twice the scratch force), and the absence of any lubricating film or contaminant between the sliding surfaces. The friction coefficient was also found to be close to the mean grinding coefficient, which is the ratio of the cutting to the thrust force with a high negative rake tool. Consequently, it appears that whenever material removal is involved in atomic-scale friction even at extremely fine scratch depths, the magnitude of the friction coefficient can be high, dependent on the rake angle presented by the tool, and independent of the normal force. This is because the magnitude of both normal and scratch forces increases with an increase in scratch depth and negative rake angle. Both the scratch hardness and indentation hardness were found to increase with decreasing scratch/indentation depth, strongly suggesting a size effect at fine scratch depths.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Diamond machining of silicon: A review of advances in molecular dynamics simulation
Goel, S., Luo, X., Agrawal, A., & Reuben, R. L. (2015) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2014.09.013 · Cited by 481
J. Phys.: Condens. Matter, 13, 619
(2001) · Journal of Physics Condensed Matter · doi:10.1088/0953-8984/13/31/202 · Cited by 206
Metadata
- Authors
- Komanduri, R., Chandrasekaran, N., & Raff, L. M.
- Venue
- Physical Review B
- Publisher
- American Physical Society (APS)
- Published
- 2000-05-15
- Volume
- 61
- Issue
- 20
- Pages
- 14007-14019
- ISSN
- 0163-1829 (ISSN-L)
- 1095-3795
- OpenAlex
- W1972529701
- Cited by
- 160
- References
- 0
- FWCI
- 3.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.