Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 259

The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.

Mn+1AXnphases in theTi−Si−Csystem studied by thin-film synthesis and ab initio calculations

Open access
Palmquist, J.-P., Li, S., Persson, P. O. Å., Emmerlich, J., Wilhelmsson, O., Högberg, H., Katsnelson, M. I., Johansson, B., Ahuja, R., Eriksson, O., Hultman, L., Jansson, U.·2004·Physical Review B

Abstract

Thin films of ${M}_{n+1}A{X}_{n}$ layered compounds in the $\mathrm{Ti}\text{\ensuremath{-}}\mathrm{Si}\text{\ensuremath{-}}\mathrm{C}$ system were deposited on $\mathrm{MgO}(111)$ and ${\mathrm{Al}}_{2}{\mathrm{O}}_{3}(0001)$ substrates held at $900\ifmmode^\circ\else\textdegree\fi{}\mathrm{C}$ using dc magnetron sputtering from elemental targets of $\mathrm{Ti}$, $\mathrm{Si}$, and $\mathrm{C}$. We report on single-crystal and epitaxial deposition of ${\mathrm{Ti}}_{3}{\mathrm{SiC}}_{2}$ (the previously reported $MAX$ phase in the $\mathrm{Ti}\text{\ensuremath{-}}\mathrm{Si}\text{\ensuremath{-}}\mathrm{C}$ system), a previously unknown $MAX$ phase ${\mathrm{Ti}}_{4}{\mathrm{SiC}}_{3}$ and another type of structure having the stoichiometry of ${\mathrm{Ti}}_{5}{\mathrm{Si}}_{2}{\mathrm{C}}_{3}$ and ${\mathrm{Ti}}_{7}{\mathrm{Si}}_{2}{\mathrm{C}}_{5}$. The latter two structures can be viewed as an intergrowth of 2 and 3 or 3 and 4 $M$ layers between each $A$ layer. In addition, epitaxial films of ${\mathrm{Ti}}_{5}{\mathrm{Si}}_{3}{\mathrm{C}}_{\mathrm{x}}$ were deposited and ${\mathrm{Ti}}_{5}{\mathrm{Si}}_{4}$ is also observed. First-principles calculations, based on density functional theory (DFT) of ${\mathrm{Ti}}_{n+1}{\mathrm{SiC}}_{n}$ for $n=1$,2,3,4 and the observed intergrown ${\mathrm{Ti}}_{5}{\mathrm{Si}}_{2}{\mathrm{C}}_{3}$ and ${\mathrm{Ti}}_{7}{\mathrm{Si}}_{2}{\mathrm{C}}_{5}$ structures show that the calculated difference in cohesive energy between the $MAX$ phases reported here and competing phases ($\mathrm{TiC}$, ${\mathrm{Ti}}_{3}{\mathrm{SiC}}_{2}$, ${\mathrm{TiSi}}_{2}$, and ${\mathrm{Ti}}_{5}{\mathrm{Si}}_{3}$) are very small. This suggests that the observed ${\mathrm{Ti}}_{5}{\mathrm{Si}}_{2}{\mathrm{C}}_{3}$ and ${\mathrm{Ti}}_{7}{\mathrm{Si}}_{2}{\mathrm{C}}_{5}$ structures at least should be considered as metastable phases. The calculations show that the energy required for insertion of a $\mathrm{Si}$ layer in the $\mathrm{TiC}$ matrix is independent of how close the $\mathrm{Si}$ layers are stacked. Hardness and electrical properties can be related to the number of $\mathrm{Si}$ layers per $\mathrm{Ti}$ layer. This opens up for designed thin film structures the possibility to tune properties.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1103/physrevb.70.165401

Cites

10 of 10 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 259

Metadata

Authors
Palmquist, J.-P., Li, S., Persson, P. O. Å., Emmerlich, J., Wilhelmsson, O., Högberg, H., Katsnelson, M. I., Johansson, B., Ahuja, R., Eriksson, O., Hultman, L., & Jansson, U.
Venue
Physical Review B
Published
2004-10-01
Volume
70
Issue
16
ISSN
  • 1098-0121 (ISSN-L)
  • 1550-235X
OpenAlex
W2058231323
Cited by
259
References
10
FWCI
8.54
Type
journal article
Language
en
Open access
bronze

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.