The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Superlubricity and tribochemistry of polyhydric alcohols
Open accessAbstract
The anomalous low friction of diamondlike carbon coated surfaces lubricated by pure glycerol was observed at $80\text{ }\ifmmode^\circ\else\textdegree\fi{}\text{C}$. Steel surfaces were coated with an ultrahard 1 \textmu{}m thick hydrogen-free tetrahedral coordinated carbon (ta-C) layer produced by physical vapor deposition. In the presence of glycerol, the friction coefficient is below 0.01 at steady state, corresponding to the so-called superlubricity regime (when sliding is then approaching pure rolling). This new mechanism of superlow friction is attributed to easy glide on triboformed OH-terminated surfaces. In addition to the formation of OH-terminated surfaces but at a lower temperature, we show here some evidence, by coupling experimental and computer simulations, that superlow friction of polyhydric alcohols could also be associated with triboinduced degradation of glycerol, producing a nanometer-thick film containing organic acids and water. Second, we show outstanding superlubricity of steel surfaces directly lubricated by a solution of myo-inositol (also called vitamin Bh) in glycerol at ambient temperature $(25\text{ }\ifmmode^\circ\else\textdegree\fi{}\text{C})$. For the first time, under boundary lubrication at high contact pressure, friction of steel is below 0.01 in the absence of any long chain polar molecules. The mechanism is still unknown but could be associated with friction-induced dissociation of glycerol and interaction of waterlike species with steel surface.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fluidity of Bound Hydration Layers
Raviv, U., & Klein, J. (2002) · Science · doi:10.1126/science.1074481 · Cited by 721
Cited by
A review of recent advances in tribology
Meng, Y., Xu, J., Jin, Z., Prakash, B., & Hu, Y. (2020) · Friction · doi:10.1007/s40544-020-0367-2 · Cited by 594
Ionic liquid lubricants: when chemistry meets tribology
Cai, M., Yu, Q., Liu, W., & Zhou, F. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00126k · Cited by 476
Superlubricity of carbon nanostructures
Chen, X., & Li, J. (2020) · Carbon · doi:10.1016/j.carbon.2019.11.077 · Cited by 264
Metadata
- Authors
- Matta, C., Joly-Pottuz, L., De Barros Bouchet, M. I., Martin, J. M., Kano, M., Zhang, Q., & Goddard, W. A.
- Venue
- Physical Review B
- Publisher
- American Physical Society (APS)
- Published
- 2008-08-28
- Volume
- 78
- Issue
- 8
- ISSN
- 1098-0121 (ISSN-L)
- 1550-235X
- OpenAlex
- W1972893278
- Cited by
- 218
- References
- 1
- FWCI
- 7.82
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.