The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Thermoelectric performance of lanthanum telluride produced via mechanical alloying
Abstract
Lanthanum telluride $({\text{La}}_{3\ensuremath{-}x}{\text{Te}}_{4})$ has been synthesized via mechanical alloying and characterized for thermoelectric performance. This work confirms prior reports of lanthanum telluride as a good high-temperature thermoelectric material, with $zT\ensuremath{\sim}1.1$ obtained at 1275 K. The thermoelectric performance is found to be better than that of SiGe, the current state-of-the-art high-temperature $n$-type thermoelectric material. Inherent self-doping of the system allows control over carrier concentration via sample stoichiometry. Prior high-temperature syntheses were prone to solute rejection in liquid and vapor phases, which resulted in inhomogeneous chemical composition and carrier concentration. The low-temperature synthesis provides homogeneous samples with acceptable control of the stoichiometry, and thus allows a thorough examination of the transition from a heavily doped degenerate semiconductor to a nondegenerate semiconductor. The effect of carrier concentration on the Hall mobility, Seebeck coefficient, thermal and electrical conductivity, lattice thermal conductivity, and thermoelectric compatibility are examined for $0.03\ensuremath{\le}x\ensuremath{\le}0.33$.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Complex thermoelectric materials
Snyder, G. J., & Toberer, E. S. (2008) · Nature Materials · doi:10.1038/nmat2090 · Cited by 11,455
Self-citationX-ray diffraction procedures for polycrystalline and amorphous materials
Klug, H. P., & Alexander, L. (1954) · Cited by 6,000
A simplified method for calculating the debye temperature from elastic constants
Anderson, O. L. (1963) · Journal of Physics and Chemistry of Solids · doi:10.1016/0022-3697(63)90067-2 · Cited by 3,684
X-ray diffraction procedures for polycrystal-line and amorphous materials
Lang, A. R. (1956) · Acta Metallurgica · doi:10.1016/0001-6160(56)90124-9 · Cited by 1,969
(2018) · CRC Press eBooks · doi:10.1201/9781420038903 · Cited by 1,911
Materials for thermoelectric energy conversion
Wood, C. (1988) · Reports on Progress in Physics · doi:10.1088/0034-4885/51/4/001 · Cited by 1,121
Some properties of semiconducting IrSb3
Slack, G. A., & Tsoukala, V. G. (1994) · Journal of Applied Physics · doi:10.1063/1.357750 · Cited by 554
Advanced semiconductor fundamentals
Pierret, R. F. (1987) · Cited by 437
Synthesis of copper, silver, and samarium chalcogenides by mechanical alloying
Ohtani, T., Maruyama, K., & Ohshima, K. (1997) · Materials Research Bulletin · doi:10.1016/s0025-5408(96)00188-2 · Cited by 57
Space Technology and Applications International Forum-Staif 2007
El-Genik, M. S. (2007) · Cited by 36
Cited by
High-performance bulk thermoelectrics with all-scale hierarchical architectures
Biswas, K., He, J., Blum, I. D., Wu, C.-I., Hogan, T. P., Seidman, D. N., Dravid, V. P., & Kanatzidis, M. G. (2012) · Nature · doi:10.1038/nature11439 · Cited by 4,740
Characterization of Lorenz number with Seebeck coefficient measurement
Kim, H.-S., Gibbs, Z. M., Tang, Y., Wang, H., & Snyder, G. J. (2015) · APL Materials · doi:10.1063/1.4908244 · Cited by 1,969
Self-citationBand Engineering of Thermoelectric Materials
Pei, Y., Wang, H., & Snyder, G. J. (2012) · Advanced Materials · doi:10.1002/adma.201202919 · Cited by 1,793
Self-citationPhonon engineering through crystal chemistry
Toberer, E. S., Zevalkink, A., & Snyder, G. J. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm11754h · Cited by 945
Self-citationOuyang, R., Curtarolo, S., Ahmetcik, E., Scheffler, M., & Ghiringhelli, L. M. (2018) · Physical Review Materials · doi:10.1103/physrevmaterials.2.083802 · Cited by 944
Metadata
- Authors
- May, A. F., Fleurial, J.-P., & Snyder, G. J.
- Venue
- Physical Review B
- Publisher
- American Physical Society (APS)
- Published
- 2008-09-19
- Volume
- 78
- Issue
- 12
- ISSN
- 1098-0121 (ISSN-L)
- 1550-235X
- OpenAlex
- W2046846099
- Cited by
- 271
- References
- 10
- FWCI
- 5.05
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.