Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 182

The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.

Effect of lattice mismatch on phonon transmission and interface thermal conductance across dissimilar material interfaces

Li, Xiaobo, Yang, Ronggui·2012·Physical Review B

Abstract

When phonons transport across a material interface, they experience reflection, transmission, and mode conversion, which results in a local temperature jump at the interface and thus dramatically changes the thermal conductivity of nanostructured materials. Phonon transmission across lattice-matched interfaces has been studied extensively in recent years with the atomistic Green's function (AGF) approach, which usually uses one unit cell to represent the cross section along the interface. However, modeling phonon transmission across realistic material interfaces is much more challenging because realistic interfaces are usually lattice-mismatched ones with atomic reconstruction, defects, and species mixing, which demands a larger cross-sectional area for the AGF simulation. In this paper, an integrated molecular dynamics (MD) and AGF approach is developed to study the phonon transmission across lattice-mismatched interfaces. MD simulation is used to simulate atomic reconstruction close to the interface. The recursive AGF approach is then employed to calculate frequency-dependent phonon transmission across lattice-mismatched interfaces with defects and species mixing, which addresses the numerical challenge in calculating phonon transmission for a relatively large cross-sectional area with reduced computational cost. The study of the relaxed interface formed from two semi-infinite bulk materials shows that lattice mismatch increases the lattice disorder and decreases the adhesion energy, which in turn lowers phonon transmission and reduces the interface thermal conductance across lattice-mismatched interfaces. Low-frequency phonons can be significantly scattered by increasing the defect size across the interface, while high-frequency phonons can be scattered almost completely (phonon transmission 0.1) across an alloyed layer as thin as 2.27 nm. The effect of lattice mismatch on phonon transmission becomes smaller for interfaces with defects and species mixing. The effect of annealing temperature on the Si/Ge interface thermal conductance was studied. A significant reduction of the Si/Ge interface thermal conductance was observed for a lattice-mismatched interface when annealed at high temperature, which agrees well with the available experimental data in literature.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1103/physrevb.86.054305

Cites

2 of 2 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Metadata

Authors
Li, X., & Yang, R.
Venue
Physical Review B
Published
2012-08-27
Volume
86
Issue
5
ISSN
  • 1098-0121 (ISSN-L)
  • 1550-235X
OpenAlex
W2318540057
Cited by
182
References
2
FWCI
4.78
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.