The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Frictionless bead packs have macroscopic friction, but no dilatancy
Open accessAbstract
The statement of the title is shown by numerical simulation of homogeneously sheared assemblies of frictionless, nearly rigid beads in the quasistatic limit. Results coincide for steady flows at constant shear rate $\stackrel{\ifmmode \dot{}\else \.{}\fi{}}{\ensuremath{\gamma}}$ in the limit of small $\stackrel{\ifmmode \dot{}\else \.{}\fi{}}{\ensuremath{\gamma}}$ and static approaches, in which packings are equilibrated under growing deviator stresses. The internal friction angle $\ensuremath{\varphi}$, equal to $5.76\ifmmode^\circ\else\textdegree\fi{}\ifmmode\pm\else\textpm\fi{}0.22\ifmmode^\circ\else\textdegree\fi{}$ in simple shear, is independent of average pressure $P$ in the rigid limit and stems from the ability of stable frictionless contact networks to form stress-induced anisotropic fabrics. No enduring strain localization is observed. Dissipation at the macroscopic level results from repeated network rearrangements, similar to the effective friction of a frictionless slider on a bumpy surface. Solid fraction $\ensuremath{\Phi}$ remains equal to the random close packing value $\ensuremath{\simeq}0.64$ in slowly or statically sheared systems. Fluctuations of stresses and volume are observed to regress in the large system limit. Defining the inertial number as $I=\stackrel{\ifmmode \dot{}\else \.{}\fi{}}{\ensuremath{\gamma}}\sqrt{m/(aP)}$, with $m$ the grain mass and $a$ its diameter, both internal friction coefficient ${\ensuremath{\mu}}^{\ensuremath{\ast}}=\text{tan}\text{ }\ensuremath{\varphi}$ and volume $1/\ensuremath{\Phi}$ increase as powers of $I$ in the quasistatic limit of vanishing $I$, in which all mechanical properties are determined by contact network geometry. The microstructure of the sheared material is characterized with a suitable parametrization of the fabric tensor and measurements of coordination numbers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A discrete numerical model for granular assemblies
Cundall, P. A., & Strack, O. D. L. (1979) · Géotechnique · doi:10.1680/geot.1979.29.1.47 · Cited by 17,527
Cited by
Yield stress materials in soft condensed matter
Bonn, D., Denn, M. M., Berthier, L., Divoux, T., & Manneville, S. (2017) · Reviews of Modern Physics · doi:10.1103/revmodphys.89.035005 · Cited by 899
Discontinuous Shear Thickening without Inertia in Dense Non-Brownian Suspensions
Wyart, M., & Cates, M. E. (2014) · Physical Review Letters · doi:10.1103/physrevlett.112.098302 · Cited by 560
The physics of jamming for granular materials: a review
Behringer, R. P., & Chakraborty, B. (2019) · Reports on Progress in Physics · doi:10.1088/1361-6633/aadc3c · Cited by 318
Metadata
- Authors
- Peyneau, P.-E., & Roux, J.-N.
- Venue
- Physical Review E
- Publisher
- American Physical Society (APS)
- Published
- 2008-07-28
- Volume
- 78
- Issue
- 1
- Pages
- 011307-011307
- ISSN
- 1539-3755 (ISSN-L)
- 1550-2376
- OpenAlex
- W2135679145
- Cited by
- 214
- References
- 1
- FWCI
- 7.35
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.