The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Ductile Bulk Metallic Glass
Abstract
We report on experimental evidence of pronounced global plasticity measured in monolithic Pt57.5Cu14.7Ni5.3P22.5 bulk metallic glass under both bending and unconfined compression loading conditions. A plastic strain of 20% is measured, never before seen in metallic glasses. Also, permanent deformation and a strain exceeding 3% before failure is observed during bending of 4 mm thick samples. To date, no monolithic metallic material has exhibited such a combination of high strength, extensive ductility, and high elastic limit. The large plasticity is reflected in a high Poisson ratio of 0.42, which causes the tip of a shear band to extend rather than initiate a crack. This results in the formation of multiple shear bands and is the origin of the observed large global ductility and very high fracture toughness, approximately 80 MPa m(-1/2).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A microscopic mechanism for steady state inhomogeneous flow in metallic glasses
Spaepen, F. (1977) · Acta Metallurgica · doi:10.1016/0001-6160(77)90232-2 · Cited by 2,933
Bulk Glass-Forming Metallic Alloys: Science and Technology
Johnson, W. L. (1999) · MRS Bulletin · doi:10.1557/s0883769400053252 · Cited by 2,444
Self-citationGreer, A. L. (1995) · Science · doi:10.1126/science.267.5206.1947 · Cited by 1,670
Formation of bulk metallic glass by fluxing
Kui, H. W., Greer, A. L., & Turnbull, D. (1984) · Applied Physics Letters · doi:10.1063/1.95330 · Cited by 602
Cited by
Mechanical behavior of amorphous alloys
SCHUH, C., HUFNAGEL, T., & RAMAMURTY, U. (2007) · Acta Materialia · doi:10.1016/j.actamat.2007.01.052 · Cited by 3,372
Atomic-level structure and structure–property relationship in metallic glasses
Cheng, Y. Q., & Ma, E. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2010.12.002 · Cited by 1,771
Designing metallic glass matrix composites with high toughness and tensile ductility
Hofmann, D. C., Suh, J.-Y., Wiest, A., Duan, G., Lind, M.-L., Demetriou, M. D., & Johnson, W. L. (2008) · Nature · doi:10.1038/nature06598 · Cited by 1,501
Self-citationMetallic glasses as structural materials
ASHBY, M., & GREER, A. (2006) · Scripta Materialia · doi:10.1016/j.scriptamat.2005.09.051 · Cited by 1,472
The elastic properties, elastic models and elastic perspectives of metallic glasses
Wang, W. H. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.07.001 · Cited by 1,362
Metadata
- Authors
- Schroers, J., & Johnson, W. L.
- Venue
- Physical Review Letters
- Publisher
- American Physical Society (APS)
- Published
- 2004-12-16
- Volume
- 93
- Issue
- 25
- Pages
- 255506-255506
- ISSN
- 0031-9007 (ISSN-L)
- 1079-7114
- OpenAlex
- W1972336387
- Cited by
- 1,085
- References
- 4
- FWCI
- 155.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.