The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Lasers and materials in selective laser sintering
Abstract
Selective laser sintering (SLS) is one of the most rapidly growing rapid prototyping techniques (RPT). This is mainly due to its suitability to process almost any material: polymers, metals, ceramics (including foundry sand) and many types of composites. The material should be supplied as powder that may occasionally contain a sacrificial polymer binder that has to be removed (debinded) afterwards. The interaction between the laser beam and the powder material used in SLS is one of the dominant phenomena that defines the feasibility and quality of any SLS process. This paper surveys the current state of SLS in terms of materials and lasers. It describes investigations carried out experimentally and by numerical simulation in order to get insight into laser-material interaction and to control this interaction properly.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Progress in Additive Manufacturing and Rapid Prototyping
Kruth, J.-P., Leu, M. C., & Nakagawa, T. (1998) · CIRP Annals · doi:10.1016/s0007-8506(07)63240-5 · Cited by 1,331
Self-citationMaterial Incress Manufacturing by Rapid Prototyping Techniques
Kruth, J. P. (1991) · CIRP Annals · doi:10.1016/s0007-8506(07)61136-6 · Cited by 657
Self-citationAbsorptance of powder materials suitable for laser sintering
Tolochko, N. K., Khlopkov, Y. V., Mozzharov, S. E., Ignatiev, M. B., Laoui, T., & Titov, V. I. (2000) · Rapid Prototyping Journal · doi:10.1108/13552540010337029 · Cited by 518
Self-citationDirect Selective Laser Sintering of Hard Metal Powders: Experimental Study and Simulation
Wang, X. C., Laoui, T., Bonse, J., Kruth, J. P., Lauwers, B., & Froyen, L. (2002) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s001700200024 · Cited by 258
Self-citationDirect laser freeform fabrication of high performance metal components
Das, S., Beama, J. J., Wohlert, M., & Bourell, D. L. (1998) · Rapid Prototyping Journal · doi:10.1108/13552549810222939 · Cited by 131
Powder deposition in selective metal powder sintering
der Schueren, B. V., & Kruth, J. (1995) · Rapid Prototyping Journal · doi:10.1108/13552549510094241 · Cited by 86
Self-citationBasic Powder Metallurgical Aspects in Selective Metal Powder Sintering
Kruth, J., der Schueren, B. V., Bonse, J., & Morren, B. (1996) · CIRP Annals · doi:10.1016/s0007-8506(07)63043-1 · Cited by 78
Self-citationSong, Y., & Koenig, W. (1997) · CIRP Annals · doi:10.1016/s0007-8506(07)60790-2 · Cited by 74
Himmer, T., Nakagawa, T., & Anzai, M. (1999) · Computers in Industry · doi:10.1016/s0166-3615(98)00122-5 · Cited by 64
A Simulation Model for Direct Selective Laser Sintering of Metal Powders
Wang, X. C., & Kruth, J.-P. (2009) · Civil-comp proceedings · doi:10.4203/ccp.67.1.7 · Cited by 23
Self-citation
Cited by
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
A Review of Additive Manufacturing
Wong, K. V., & Hernandez, A. (2012) · ISRN Mechanical Engineering · doi:10.5402/2012/208760 · Cited by 2,555
The metallurgy and processing science of metal additive manufacturing
Sames, W. J., List, F. A., Pannala, S., Dehoff, R. R., & Babu, S. S. (2016) · International Materials Reviews · doi:10.1080/09506608.2015.1116649 · Cited by 2,529
3D printing of ceramics: A review
Chen, Z., Li, Z., Li, J., Liu, C., Lao, C., Fu, Y., Liu, C., Li, Y., Wang, P., & He, Y. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.11.013 · Cited by 2,109
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
Metadata
- Authors
- Kruth, J. P., Wang, X., Laoui, T., & Froyen, L.
- Venue
- Assembly Automation
- Publisher
- Emerald
- Published
- 2003-12-01
- Volume
- 23
- Issue
- 4
- Pages
- 357-371
- ISSN
- 0144-5154 (ISSN-L)
- 1758-4078
- OpenAlex
- W2130522179
- Cited by
- 826
- References
- 10
- FWCI
- 16.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.