Medical rapid prototyping applications and methods
The DOI matches its Crossref record.
Abstract
Purpose: Aims to investigate medical rapid prototyping (medical RP) technology applications and methods based on reverse engineering (RE) and medical imaging data. Design/methodology/approach: Medical image processing and RE are applied to construct three‐dimensional models of anatomical structures, from which custom‐made (personalized) medical applications are developed. Findings: The investigated methods were successfully used for design and manufacturing of biomodels, surgical aid tools, implants, medical devices and surgical training models. More than 40 medical RP applications were implemented in Europe and Asia since 1999. Research limitations/implications: Medical RP is a multi‐discipline area. It involves in many human resources and requires high skills and know‐how in both engineering and medicine. In addition, medical RP applications are expensive, especially for low‐income countries. These practically limit its benefits and applications in hospitals. Practical implications: In order to transfer medical RP into hospitals successfully, a good link and close collaboration between medical and engineering sites should be established. Moreover, new medical applications should be developed in the way that does not change the traditional approaches that medical doctors (MD) were trained, but provides solutions to improve the diagnosis and treatment quality. Originality/value: The presented state‐of‐the‐art medical RP is applied for diagnosis and treatment in the following medical areas: cranio‐maxillofacial and dental surgery, neurosurgery, orthopedics, orthosis and tissue engineering. The paper is useful for MD (radiologists and surgeons), biomedical and RP/CAD/CAM engineers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
Polymeric Biomaterials for Medical Implants and Devices
Teo, A. J. T., Mishra, A., Park, I., Kim, Y.-J., Park, W.-T., & Yoon, Y.-J. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5b00429 · Cited by 778
A review of rapid prototyping techniques for tissue engineering purposes
Peltola, S. M., Melchels, F. P. W., Grijpma, D. W., & Kellomäki, M. (2008) · Annals of Medicine · doi:10.1080/07853890701881788 · Cited by 751
Additive manufacturing techniques for the production of tissue engineering constructs
Mota, C., Puppi, D., Chiellini, F., & Chiellini, E. (2015) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1635 · Cited by 382
Emerging Applications of Bedside 3D Printing in Plastic Surgery
Chae, M. P., Rozen, W. M., McMenamin, P. G., Findlay, M. W., Spychal, R. T., & Hunter-Smith, D. J. (2015) · Frontiers in Surgery · doi:10.3389/fsurg.2015.00025 · Cited by 377
Metadata
- Authors
- Hieu, L. C., Zlatov, N., Vander Sloten, J., Bohez, E., Khanh, L., Binh, P. H., Oris, P., & Toshev, Y.
- Venue
- Assembly Automation
- Publisher
- Emerald
- Published
- 2005-12-01
- Volume
- 25
- Issue
- 4
- Pages
- 284-292
- ISSN
- 0144-5154 (ISSN-L)
- OpenAlex
- W1972388204
- Cited by
- 150
- References
- 0
- FWCI
- 3.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Medical rapid prototyping applications and methods. https://app.cochat.ai/papers/10.1108/01445150510626415
- The paper
- Hieu, L. C., Zlatov, N., Vander Sloten, J., Bohez, E., Khanh, L., Binh, P. H., Oris, P., & Toshev, Y. (2005). Medical rapid prototyping applications and methods. Assembly Automation. https://doi.org/10.1108/01445150510626415
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.