The DOI matches its Crossref record.
Feedstock material property – process relationships in fused deposition of ceramics (FDC)
Abstract
Fused deposition of ceramics (FDC) is a solid freeform fabrication technique based on extrusion of highly loaded polymer systems. The process utilizes particle loaded thermoplastic binder feedstock in the form of a filament. The filament acts as both the piston driving the extrusion and also the feedstock being deposited. Filaments can fail during FDC via buckling, when the extrusion pressure needed is higher than the critical buckling load that the filament can support. Compressive elastic modulus determines the load carrying ability of the filament and the viscosity determines the resistance to extrusion (or extrusion pressure). A methodology for characterizing the compressive mechanical properties of FDC filament feedstocks has been developed. It was found that feedstock materials with a ratio (E/ηa) greater than a critical value (3×10 5 to 5×10 5 s‐1) do not buckle during FDC while those with a ratio less than this range buckle.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A review of melt extrusion additive manufacturing processes: I. Process design and modeling
N. Turner, B., Strong, R., & A. Gold, S. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-01-2013-0012 · Cited by 1,450
Additive manufacturing methods and modelling approaches: a critical review
Bikas, H., Stavropoulos, P., & Chryssolouris, G. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7576-2 · Cited by 1,427
Turner, B. N., & Gold, S. A. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-02-2013-0017 · Cited by 770
Development of new metal/polymer materials for rapid tooling using Fused deposition modelling
Masood, S. H., & Song, W. Q. (2004) · Materials & Design · doi:10.1016/j.matdes.2004.02.009 · Cited by 543
Shor, L., Güçeri, S., Wen, X., Gandhi, M., & Sun, W. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.08.018 · Cited by 494
Metadata
- Authors
- Venkataraman, N., Rangarajan, S., Matthewson, M. J., Harper, B., Safari, A., Danforth, S. C., Wu, G., Langrana, N., Guceri, S., & Yardimci, A.
- Venue
- Rapid Prototyping Journal
- Publisher
- Emerald
- Published
- 2000-12-01
- Volume
- 6
- Issue
- 4
- Pages
- 244-253
- ISSN
- 1355-2546 (ISSN-L)
- OpenAlex
- W2048138558
- Cited by
- 188
- References
- 0
- FWCI
- 2.30
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Feedstock material property – process relationships in fused deposition of ceramics (FDC). https://app.cochat.ai/papers/10.1108/13552540010373344
- The paper
- Venkataraman, N., Rangarajan, S., Matthewson, M. J., Harper, B., Safari, A., Danforth, S. C., Wu, G., Langrana, N., Guceri, S., & Yardimci, A. (2000). Feedstock material property – process relationships in fused deposition of ceramics (FDC). Rapid Prototyping Journal. https://doi.org/10.1108/13552540010373344
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.