The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Redesign and cost estimation of rapid manufactured plastic parts
Abstract
Purpose: The purpose of this paper is to highlight how rapid manufacturing (RM) of plastic parts combined with part redesign could have positive repercussion on cost saving. Design/methodology/approach: Comparison between two different technologies for plastic part production, the traditional injection molding (IM) and the emergent RM, is done with consideration of both the geometric possibilities of RM and the economic aspect. From an extended literature review, the redesign guidelines and the cost model are identified and then applied to a component selected for its shape complexity. It is an assembly that was redesigned for RM purpose, in order to take advantage of additive manufacturing potentialities. The geometric and economic differences between IM and RM are discussed. Findings: This research evidences that currently in Western Europe RM combined with redesign can be economically convenient and competitive to IM for medium volume production of plastic parts. Consequently, this is a great opportunity to keep the production in Europe instead of moving it overseas. Research limitations/implications: As regards manufacturing costs, results presented in this study are mainly based on cost estimation provided by Italian companies and it is assumed that the plant is located in Western Europe. Practical implications: The research assesses the feasibility of making functional and operational plastic parts without the use of traditional manufacturing processes by redesign for RM. Originality/value: Two different kinds of research papers comparing RM and IM exist in literature: on the one hand, the two techniques are evaluated from the economical point of view, on the other, the part redesign is analyzed. No paper considers the interrelation between redesign and cost estimation. In this work, these aspects are combined to point out that a remarkable cost reduction is obtained when the component shape is modified to exploit RM advantages.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Rochus, P., Plesseria, J.-Y., Van Elsen, M., Kruth, J.-P., Carrus, R., & Dormal, T. (2007) · Acta Astronautica · doi:10.1016/j.actaastro.2007.01.004 · Cited by 141
Cited by
Wang, X., Xu, S., Zhou, S., Xu, W., Leary, M., Choong, P., Qian, M., Brandt, M., & Xie, Y. M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.012 · Cited by 2,121
Additive manufacturing: Challenges, trends, and applications
Abdulhameed, O., Al-Ahmari, A., Ameen, W., & Mian, S. H. (2019) · Advances in Mechanical Engineering · doi:10.1177/1687814018822880 · Cited by 861
The mass customization decade: An updated review of the literature
Fogliatto, F. S., da Silveira, G. J. C., & Borenstein, D. (2012) · International Journal of Production Economics · doi:10.1016/j.ijpe.2012.03.002 · Cited by 710
Economics of additive manufacturing for end-usable metal parts
Atzeni, E., & Salmi, A. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3878-1 · Cited by 630
Self-citationMetal additive manufacturing in the commercial aviation industry: A review
Gisario, A., Kazarian, M., Martina, F., & Mehrpouya, M. (2019) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2019.08.005 · Cited by 574
Metadata
- Authors
- Atzeni, E., Iuliano, L., Minetola, P., & Salmi, A.
- Venue
- Rapid Prototyping Journal
- Publisher
- Emerald
- Published
- 2010-08-03
- Volume
- 16
- Issue
- 5
- Pages
- 308-317
- ISSN
- 1355-2546 (ISSN-L)
- OpenAlex
- W2042256523
- Cited by
- 205
- References
- 1
- FWCI
- 9.11
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Redesign and cost estimation of rapid manufactured plastic parts. https://app.cochat.ai/papers/10.1108/13552541011065704
- The paper
- Atzeni, E., Iuliano, L., Minetola, P., & Salmi, A. (2010). Redesign and cost estimation of rapid manufactured plastic parts. Rapid Prototyping Journal. https://doi.org/10.1108/13552541011065704
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.