The DOI matches its Crossref record.
Effect of process parameters settings and thickness on surface roughness of EBM produced Ti‐6Al‐4V
Abstract
Purpose – Ti-6Al-4V is one of the most attractive materials being used in aerospace, automotive and medical implant industries. Electron beam melting (EBM) is one of the direct digital manufacturing methods to produce complex geometries of fully dense and near net shape parts. The EBM system provides an opportunity to built metallic objects with different processing parameter settings like beam current, scan speed, probe size on powder, etc. The purpose of this paper is to determine and understand the effect of part's thickness and variation in process parameter settings of the EBM system on surface roughness/topography of EBM fabricated Ti-6Al-4V metallic parts. \n \nDesign/methodology/approach – A mathematical model based upon response surface methodology (RSM) is developed to study the variation of surface roughness with changing process parameter settings. Surface roughness of the test slabs produced with different parameter settings and thickness has been studied under confocal microscope. Response surface methodology was used to develop a multiple regression model to correlate the effect of variation in EBM process parameters settings and thickness of parts on surface roughness of EBM produced Ti-6Al-4V. \n \nFindings – It has been observed that every part produced by EBM system has detectable surface roughness. The surface roughness parameter Ra varies between 1-20 µm for different samples depending upon the process parameter setting and thickness. The Ra value increases with increasing sample thickness and beam current, and decreases with increase in offset focus and scan speed. \n \nOriginality/value – Surface roughness is related to wear and friction property of the material and hence is related to the life time and performance of the part. Surface roughness is an important property of any material to be considered as biomaterial. The surface roughness of the material depends upon the manufacturing method and environment and hence it is controllable either during fabrication or by post processing. From the 1st order regression model developed in this study, it is also evident that sample thickness, scan speed and beam current have relatively more effect on roughness value then the offset focus. With the model obtained equation, a designer can subsequently select the best combination of sample thickness and process parameter values to achieve desired surface roughness.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Metal Additive Manufacturing: A Review of Mechanical Properties
Lewandowski, J. J., & Seifi, M. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032024 · Cited by 1,722
Additive manufacturing of metallic components by selective electron beam melting — a review
Körner, C. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1176289 · Cited by 1,106
Surface texture metrology for metal additive manufacturing: a review
Townsend, A., Senin, N., Blunt, L., Leach, R. K., & Taylor, J. S. (2016) · Precision Engineering · doi:10.1016/j.precisioneng.2016.06.001 · Cited by 743
A literature review of powder-based electron beam melting focusing on numerical simulations
Galati, M., & Iuliano, L. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.11.001 · Cited by 300
Geometrical metrology for metal additive manufacturing
Leach, R. K., Bourell, D., Carmignato, S., Donmez, A., Senin, N., & Dewulf, W. (2019) · CIRP Annals · doi:10.1016/j.cirp.2019.05.004 · Cited by 289
Metadata
- Authors
- Safdar, A., He, H. Z., Wei, L., Snis, A., & Chavez de Paz, L. E.
- Venue
- Rapid Prototyping Journal
- Publisher
- Emerald
- Published
- 2012-07-27
- Volume
- 18
- Issue
- 5
- Pages
- 401-408
- ISSN
- 1355-2546 (ISSN-L)
- OpenAlex
- W1989716051
- Cited by
- 214
- References
- 0
- FWCI
- 3.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of process parameters settings and thickness on surface roughness of EBM produced Ti‐6Al‐4V. https://app.cochat.ai/papers/10.1108/13552541211250391
- The paper
- Safdar, A., He, H. Z., Wei, L., Snis, A., & Chavez de Paz, L. E. (2012). Effect of process parameters settings and thickness on surface roughness of EBM produced Ti‐6Al‐4V. Rapid Prototyping Journal. https://doi.org/10.1108/13552541211250391
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.