The DOI matches its Crossref record.
Advances in modeling the effects of selected parameters on the SLS process
Abstract
Selective laser sintering (SLS) is a leading process for developing rapid prototype objects by selectively fusing layers of powder according to numerically defined cross‐sectional geometry. The process has the potential to become an indispensable industrial tool. However, continuous process improvement is necessary. Improved understanding of the parameter effects on the process response is expected to lead to process advances. In this work the analytical problem describing the energy delivery, heat transfer and sintering process along with other pertinent phenomena is studied. Physical experiments and implementation of a numerical simulation are conducted using Bisphenol‐A polycarbonate. The effects of selected parameters on the SLS process response are examined. The primary parameters of interest are the laser power, laser beam velocity, hatch spacing, laser beam spot size and scan line length. This work shows that the secondary process parameters, delay period and number of effective exposures have a significant influence on the process response.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
King, W. E., Anderson, A. T., Ferencz, R. M., Hodge, N. E., Kamath, C., Khairallah, S. A., & Rubenchik, A. M. (2015) · Applied Physics Reviews · doi:10.1063/1.4937809 · Cited by 1,258
Laser sintering of polyamides and other polymers
Goodridge, R. D., Tuck, C. J., & Hague, R. J. M. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.04.001 · Cited by 835
Direct laser sintering of metal powders: Mechanism, kinetics and microstructural features
Simchi, A. (2006) · Materials Science and Engineering: A · doi:10.1016/j.msea.2006.04.117 · Cited by 590
Mesoscopic simulation of selective beam melting processes
Körner, C., Attar, E., & Heinl, P. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.12.016 · Cited by 450
Lasers in additive manufacturing: A review
Lee, H., Lim, C. H. J., Low, M. J., Tham, N., Murukeshan, V. M., & Kim, Y.-J. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0037-7 · Cited by 449
Metadata
- Authors
- Williams, J. D., & Deckard, C. R.
- Venue
- Rapid Prototyping Journal
- Publisher
- Emerald
- Published
- 1998-06-01
- Volume
- 4
- Issue
- 2
- Pages
- 90-100
- ISSN
- 1355-2546 (ISSN-L)
- OpenAlex
- W2023049346
- Cited by
- 228
- References
- 0
- FWCI
- 2.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Advances in modeling the effects of selected parameters on the SLS process. https://app.cochat.ai/papers/10.1108/13552549810210257
- The paper
- Williams, J. D., & Deckard, C. R. (1998). Advances in modeling the effects of selected parameters on the SLS process. Rapid Prototyping Journal. https://doi.org/10.1108/13552549810210257
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.