CoChat

Machine learning approach for the prediction of mixed lubrication parameters for different surface topographies of non-conformal rough contacts

Prajapati, Deepak Kumar, Katiyar, Jitendra Kumar, Prakash, Chander · 2023 · Industrial Lubrication and Tribology

The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.

Abstract

Purpose This study aims to use a machine learning (ML) model for the prediction of traction coefficient and asperity load ratio for different surface topographies of non-conformal rough contacts. Design/methodology/approach The input data set for the ML model is generated using a mixed-lubrication model. Surface topography parameters (skewness, kurtosis and pattern ratio), rolling speed and hardness are used as input features in the multi-layer perceptron (MLP) model. The hyperparameter tuning and fivefold cross-validation are also performed to minimize the overfitting. Findings From the results, it is shown that the MLP model shows excellent accuracy (R2 > 90%) on the test data set for making the prediction of mixed lubrication parameters. It is also observed that engineered rough surfaces with high negative skewness, low kurtosis and isotropic surface patterns exhibit a significant low traction coefficient. It is also concluded that the MLP model gives better accuracy in comparison to the random forest regression model based on the training and testing data sets. Originality/value Mixed lubrication parameters are predicted by developing a regression-based MLP model. The machine learning model is trained using several topography parameters, which are vital in the mixed-EHL regime because of the lack of regression-fit expressions in previous works. The accuracy of MLP with random forest models is also compared.

Overview

Integrity signals

Registry

Crossref · 10.1108/ilt-04-2023-0121

Cites

36 of 36 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Citations

Cites

Show all 36 references

Research works printed but not linked: 2

  1. Ling, 2022, Friction model of elastic-plastic line contact in mixed-lubrication regime with non-Newtonian lubricants, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 236, 1
  2. Wang, 2017, Simulation and measurements of sliding friction between rough surfaces in point contacts: from EHL to boundary lubrication, Journal of Tribology, 129, 495, 10.1115/1.2736432 · DOI

Cited by

See all 19

Metadata

Authors
Prajapati, D. K., Katiyar, J. K., & Prakash, C.
Affiliations
  • Lovely Professional University (IN)
  • SRM Institute of Science and Technology (IN)
Venue
Industrial Lubrication and Tribology
Publisher
Emerald
Published
2023-09-15
Volume
75
Issue
9
Pages
1022-1030
ISSN
  • 0036-8792 (ISSN-L)
  • 1758-5775
OpenAlex
W4386718014
Cited by
19
References
33
Citations by year
2026: 3 · 2025: 6 · 2024: 10
FWCI
1.87
Type
journal article
Language
en
Open access
closed
Locations
Industrial Lubrication and Tribology (publishedVersion)
Topics
  • Physical Sciences › Engineering › Mechanical Engineering › Tribology and Lubrication Engineering
  • Physical Sciences › Engineering › Mechanical Engineering › Lubricants and Their Additives
  • Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
Keywords
mixed lubrication, traction coefficient, surface topography, elastohydrodynamic lubrication, multilayer perceptron, random forest regression, surface roughness parameters, skewness, kurtosis, rolling speed, hardness

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Machine learning approach for the prediction of mixed lubrication parameters for different surface topographies of non-conformal rough contacts. https://app.cochat.ai/papers/10.1108/ilt-04-2023-0121
The paper
Prajapati, D. K., Katiyar, J. K., & Prakash, C. (2023). Machine learning approach for the prediction of mixed lubrication parameters for different surface topographies of non-conformal rough contacts. Industrial Lubrication and Tribology. https://doi.org/10.1108/ilt-04-2023-0121

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.